Sol_140G0221Q0068.pdf

140G0221Q0068

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

06/29/2021 0040524593

1 52

PO BOX 25046

204 DENVER FEDERAL CENTER

DENVER CO 80225-0046

USGS OAG DENVER ACQUISITION BRANCH

Multiple

USGS CR National Ice Core Lab

Bldg 810 MS975

Denver

CO 80225

303 236-9322Cheryl Peterson

08/24/2021 1700 MS

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

The award of this requirement shall be made using the policies in the Federal Acquisition Regulations (FAR) Part 12, Acquisition of Commercial Items and in conjunction with the policies and procedures for solicitation, evaluation and award prescribed in FAR Part 13.5 Simplified Procedures for Certain Commercial Items, as appropriate for this acquisition.

Award shall be made to the vendor whose quotation, confirming to this RFQ is determined to be the most advantageous to the government.

Period of Performance: 12/01/2021 to 11/30/2026

00010 Base Year. As needed repairs.

Please reference attached contract price Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068 schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Delivery: 11/30/2022

Period of Performance: 12/01/2021 to 11/30/2022

00020 Base Year. Parts.

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Delivery: 05/31/2022

Period of Performance: 12/01/2021 to 11/30/2022

00030 Base Year. Preventative Maintenance.

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Delivery: 05/31/2022

Period of Performance: 12/01/2021 to 11/30/2022

00040 Base Year. Onsite after hours emergency response.

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

3 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

Statement of Work and Terms and Conditions.

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Delivery: 05/31/2022

Period of Performance: 12/01/2021 to 11/30/2022

00050 Base Year. Trip charges.

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Delivery: 05/31/2022

Period of Performance: 12/01/2021 to 11/30/2022

00060 1st Option Year. As needed Repairs

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

(Option Line Item)

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2022 to 11/30/2023

00070 1st Option Year. Parts

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

(Option Line Item)

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

4 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

Period of Performance: 12/01/2022 to 11/30/2023

00080 1st Option Year. Preventative Maintenance

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2022 to 11/30/2023

00090 1st Option Year. On-site after hours emergency

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2022 to 11/30/2023

00100 1st Option Year. Trip Charges

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2022 to 11/30/2023

00110 2nd Option Year. As Needed Repairs

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

5 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2023 to 11/30/2024

00120 2nd Option Year. Parts

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2023 to 11/30/2024

00130 2nd Option Year. Preventative Maintenance

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00140 2nd Option Year. Onsite after hours emergency response

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2023 to 11/30/2024

00150 2nd Option Year. Trip Charges

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

6 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2023 to 11/30/2024

00160 3rd Option Year. As needed repairs

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00170 3rd Option Year. Parts

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00180 3rd Option Year. Preventative maintenance

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00190 3rd Option Year. Onsite after hours emergency response

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

7 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00200 3rd Option Year. Trip Charges

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2024 to 11/30/2025

00210 4th Option Year. As needed repairs

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2025 to 11/30/2026

00220 4th Option Year. Parts

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2025 to 11/30/2026

00230 4th Option Year. Preventative maintenance

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

8 52

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140G0221Q0068

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2025 to 11/30/2026

00240 4th Option Year. Onsite after hours emergency response

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2025 to 11/30/2026

00250 4th Option Year. Trip Charge

Please reference attached contract price schedule. Services, non-personal, to provide all plant, equipment, labor and materials (unless otherwise provided herein) as indicated in the

Statement of Work and Terms and Conditions.

Anticipated Award Type: Firm-fixed-price

Product/Service Code: J041

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- REFRIGERATION, AIR CONDITIONING,

AND AIR CIRCULATING EQUIPMENT

Period of Performance: 12/01/2025 to 11/30/2026

TABLE OF CONTENTS

Request for Quotation

STATEMENT OF WORK

Clauses by Reference

Clauses by Full Text

Department of Interior Clauses

United States Geological Survey (USGS) Clauses

Provisions by Reference

Provisions by Full Text

REQUEST FOR QUOTATION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

1. Description of Requirements:

The contractor shall provide all necessary labor, supplies, materials, equipment and supervision for the Department of Interior, United States Geological Survey for refrigeration system maintenance.

This is in accordance with the attached statement of work.

