SOLE SOURCE-redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

8The service or material listed on (Document number) 2174-3519 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name. (If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) Manufacturer POC & Phone Nr. DANIEL TYCZ @ (800)371-7174 EX 440 // FAX: (860) 286-7878 Mfr. Address 66 DOUGLAS STREET BLOOMFIELD, CT 06002-3619 Manufacturers Dealer/Rep PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) Dealer/Rep Address/Phone Number DANIEL TYCZ @ (800)371-7174 EX 440 // DANIEL.TYCZ@PRATTANDWHITNEY.COM

_X Description of the item or service required, the estimated cost, and required delivery date.

Qty 1 each PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) MODEL #: U307745 (aka LABMASTER UNIVERSAL-LONG LENGTH (MODEL 1000A)). The model U307745 is listed in the NAVSEA OD 48939 Navy Calibration Equipment Publication (NCE) as a model U307745 Universal Measuring System. Cost: $107,980.00. RDD: 20 Sep 2022.

_X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

The PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) model U307745 (LABMASTER UNIVERSAL-LONG LENGTH (MODEL 1000A)) is utilized in multiple Navy Calibration Procedures for the calibration of a wide variety of measuring and dimensional test measurement and diagnostic equipment (TMDE). The model U307745 is listed as an authorized standard in the NAVSEA OD 48939 Navy Calibration Equipment Publication (NCE). IAW OPNAVINST 3960.16b para 6x, only equipment listed in the NCE can be used to perform calibrations. PRATT & WHITNEY MEASUREMENT SYSTEMS is the original equipment manufacturer (OEM) and the only authorized manufacturer for this model U307745 (LABMASTER

UNIVERSAL-LONG LENGTH (MODEL 1000A)).

_X The requested material or service represents the minimum requirements of the

Government This Primary Calibration Standard model U307745 aka LABMASTER UNIVERSAL-LONG LENGTH (MODEL 1000A)) supports calibration of various dimensional and measuring test instruments for PSNS (N4523A) and PSNS supported Fleet Activities and is the Primary NAVSEA 04 TMDE approved Calibration Standard for performing these calibrations.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_X The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

This item (PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) model U307745 (LABMASTER UNIVERSAL-LONG LENGTH (MODEL 1000A))) is designed to work specifically in conjunction with already owned measurement and dimensional calibration standards for the calibrations of various U.S. Navy owned dimensional and measurement equipment located locally and abroad. The model U307745 will become and will become part of the approved/existing PSNS and IMF (Shop 52 Calibration Lab KBS) Dimensional and Measurement Calibration Standards Equipment (a.k.a. form, fit and function). This calibration equipment is essential to keep the fleet afloat and personnel safe that support measuring and dimensional equipment located at PSNS and IMF, San Diego, Everett, and Japan locations. Calibrated Dimensional and Measurement Equipment is essential to the support of Naval Fleet Forces.

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are “direct replacements” parts/components for existing brand name equipment.

X Other information to support a sole-source buy:

The sole source is submitted to ensure that exact model and MFR are purchased without substitution due to item end use being a calibration standard. Actual source of procurement is not being limited, only model and manufacturer.

Note PRATT & WHITNEY MEASUREMENT SYSTEMS (Cage 3EQQ7) MODEL #:U307745 (LABMASTER UNIVERSAL-LONG LENGTH (MODEL 1000A)) is unavailable via Naval Stock System.

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE

JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN COMPETITION.

Activity: PSNS & IMF Shop 52/Code 136.3

SCHOOS.ANDERS

Metrology Plannerman Signature: ON.C.1161571888

Digitally signed by

SCHOOS.ANDERSON.C.1161571888

Date: 2022.06.23 09:59:19 -07'00'

Date:23 JUN 2022

Anderson Schoos

Contracting Officer Signature Date:

FISCPS 4200/180 (Rev. 10/1/10) mailto:DANIEL.TYCZ@PRATTANDWHITNEY.COM