Sol_140G0224Q0199.pdf

140G0224Q0199

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

08/20/2024 0040664672

1 41

PO BOX 25046

204 DENVER FEDERAL CENTER

DENVER CO 80225-0046

USGS OAG DENVER ACQUISITION BRANCH

90 Days After Award

USGS National Wildlife Health Cente

6006 Schroeder Road

Madison

WI 53711

000 000-0000Janice Moye

09/04/2024 1700 ED

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

1) This Solicitation Notice is to announce the U.S. Department of Interior (DOI), U.S.

Geological Survey has a requirement for a Utility Vehicle and Accessories in accordance with the attached solicitation.

2) The solicitation number is 140G0224Q0199 and is being issued as a Request for Quote (RFQ).

3) The award for this requirement shall be made using the policies in the Federal Acquisition Regulations (FAR) Part 12 Acquisition of Commercial Items, and in conjunction with the policies and procedures for solicitation, evaluation, and award prescribed in FAR 13.5 Simplified Procedures for Certain Commercial Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 41

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0224Q0199

Items, as appropriate for this acquisition. Award will be made to the lowest priced, technically acceptable offeror. The quote with the lowest price will be reviewed first and if that quote is found to be technically unacceptable, the next lowest quote will be reviewed and etc. To be considered technically acceptable, offeror shall provide technical brochures or specifications, complete configuration to include quantity, part numbers, and descriptions, per line item as specified in this buy.

4) This solicitation is a SET ASIDE for Small

Businesses. The associated NAICS Code is 333120

Construction Machinery Manufacturing.

5) All requirements for preparation, submission, and receipt of quotes are contained in this solicitation and shall be adhered to.

6) All questions and quote must be emailed to the

Contracting Specialist, Janice Moye at jmoye@usgs.gov.

00010 Brand Name Bobcat UW56 or equal 1 EA

Product/Service Code: 2510

Product/Service Description: VEHICULAR CAB, BODY, AND FRAME STRUCTURAL COMPONENTS

Delivery: 90 Days After Award

00020 Snow Blower 32X60 1 EA

Product/Service Code: 3825

Product/Service Description: ROAD CLEARING, CLEANING, AND MARKING EQUIPMENT

Delivery: 90 Days After Award

00030 High Flow Hydraulic Package 1 EA

Attachment Control

Rear View Camera

Traction Control

29 x 10.5 Trac Tire

4K Heavy Duty Pallet Fork Frame

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 41

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0224Q0199

48" 4K Heavy Duty Pallet Fork Teeth

Strobe Light

Product/Service Code: 3805

Product/Service Description: EARTH MOVING AND

EXCAVATING EQUIPMENT

Delivery: 90 Days After Award

00040 Power Bob-Tach 1 EA

68" Standard Duty Bucket

Motor Package 130CC (22-28gpm)

Product/Service Code: 3805

Product/Service Description: EARTH MOVING AND

EXCAVATING EQUIPMENT

Delivery: 90 Days After Award

00050 68" Angle Broom 1 EA

Product/Service Code: 3750

Product/Service Description: GARDENING IMPLEMENTS

AND TOOLS

Delivery: 90 Days After Award

00060 66" Brushcat (High Flow) 1 EA

Product/Service Code: 3825

Product/Service Description: ROAD CLEARING, CLEANING, AND MARKING EQUIPMENT

Delivery: 90 Days After Award

00070 Dealer Pre-Delivery

Inspection/Destination/Assembly Charges

Product/Service Code: R499

Product/Service Description: SUPPORT-

PROFESSIONAL: OTHER

Delivery: 90 Days After Award

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

CONTINUATION SHEET REFERENCE NO. DOCUMENT BEING CONTINUED

RFQ 140G0224Q0199

PAGE OF PAGES

CONTENTS

Salient Characteristics

Federal Information Security Modernization (FISMA)

ICT Accessibility Requirements Statement per the Revised Section 508 of the Rehabilitation Act

