Sole Source Redacted 4192-1052-1053.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number)_______________ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ____________________________________________________________ Manufacturer POC & Phone Nr._____________________________________________ Mfr. Address_____________________________________________________________ Manufacturers Dealer/Rep_________________________________________________ Dealer/Rep Address/Phone Number__________________________________________

____The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

____The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

____A patent, copyright, or proprietary data limits competition. The proprietary data is:

for existing brand name equipment.

____Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature Date_ _________________

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018

East Side Saw

Michael J Lindsay 425-454-7627 12880 NE Bel-Red RD Ste-1 Bellevue, WA 98005-2695

206-235-1130 Michael J Lindsay

_X___Description of the item or service required, the estimated cost, and required delivery date. 2 EA Power hack saw blades- 7'2 x 3/4 tough tooth, RDD Oct 25,2024_______________

_X___Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

East Side Saw is the equipment manufacturer of the 7'2" power hack saw blade which is a purpose built saw blade for the u.s. navy. The saw blade is used with the E.H.Wach saw machine that was design to cut thick steel. The 7'2' power hack saw blade was design, drawings,specifications,plans working arrangement and other associated engineering and manufacturing information "whole or in part" is owned and controlled by E.H.wachs but allowed East side saw

X

X

This 7'2" power hack saw blade is exact match to the current E.H.Wach saw machine CCRPL currently uses to complete the job of installing service access in the deck and hulls on the navy's current and recycled fleet.

X

X to manufacture the power saw blade for the U.S. Navy.

E.H.Wachs protected intellectual property and patented technologies in which alloweds East side saw to manufacture the 7'2" power hack saw blade.

08/02/2024