SOLE SOURCE- REDACTED.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on JML DOC#: 30791670 through 30791677 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: AUTOMETRIX, INC.

Manufacturer POC & Phone Nr. SCOTT ALLEN 1-530-477-5065 Mfr. Address 12098 CHARLES DRIVE, GRASS VALLEY, CA 95945 Manufacturers Dealer/Rep SAME AS MANUFACTURER Dealer/Rep Address/Phone Number SAME AS MANUFACTURER

X Description of the item or service required, the estimated cost, and required delivery date.

AUTOMATED PRECISION CUTTING/PLOTTING MACHINE, 73" x 10" CUTTING AREA, S&H, ASSEMBLY, INSTALLATION, AND TRAINING

X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

THE MACHINE IS DESIGNED TO HANDLE A MAX. MATERIAL THICKNESS OF 2 INCHES (LOFTED) ALLOWING FOR THE MOST COMMON INSULATING MATERIALS; CLOTH, FELT GLASS, BARIUM-SULFATE VINYL, AND ELASTOMERIC FOAM RUBBER TO BE PLOTTED AND CUT WITHOUT THE USE OF WATERJET CUTTING SYSTEMS.

X The requested material or service represents the minimum requirements of the

Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are "direct replacements" parts/components for existing brand name equipment.

_X_Other information to support a sole-source buy:

SYSTEM HAS BEEN APPROVED BY C/980S.l: Industrial Engineer, LEONARD BLOCHER TO MEET FACILITY

INFRASTRUCTURE.

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Signature Date

Contracting Officer Signature Date

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018