Clauses

52.252-2 CLAUSES INCORPORATED BY REFERENCE. (FEB 1998)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS-COMMERCIAL ITEMS (MAY2024)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES. (NOV 2020)

GS0919 LEGAL HOLIDAY (JUN 2021)

GS 1131Unilateral DEOBLIGATION OF UNEXPENDED FUNDS (MAY 2013)

DOI-AAAP-0028 - Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (April 2013)

DOI-AAAP-0055 Procuring INTERNET PROTOCOL VERSION 6 (JUN 2016)

Provisions

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

52.204-26 Covered Telecommunications Equipment or Services-Representation (Oct 2020)

52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures (Dec 2023)

52.211-6 -- BRAND NAME OR EQUAL (AUG 1999)

52.212-3 Offeror Representations and Certifications – Commercial Items (SEP 2023)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE. (FEB 1998)

BASIS FOR AWARD

PAGE OF PAGES

SALIENT CHARACTERISTICS

Utility Vehicle Standard Specifications Brand Name or equal to Bobcat Toolcat UW56 (M1225)

1. GENERAL INFORMATION

A. Introduction Provide commercial utility vehicle with enclosed cab and standard bucket, attachable angle broom, pallet fork and teeth, rotary cutter, and snow blower attachments for the National Wildlife Health Center (NWHC).

B. Background: NWHC requires vendor to furnish for the NWHC facility the following items, meet or exceed, to the following:

I. Commercial utility vehicle with enclosed cab and standard bucket, attachable angle broom, pallet fork and teeth, rotary cutter, and snow blower.

II. All installation materials and work complete, including testing and verification of proper installation and operability according to manufacturer’s recommendations and guidelines. Warranty of products for two years from the date of installation.

2. WORK REQUIREMENTS

A. Request for Quotation (RFQ) package:

I. Equipment cutsheets detailing dimensions, mechanical and electrical capacities, performance characteristics, and standard warranty information.

B. Technical Specifications I. Utility Vehicle Standard Specifications Brand Name or equal to Bobcat Toolcat UW56

(M1225) A. Liquid-cooled Tier 4 diesel engine B. Adjustable Vinyl Seats C. All-Wheel Steer D. Automatically Activated Glow Plugs E. Auxiliary Hydraulics F. Bob-Tach G. Boom Float H. Cargo Box Support I. Cruise Control J. Speed Management K. Enclosed Cab with HVAC L. Engine and Hydraulic Monitor with Shutdown M. Front LED Work Lights N. Full-time 4WD O. Roll Over Protective Structure (ROPS) P. Dome Light Q. Hydraulic Dump Box R. Radiator Screen S. Rear Receiver Hitch T. Spark Arrestor Muffler U. Instrumentation: Standard 5” Display with Keyless Start, Engine Temperature and Fuel

Gauges, Hour meter, RPM and Warning Indicators. Includes maintenance interval notification, fault diplay, jb codes, quick start, and security lockouts.

II. Utility Vehicle Options

PAGE OF PAGES

A. High Flow Hydraulic Package Brand Name or equal to Bobcat Toolcat UW56 (M1225-R03- C02)

B. Power Bob-Tach (Bobcat Toolcat UW56 (M1225-R14-C03) or equal) C. Attachment Control (Bobcat Toolcat UW56 (M1225-R08-C02) or equal) D. Rear View Camera (Bobcat Toolcat UW56 (M1225-R20-C01) or equal) E. Traction Control (Bobcat Toolcat UW56 (M1225-R16-C02) or equal) F. 29 X 10.5 Trac Tire (Bobcat Toolcat UW56 (M1225-R05-C04) or equal) G. Strobe Light (Bobcat Toolcat UW56 (7424783) or equal)

III. Angle Broom Attachment Brand Name or equal to Bobcat Toolcat UW56 (7337703) A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed.

C. Sweep Width minimum 60” D. Hydraulic Broom Angling E. In cab controls including on/off

IV. 4K Heavy Duty Pallet Fork Frame Attachment Brand Name or equal to Bobcat Toolcat

UW56 (7294305)

A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed.

