SOLE SOURCE-REDACTED.pdf

Signature Activity

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on 2208-0420 through 2208-0425 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: LINK-BELT CRANES Manufacturer: POC & Phone Number: JAY IVERSON 1-253-722-5560

Mfr. Address: 2651 PALUMBO DRIVE LEXINTON, KY 40509 Manufacturers Dealer/Rep: TRIAD MACHINERY

Dealer/Rep Address/Phone Number: Triad Machinery 2323 E. Q STREET TACOMA WA 98411 1- 800-622-8876

X Description of the item or service required, the estimated cost, and required delivery date.

1EA-P/N CEB0738 LINKBELT TURNTABLE ROTATE BEARING, 18EA-P/NCPB0853 BOLT, 14EA-P/N:CPB0901 BOLT HIGH STRENGTH , 4EA-P/N:CPB0854 BOLT, 30EA-

P/N:BEA1079 WASHER, -P/N:J951033 NUT

X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

THE LINKBELT TURNTABLE BEARING AND ALL ASSOCIATED HARDWARE ARE DIRECT REPLACEMENTS OF WHAT IS INSTALLED ON THE CRANE. PER THE P-307 “CORPORATE LIFTING AND HANDLING MANUAL”, ANY BRAND CHANGES WOULD VIOLATE THE ORIGINAL OEM CRANE CONFIGURATION AND SUBJECT THE CRANE AND

EMPLOYEES TO RISKS ASSOCIATED WITH PART FAILURE

X The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

X The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Just Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

THE LINKBELT TURNTABLE ROTATE BEARING AND ASSOCIATED HARDWARE ARE COMPATIBLE IN ALL ASPECTS FOR FORM, FIT, AND FUNCTION WITH THE EXISTING SYSTEMS AS IT IS A “DIRECT REPLACEMENT” OF THE ORIGINAL OEM CONFIGURATION

X A patent, copyright, or proprietary data limits competition. The proprietary data is:

X These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Title Date

Contracting Officer Signature Date

FISCPS 4200/180 (Rev. 10/1/10)