SOLE SOURCE.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k)

Ref: FAR 13.106

The service or material listed on (Document number) 02123773 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Siegmund.

Manufacturer POC & Phone Nr.: Sales Department, 1-800-989-5244

Mfr. Address: 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 U.S.A

Manufacturers Dealer/Rep: Trick Tools

Dealer/Rep Address/Phone Number: 75 Truman RoadPella, IA 50219, 641-628-3860

_X_Description of the item or service required, the estimated cost, and required delivery date.

1ea. Siegmund System 28 XD7 Welding Table, 157 x 78 inch (S2-280055-XD7) - Options:

37.5 inch table height legs with casters, 1ea. Siegmund System 28 Fixturing Kit, 127 piece (S2-283500), _X_Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

Table top must be made out of hardened steel with a plasma nitride finish.

_X_The requested material or service represents the minimum requirements of the Government.

Borehole spacing 100 mm with additional 100 mm grid offset by 50 mm in the x and y axis. 3 mm radius of top table edge. 28.15 mm diameter bore holes with radius R3. load capacity of

10 metric tons minimum. Table height of 37.5 inches and must have casters. Size of table top needs to be 157”x78”

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_X_The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

Currently PSNS & IMF owns several of this type of welders table. Uniformity within the shipyard allows for sharing of resources and tooling to accomplish work in a timely manner without having to purchase duplicate parts.

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT

TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT

THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature/Date:

FISCPS 4200/180 (Rev. 10/1/10)