SOLE SOURCE - redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$100k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document number) _31070420-422 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Johnson Industries LTD

Manufacturer POC & Phone Nr. Ian Rauseo @ (604) 940-4555 Mfr. Address_6500 Dennett PL. Delta BC, Canada V4G 1N4 Manufacturers Dealer/Rep Johnson Industries LTD Dealer/Rep Address/Phone Number Ian Rauseo @ (604) 940-4555 Ext 110

✔ _Description of the item or service required, the estimated cost, and required delivery date. PN: BAH1140 ACTUATOR ASSEMBLY , PN: BAH1018 ACTUATOR ASSEMBLY

✔_Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

THE JOHNSON BRAKE COMPONENTS ARE SPECIFICALLY DESIGNED TO BE INSTALLED ON THE BRAKE ACTUATORS FOR THE HOISTS ON EACH CRANE PER THE P-307 "CORPORATE LIFTING AND HANDLING

MANUAL", ANY BRAND CHANGES WOULD VIOLATE THE ORIGINAL OEMCRANE CONFIGURATION AND SUBJEXT THE CRANE EMPLOYES TO RISK ASSOCIATED WITH PART FAILURE.

THE OEM REPLACEMENT DIESEL IS THE ONLY PARTCERTIFIED AS COMPATIBLE WITH THE EXISTING CRANE SYSTEM AND REPRESENTS THE MINIMUM NEED TO THE GOVERNMENT.

✔_The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_✔ _The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

THE JOHNSON INDUSTRIES LTD ACTUATORS ARE COMPATIBLE IN ALL ASPECTS FOR FORM, FIT, FUNCTION WITH THE EXISTING SYSTEMS AS THEY ARE THE

"DIRECT REPLACEMENT" OF THE ORIGINAL OEM CONFIGURATION.

_✔ _A patent, copyright, or proprietary data limits competition. The proprietary data is:

JOHNSON INDUSTRIES LTD IS THE ORIGINAL EQUIPMENT MANUFACTURER (OEM) OF THE SYSTEM, CONTRACTOR AND PROPRIETARY RESTRAINTS MAY APPLY.

_✔ _These are “direct replacements” parts/components for existing brand name equipment.

_ _Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Title Date 0

Contracting Officer Signature Date

Rev 02/11/10