V. 48” 4K Heavy Duty Pallet Fork Teeth Attachment Brand Name or equal to Bobcat Toolcat

UW56 (6540182)

A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed.

VI. Snow Blower 32X60 Attachment Brand Name or equal to Bobcat Toolcat UW56 (M7046) A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed

VII. Snow Blower Motor Package Attachment Brand Name or equal to Bobcat Toolcat UW56 (M7046-R01-C03)

A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed

VIII. 66” High Flow Rotary Cutter Attachment Brand Name or equal to Bobcat Toolcat UW56 (7233014)

A. Factory option add-on assembly supplied by utility vehicle manufacturer.

B. No third party equipment manufacturers allowed C. Cutting Height 3”

C. Project Completion:

I. Final Inspection and Acceptance Criteria

A. Installation of all required equipment to take place at vendors facility. Vendor is responsible for all costs associated with delivery of equipment to the NWHC site under this Contract.

B. Equipment will be delivered to the NWHC site complete with the standard duty bucket attachment installed and ready for immediate operation at the NWHC facility.

C. Vendor shall demonstrate and verify proper operation of installed equipment to NWHC facility staff prior to acceptance.

PAGE OF PAGES

D. Any defects discovered will be corrected, with defective parts replaced at Vendor’s expense, prior to acceptance.

E. Equipment cut sheets with narrative descriptions for care and maintenance recommendations of equipment will be furnished upon delivery of equipment.

F. Acceptance by the Government will be given only after the satisfactory completion of the installation of the system, receipt of product care operation and maintenance paperwork, instruction in operation of equipment to facility maintenance staff, requirements within the

SOW.

G. Project acceptance can be issued only by the project Contracting Officer (CO).

II. Warranty Work and Service A. Warranty paperwork to be submitted by the Vendor complete to the Manufacturer.

Warranty verification by Vendor/Manufacturer to be received by NWHC Facility Operations Specialist (FOS) within 60 days of installation.

B. The Contractor shall guarantee that all installed parts; components, systems, labor and workmanship meet the specifications set forth in this SOW. Additionally, the Contractor shall warranty all Contractor supplied components, labor, workmanship and/or systems for a (minimum) period of 24 months from the date of Government acceptance.

C. Should any Contractor supplied part, component, workmanship or system, fail within that period of time, the Contractor shall immediately replace or repair that part, component, or system within 72 hours at no further cost to the Government. If the Contractor is unable to start and/or finish the repair or replacement, the Contractor shall be liable for all costs incurred by the Government to correct the issue(s).

D. The Contractor shall not be responsible for the repair or replacement of any part, component, or system that fails due to fire, flood, riots and vandalism or because of the misuse of equipment by Government employees.

D. Deliverables I. Installation and system setup to be complete within 90 days of contract award.

3. SUPPORTING INFORMATION

A. Place of Performance:

USGS-UMESC

2630 Fanta Reed Road La Crosse, WI 54603

B. Period of Performance: Aug 31, 2024 – Oct 31, 2024.

C. Government Furnished Property (GFP): None

PAGE OF PAGES

FEDERAL INFORMATION SECURITY MODERNIZATION (FISMA)

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle 1 N/A Background Investigations. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

2 N/A

Contractor will have access to Privacy Act System of Records - Work under this contract will involve design, development or operation of (access to) system(s) of records containing personal information protected by the Privacy Act (5 U.S.C. Section 552a).

Non-disclosure Agreement. Prior to receiving access to USGS computers, contractor employees shall be required to sign nondisclosure or other system security agreements, depending on the systems to be used and level of access granted.

