SOLE SOURCE JUSTIFICATION-redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number) 2010-4625 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ATLAS COPCO Manufacturer POC & Phone Nr.Joe Rarick 346-267-6612 Mfr. Address 3301 Cross Creek Parkway, Auburn Hills, MI 48326, United States Manufacturers Dealer/Rep Joe Rarick Dealer/Rep Address/Phone Number 3301 Cross Creek Parkway, Auburn Hills, MI 48326, United States /346-267-6612 These are also available on GSA ADVANTAGE at $1470.00 each

X Description of the item or service required, the estimated cost, and required delivery date.

Quote attached: ATLAS COPCO 7” PNEUMATIC TURBINE GRINDER, MODEL GTG25 F085-727, $67,298.00

RDD-2/10/2022

GSA ADVANTAGE: ATLAS COPCO 7” PNEUMATIC TURBINE GRINDER, MODEL GTG25 F085-727, $73,500.00

RDD-2/10/2022

X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

ATLAS COPCO 7” PNEUMATIC TURBINE GRINDER, MODEL GTG25 F085-727, MFR. PART NO. 8423252507, 8500 RPM, 5/8-11 SPINDLE THREAD, 3.3HP MAX OUTPUT, ANGLE, WEIGHT 5.29LB, AUTO BALANCER, ERGONOMIC DESIGN, BUILT-IN SPLINDLE LOCK, SAFETY TRIGGER, OVERSPEED SHUT-OFF DEVICE, OIL FREE OPERATION, MINIMUM SOUND LEVELS, ADVANCED 2-STAGE TURBINE MOTOR, EASY HANDLING, WHEEL GUARD, THROTTLE LEVER, HIGH POWER TO WEIGHT RATIO, THIS HAS BEEN TESTED BY MECHANICS IN OUR

SHIPYARD

X The requested material or service represents the minimum requirements of the Government. ATLAS COPCO 7” PNEUMATIC TURBINE GRINDER, MODEL GTG25 F085-727

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are “direct replacements” parts/components for existing brand name equipment.

X Other information to support a sole-source buy:

THIS HAS BEEN TESTED BY MECHANICS IN OUR SHIPYARD FOR TOOL EVALUTION AND COMPARED TO OUR

OTHER TOOLS THEY USE.

FROM THE EVALUATION RESPONSE mechanics state compare to other models this tool is; LIGHT WEIGHT, VERY QUIET, POWERFUL,GREAT HANDLE DESIGN, EASE OF CONTROL SWITCH, EXCELLENT FOR OVERHEAD, HORIZONTAL, AND FLAT WORK, FITS IN TIGHT SPACES, WORKS FASTER AND BETTER, LOW

VIBRATION, EASE OF TOOL IS EXCELLENT.

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Title ToolRoom Mechanic Planner Shop 06 Date 1/03/2022

Signature MCCAMMON.DARCIE.J.1122 382903

Digitally signed by

MCCAMMON.DARCIE.J.1122382903

Date: 2022.01.10 12:50:24 -08'00'

Date 1/03/2022

Contracting Officer Signature Date_ DLA Maritime Puget Sound Justification for Sole Source 05/21/2018