SOLE SOURCE_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k)

Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document number)____1347-3036______ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: _Horn Machine Tools, Inc _______________________

Manufacturer POC & Phone Nr.___Lee Sanchez___1(559)431-4131_________

Mfr. Address___40455 Brickyard Drive Madera, Ca 93636 _____________

Manufacturers Dealer/Rep__ Lee Sanchez ________________________

Dealer/Rep Address/Phone Number_____SAME_________________________

_X_Description of the item or service required, the estimated cost, and required delivery date.

_Request to purchase 28 bending dies for S/56(PSNS) from Horn Machine Tools bending machine located in Building 73 at Naval Air Station North Island, San Diego. Bending Dies support piping repair and replacement at NASNI instead of shipping material back and forth to PSNS-

_NASNI.

_X_Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

__Horn Machine Tools is OEM supplier/manufacturer of Kit #211026 for the Model#CNC80TSRL

(922B)#161224 for our unique requirements. For personnel safety, it is critical that Horn

Machine Tools supplies the bending dies to ensure proper fitment with an established product line with a knowledgeable engineering staff. This is not a commodity product.

_ X The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

__The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

_ A patent, copyright, or proprietary data limits competition. The proprietary data is:

_X These are “direct replacements” parts/components for existing brand name equipment.

____Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT

TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT

THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Signature____ Activity__

Title___ Date___ ________________

Contracting Officer Signature________________________________ Date__________________

FISCPS 4200/180 (Rev. 10/1/10)