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services Privacy Act System: [Identify covered system(s) to which the contractor may have access]

Work to be performed: [Summarize nature of the contractor's use of such records, such as]

• User-level access to system containing protected records

• Operation or maintenance of Privacy Act System of records or computers hosting such system

• Design or modification of a Privacy Act system of records] The contractor is not required or permitted to respond to requests for Privacy Act data or to make decisions about releases of data under the Act. Contractor shall ensure its employees are instructed to safeguard against improper use or release of such data and advise them that violation of the Act may involve criminal penalties. The contractor will comply with FAR clause 52.224-2, Privacy Act, incorporated herein by reference and with DOI Privacy Act regulations at 43 CFR 2, Subpart D

3 N/A Training. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - Contractor employees must successfully complete DOI’s end-user computer security awareness training prior to being granted access to DOI data or being issued a user account. Training must be renewed annually. Additionally, the contract employees must sign a Statement of Responsibility (SOR) that states they have read the appropriate Rules of Behavior and other applicable Information security policies.

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle

4 N/A Personnel Changes. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - The contractor must notify the COR immediately when an employee working on a DOI system is reassigned or leaves the contractor’s employ.

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications *

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services *

*May not be applicable for off-site performance.

5 N/A Contractor Location. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

Applies whenever any contractor employee has unsupervised access to a USGS system (even if only basic network, internet or email or will develop custom applications) such as:

• User Access to USGS IT Systems known to contain sensitive or proprietary data

• IT Support services (greater than user access)

• Development or Maintenance of Custom Applications

• On-site contractor support and management of IT system

• Off-site contractor Oversight and Management of IT System

• IT Security Services

No portion of the services to be performed hereunder may be performed outside the United States without the express written permission of the Contracting Officer.

If services are proposed to be performed abroad, the Contractor shall provide an acceptable security plan that addresses mitigation of problems related to communication, control, and protecting the

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle confidentiality, integrity, and availability of IT systems and information.

A Security Plan Template is available upon request from the Contracting Officer.

6 N/A N/A Applicable Standards. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” - Contractor must follow the DOI System Development Life Cycle (SDLC), NIST SP 800-64 and the DOI SDLC Security Integration Guide.

7 N/A Asset Valuation-Security Categorization: The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

User Access to USGS IT Systems – The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

IT Support Services greater than User- Level Services Choose one:

The Government is responsible for security categorization on USGS systems to which the Contractor may have access under this contract.

- The Government has defined the [insert name of system to be developed, operated or maintained by the contractor] to be a [Major Application], [Minor Application] or [General support system] as defined in OMB Circular A-130, Appendix III and NIST SP800-53. The following risk and sensitivity levels have been assigned based on the FIPS 199 and the NIST SP 800-60.

Mission impact:

Data sensitivity:

Risk level:

Bureau/departmental/national criticality:

Off-Site Oversight and Management of IT System- The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public https://insight.usgs.gov/aei/offices/oa/oag/AOP/guidefordevelopingsecurityplans.pdf

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle facilities, such as a website or office, where it may be accessed.

IT Security Services - Applies only if the purpose of the contract includes obtaining asset valuation services.

The Contractor shall use the FIPS 199 and the NIST SP 800- 60 to determine information types and security categorization based on mission impact, data sensitivity, risk level, and bureau / departmental / national criticality for Contractor-owned and operated systems used to provide services under this contract. Solicitations must include either the complete publication or a reference to public facilities, such as a website or office, where it may be accessed.

The Government shall be granted unlimited rights in software or data produced hereunder as described in FAR clause 52.227-17, Rights in Data—Special Works, incorporated by reference herein.

Select either COTS or custom software language as applicable. If both apply, identify software/data deliverables governed by each clause.

Property Rights.

1. For Federal Supply Schedule orders or orders under an existing contract, rights to software acquired hereunder are set forth in the basic contract.

2. For open market contracts, the Government's rights in software delivered hereunder shall be as described in software developer's commercial software license agreement or the clause FAR 52.227-19, Commercial Computer Software-Restricted Rights, whichever is greater.

9 N/A Independent Verification and Validation (IV&V). The Government is responsible for independent software verification and validation prior to being moved into production.

On-Site Contractor Support and Management of IT System Choose one:

Software will be independently verified and validated by the Government or another selected contractor prior to being moved into production.

Contractor will ensure that independent verification and validation is performed on software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

Off-Site Contractor Operation and Management of IT System-Contractor will ensure that independent verification and validation is performed on

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle software deployed on contractor managed systems containing USGS data, in accordance with DOI SDLC Security Integration Guide

IT Security Service - Applies only if the purpose of the contract includes obtaining IV&V services.