2. Solicitation Number: 140G0221Q0068

3. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-06 effective June 10, 2021

4. This is a competitive, unrestricted acquisition

5. The contract line item number(s) and items, quantities and units of measure are as follows. Provide a price for each line for each period of performance. For quote preparation, use the “not-to-exceed” amounts for the units of measure (hours, trips or parts) listed on the tables below:

Base Year

Item Contract Line Item

(CLIN)

CLIN

Type

Unit of Measure

Period of Performance

FIRM FIXED

Price or

CEILING

Price as indicated by

CLIN

Qty Extended Price

As needed repairs, normal business hours Not to exceed:

84 hours

0010 T&M Hour 12-01-2021 – 11-30-2022 per hour std

84 $

Parts Not to Exceed $18,493

0020 T&M Each 12-01-2021 – 11-30-2022

Preventative Maintenance Services

0030 FFP Month 12-01-2021 – 11-30-2022

$ _____ per month

12 $

Onsite after-hours/emergency response & repairs hourly rate

Not to exceed:

10 hrs standard 10 hrs OT 5 hrs holiday

0040 T&M Hour 12-01-2021 – 11-30-2022

$ ____ per hour std (business hours) $ ____ per hour OT $ ____ per hour holiday

Trip Charge per trip

All travel shall be handled in accordance with Federal Travel Regulations

(For “as needed repairs” AND “onsite after-hours emergency response”)

Not to exceed:

20 trips

0050 T&M Trip 12-01-2021 – 11-30-2022 per trip

20 $

1st Option Year Item Contract

Line Item

(CLIN)

CLIN

Type

Units of Measure

Period of Performance

FIRM FIXED

Price or

CEILING

Price as indicated by CLIN

Qty Extended Price

As needed repairs, normal business hours Not to exceed:

84 hours

0060 T&M Hour 12-01-2022 – 11-30-2023 per hour std

84 $

Parts Not to Exceed:

$ 19,048.00

0070 T&M Each 12-01-2022 – 11-30-2023

Preventative Maintenance Services

0080 FFP Month 12-01-2022 – 11-30-2023

$ _____ per month

12 $

Onsite after-hours emergency response & repairs hourly rate Not to exceed:

10 hrs std 12 hrs overtime 5 hrs holiday

0090 T&M Hour 12-01-2022 – 11-30-2023

$ ____ per hour std (business hours) $ ____ per hour OT $ ____ per hour holiday

Trip Charge per trip

All travel shall be handled in accordance with Federal Travel Regulations (For “as needed repairs” AND “onsite after-hours emergency response”) Not to exceed:

20 trips

0100 T&M Trip 12-01-2022 – 11-30-2023

2nd Option Year Item Contract

Line Item

(CLIN)

CLIN

Type

Units of Measure

Period of Performance

FIRM

FIXED Price or CEILING Price as indicated by CLIN

Qty Extended Price

As needed repairs, normal business hours Not to exceed:

84 hours

0110 T&M Hour 12-01-2023 – 11-30-2024 per hour std

84 $

Parts Not to exceed $19,620.00

0120 T&M Each 12-01-2023 – 11-30-2024

Preventative Maintenance Services

0130 FFP Month 12-01-2023 – 11-30-2024 per month

12 $

Onsite after-hours emergency response & repairs hourly rate Not to exceed $4,786.00 Not to exceed:

10 hrs std 12 hrs overtime 5 hrs holiday

0140 T&M Hour 12-01-2023 – 11-30-2024

$ ____ per hour std (business hours) $ ____ per hour OT $ ____ per hour holiday

Trip Charge per trip

All travel shall be handled in accordance with Federal Travel Regulations (For “as needed repairs” AND “onsite after-hours emergency response”) Not to exceed:

20 trips

0150 T&M Trip 12-01-2023 – 11-30-2024

3rd Option Year Item Contract

Line Item

(CLIN)

CLIN

Type

Units of Measure

Period of Performance

FIRM

FIXED

Price or

CEILING

Price as indicated by CLIN

Qty Extended Price

As needed repairs, normal business hours Not to exceed:

84 hours

0160 T&M Hour 12-01-2024 – 11-30-2025 per hour std

84 $

Parts Not to exceed $20,209.00

0170 T&M Each 12-01-2024 – 11-30-2025

Preventative Maintenance Services

0180 FFP Month 12-01-2024 – 11-30-2025 per month

12 $

Onsite after-hours emergency response & repairs hourly rate Not to exceed:

10 hrs std 12 hrs overtime 5 hrs holiday

0190 T&M Hour 12-01-2024 – 11-30-2025

$ ____ per hour std (business hours) $ ____ per hour OT $ ____ per hour holiday

Trip Charge per trip

All travel shall be handled in accordance with Federal Travel Regulations (For “as needed repairs” AND “onsite after-hours emergency response”) Not to exceed:

20 trips

0200 T&M Trip 12-01-2024 – 11-30-2025

4th Option Year Item Contract

Line Item

(CLIN)

CLIN

Type

Units of Measure

Period of Performance

FIRM

FIXED

Price or

CEILING

Price as indicated by CLIN

Qty Extended Price

As needed repairs, normal business hours Not to exceed:

84 hours

0210 T&M Hour 12-01-2025 – 11-30-2026 per hour std

84 $

Parts Not to Exceed $20,816.00

0220 T&M Each 12-01-2025 – 11-30-2026

Preventative Maintenance Services

0230 FFP Month 12-01-2025 – 11-30-2026 per month

12 $

Onsite after-hours emergency response & repairs hourly rate Not to exceed:

10 hrs std 12 hrs overtime 5 hrs holiday

0240 T&M Hour 12-01-2025 – 11-30-2026

$ ____ per hour std (business hours) $ ____ per hour OT $ ____ per hour holiday

Trip Charge per trip All travel shall be handled in accordance with Federal Travel Regulations (For “as needed repairs” AND “onsite after-hours emergency response”) Not to exceed:

20 trips

0250 T&M Trip 12-01-2025 – 11-30-2026

6. Provide resumes of the refrigeration technicians and teletrol technician in accordance with section H of the statement of work (SOW), Attachment 2 Labor Category Definitions and Attachment 3 Personnel Qualifications

7. Past performance – Provide the contract number, POC name, phone and e-mail address of a similar contract

8. Provide the Licensing by the State of Colorado in accordance with section H of the SOW

The evaluation criteria is Best Value Technical Trade-off. The technical proposal and past performance when combined are more important than price. Technical factors include the following:

Evaluation Factor I: Key Personnel. Demonstrated experience of key personnel to perform work of similar scope, magnitude, and complexity and to meet minimum contractor qualifications as described in the solicitation. The government shall review resumes of the refrigeration technicians and teletrol technician provided by the offeror in accordance with section H of the statement of work (SOW), Attachment 2 Labor Category Definitions and Attachment 3 Personnel Qualifications

Evaluation Factor II: Licensing. Offer shall provide proof of licensing by the State of Colorado in accordance with section H of the statement of work

Evaluation Factor III: Past Performance. The government shall review past performance history managing service contract(s) of a similar size and scope.

Evaluation Factor IV: Price. The government shall evaluate the price for reasonableness and completeness

6. Provide your DUNS number, cage code and verification SAM registration is current

DUNS Number Cage Code Verify SAM Registration is current – Yes or no

7. Date and place of delivery and acceptance and FOB Destination:

Period of Performance 12-1-2021 – 11-30-2026 Delivery Address Building 810, Entry S-22

1 Denver Federal Center Denver, CO 80225

8. The quotes are due as follows:

Date Aug 24, 2021 Time 5:00 p.m. (mountain time) Location crpeterson@usgs.gov

9. USGS Point of Contact: crpeterson@usgs.gov mailto:crpeterson@usgs.gov

STATEMENT OF WORK

A. INTRODUCTION:

The U.S. Geological Survey (USGS), NSF Ice Core Facility (NSF-ICF) has a requirement for on-going maintenance services for the NSF-ICF freezer building and refrigeration systems, 24-7 on-call emergency repair, periodic rebuilds of Mycom refrigeration reciprocating compressors (4K and 8K), and quarterly refrigeration control computer inspection and maintenance.