10 N/A Applies if the purpose of the contract includes obtaining C&A services.

Certification & Accreditation.

User Access to USGS IT Systems or IT Supports Services (Greater than User Access Certification and Accreditation on USGS systems to which the Contractor may have access under this contract will be conducted by the Government or another of its contractors.

Development or Maintenance of Custom Applications The contractor will perform Certification and Accreditation (C&A) services on the application developed or maintained hereunder prior to going into production. The application must be re-accredited every three years or whenever there is a major change that affects security.

C&A documents will be provided to the COR in both hard copy and electronic forms. The contractor must follow NIST SP 800-37, 800- 18, 800-30, 800-60, 800-53A, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/ FIPS documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents by contacting the Contracting Officer. The government reserves the right to conduct the ST&E using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

On-Site Contractor Support and Management of IT System or Off-Site Contractor Operation and Management of IT System The Contractor must maintain systems that are compliant with NIST SP 800-18, 800-30, 800-37, 800-53A, 800-60, Federal Information Processing Standard (FIPS) 199 and 200, the associated DOI guides/templates, the DOI Security Test & Evaluation (ST&E) Guide, and the DOI Privacy Impact Assessment. As required by the above, Major Applications and General Support Systems shall be certified and accredited (C&A) prior to going into production and re-accredited every three years or whenever there is a major change that

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle affects security. C&A documents will be provided to the COR in both hard copy and electronic forms. NIST documents are available on the internet at http://csrc.nist.gov/publications/nistpubs/. The contractor may request copies of DOI documents by contacting the Contracting Officer. The government will reserve the right to conduct the ST&E, using either Government personnel or an independent contractor. The contractor will take immediate and timely action to correct or mitigate any weaknesses discovered as necessary to bring the application or system into compliance with the above requirement.

11 N/A for

COTS HW &

SW, User Access to

USGS IT

Systems (other than IT services), IT Support Services (User Level or greater access)

N/A Internet Logon Banner. The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology.”

Development or Maintenance of Custom Applications OR On-Site Contractor Support and Management of IT System OR Off-site Contractor Oversight and Management of IT System- Web-based applications developed or maintained under this contract must contain a USGS approved logon banner:

https://portal.doi.net/CIO/ITPMgmt/Documents/IT Standards/IT Security/DOI Security Control Standards (based on NIST SP 800-53 Revision 3)/Access Control v1.4.pdf

12 N/A Incident Reporting. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must report computer security incidents affecting DOI data or systems in accordance with the DOI Computer Incident Response Guide.

13 Quality Control. All software or hardware purchased must be free of malicious code such as viruses, Trojan horse programs, worms, spyware, etc. Validation of this must be written into the contract.

https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf https://portal.doi.net/CIO/ITPMgmt/Documents/IT%20Standards/IT%20Security/DOI%20Security%20Control%20Standards%20(based%20on%20NIST%20SP%20800-53%20Revision%203)/Access%20Control%20v1.4.pdf

PAGE OF PAGES

COTS

Hardware or Software

Development or Maintenance of Custom Applications

Outsourced IT Services or On-site Support

Requirements herein are incorporated as part the Statement of Work/ Performance Work Statement:

Utility Vehicle 14 N/A N/A Self-Assessment. The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” - The contractor must conduct an annual self-assessment in accordance with annual DOI guidance on all information systems in production.

15 N/A Vulnerability Analysis. Vulnerability Analysis on USGS systems to which the Contractor may have access under this contract will be conducted by the Government or another of its contractors.

16 N/A Logon Banner. Contractor employees who access DOI information systems must acknowledge a government-approved legal warning banner prior to logging on to the system. This includes contractor owned information systems hosting DOI data.

17 N/A Security Controls.

The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology” – The Contractor shall ensure compliance with the security control requirements of the current version of NIST SP 800- 53, Rev.1, which are applicable to the security categorization of the data or system. FIPS 199 and the NIST SP 800-60 will be used to determine information types and security categorizations.

18 N/A N/A Contingency Plan.

The Contractor shall perform in accordance with contract clause “Security Requirements: Facility Access and Information Technology.”

For IT Support Services: The Contractor shall submit a contingency plan in accordance with NIST SP 800-34 and DOI IT Systems Contingency Plan Guide.

ICT ACCESSIBILITY REQUIREMENTS STATEMENT PER THE REVISED SECTION 508 OF THE

REHABILITATION ACT

Project Planning

PAGE OF PAGES

Utility Vehicle

E206.1 General. Where components of ICT are hardware and transmit information or have a user interface, such components shall conform to the requirements in Chapter 4.

E302 Functional Performance Criteria

302.1 Without Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision.

302.2 With Limited Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited vision.

302.3 Without Perception of Color. Where a visual mode of operation is provided, ICT shall provide at least one visual mode of operation that does not require user perception of color.

302.4 Without Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing.

302.5 With Limited Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing.

302.6 Without Speech. Where speech is used for input, control, or operation, ICT shall provide at least one mode of operation that does not require user speech.

302.7 With Limited Manipulation. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or simultaneous manual operations.

302.8 With Limited Reach and Strength. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength.

302.9 With Limited Language, Cognitive, and Learning Abilities. ICT shall provide features making its use by individuals with limited cognitive, language, and learning abilities simpler and easier.

CLAUSES

52.252-2 CLAUSES INCORPORATED BY REFERENCE. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov

52.202-1 Definitions (JUN 2020) 52.204-7 System for Award Management. (OCT 2018)

52.204-13 System for Award Management Maintenance. (OCT 2018)

52.204-18 Commercial and Government Entity Code Maintenance. (AUG 2020)

52.204-19 Incorporation by Reference of Representations and Certifications. (DEC 2014)

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation. (NOV 2015)

52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023)

52.232-39 Unenforceability of Unauthorized Obligations. (JUN 2013) http://www.acquisition.gov/

PAGE OF PAGES

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. (MAR 2023)

(End of clause)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS-COMMERCIAL ITEMS (MAY2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services::

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X_ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111- 117, section 743 of Div. C).

X (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L.

117-328).

__ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115–390, title II).

X (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) (Pub. L. 115– 390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204–30.

X (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

__ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (17) [Reserved] X (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6

PAGE OF PAGES

__ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (20) 52.219-8, Utilization of Small Business Concerns (Feb 2024) (15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Sep 2023) of 52.219-9.

__ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

__ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

X (26) (i) 52.219-28, Post Award Small Business Program Representation (Feb 2024) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

X_ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)).

X (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

X (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2024).

X (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

X (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

__ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

X (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

X_ (46) 52.223-23, Sustainable Products and Services (May 2024) ( E.O. 14057, 7 U.S.C. 8102, 42 U.S.C.

6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

X_ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

X_ (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C.

2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/52.223-12#FAR_52_223_12 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/52.223-20#FAR_52_223_20 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/52.223-21#FAR_52_223_21 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/52.223-23#FAR_52_223_23 https://www.federalregister.gov/executive-order/14057 https://www.govinfo.gov/link/uscode/7/8102 https://www.govinfo.gov/link/uscode/42/6962 https://www.govinfo.gov/link/uscode/42/6962 https://www.govinfo.gov/link/uscode/42/8259b https://www.govinfo.gov/link/uscode/42/7671l https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.govinfo.gov/link/uscode/19/3301 https://www.govinfo.gov/link/uscode/19/2112 https://www.govinfo.gov/link/uscode/19/2112 https://www.govinfo.gov/link/uscode/19/3805 https://www.govinfo.gov/link/uscode/19/4001

PAGE OF PAGES

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Dec 2022) of 52.225-3.

__ (iv) Alternate III (Feb 2024) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ( 42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) ( 42 U.S.C. 5150).

(55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) ( E.O. 13513).

__ (56) 52.229-12, Tax on Certain Foreign Procurements…