B. BACKGROUND:

The NSF-ICF, built in 1992, is a specialized facility in Lakewood, CO, which stores about 20,000 meters of ice cores that have been drilled from the world’s ice-covered regions for scientific investigation of the Earth’s past climate and atmosphere. To date, the cost of acquiring the samples stored in the NSF-ICF is approximately $350M; however, due to lack of accessibility to collection sites and environmental changes, recollection of many of the unique samples would be impossible. The ice core samples must be stored at temperatures well below freezing, within narrow ranges of temperature variation. It is not enough that the cores be prevented from melting. If the stored samples warm to approach the freezing point, components of the old air and other trapped substances may migrate out of the ice, misleading researchers analyzing the ice and rendering the samples useless. If the temperatures vary too much, even within a range of subfreezing temperatures, the ice can undergo disastrous structural and chemical changes.

The NSF-ICF freezer facility consists of three rooms of different sizes, each held at a different temperature. The refrigeration system is controlled by a Teletrol refrigeration control computer. The system uses R-22 refrigerant fluid and consists of four 4-cylinder Mycom (4K) reciprocating compressors;

two 8-cylinder Mycom (8K) reciprocating compressors; two evaporative condenser towers; four evaporator coils operating at -38o C (-36 o F); two evaporator coils operating as a single evaporator operating at -24 o C (-11 o F); and two evaporator coils operating as a single evaporator operating at approximately +4 o C (+39 o F).

The -24°C room uses one 4k compressor with an online backup to maintain temperature. The -38°C room utilizes a two-stage system consisting of one 4K high stage and one 8K booster compressor; each compressor has an online backup. The +4°C dock area is cooled using the -38°C room high stage 4K compressor.

This statement of work (SOW) for the NSF-ICF refrigeration maintenance contract describes the requirements for regularly-scheduled maintenance and repairs of the overall NSF-ICF refrigeration system, compressors, evaporative condenser units, evaporators in freezer, clean room fans, control computer, and freezer building and its ancillary parts. This SOW also describes as needed repairs for services not considered preventive maintenance services, as well as emergency response and repair for refrigeration or control computer system failures, 24 hours a day, 7 days a week, including holidays.

C. SCOPE

Due to USGS’s contractual obligations to operate and maintain the NSF-ICF for the National Science Foundation, the NSF-ICF refrigeration system is required to be operational at all times, serviced and repaired by qualified technicians trained specifically on these types of refrigeration systems, with the ability to procure the parts for necessary repairs. In many instances it is critical that the refrigeration equipment be repaired as soon as possible after a failure.

The Contractor shall provide replacement parts necessary to conduct repairs.

Invoices shall be submitted by the Contractor monthly in arrears. Repair or replacement parts, billable supplies, trip charges, and labor shall be invoiced separately. Parts and supplies shall be identified, and their acquisition shall be approved by the on-site NSF-ICF Technical Director or Curator prior to procurement.

All work performed under this contract shall be subject to the approval of the NSF-ICF Technical Director or Curator. Work unsatisfactorily completed shall be corrected at no additional cost to the U.S.

Government.

All work performed under this contract shall be subject to applicable local, state, and federal codes and regulations in force at the time the work is completed.

Weekly Maintenance: Contractor will be required to arrange a four- to five-hour per week maintenance schedule with the NSF-ICF Curator.

Emergency response time: Contractor shall acknowledge receipt of any notification for emergency response to the NSF-ICF duty personnel within 30 minutes of receipt of the notification and respond on-site within one hour of notification.

D. MONTHLY PREVENTATIVE MAINTENANCE

It is anticipated that these procedures can be conducted in 16-20 hours per month. The Contractor shall subdivide these hours into weekly 4-5-hour calls. A regular time and day of the week for maintenance will be arranged by mutual consent between the Contractor and the NSF-ICF Curator.

The Contractor shall record all maintenance calls and actions in the logbook provided in the NSF-ICF mechanical room, or within an identified electronic logging system, and shall report to the NSF-ICF Curator, Technical Director, or Assistant Curator during each site visit.

Irregularity in the operation of any part of the refrigeration system or any required repairs found during routine maintenance of the system will be brought to the attention of the NSF-ICF Technical Director or Curator.

The Contractor shall inform the NSF-ICF representative if additional parts or supplies are required for the maintenance of the freezer, mechanical systems, or ancillary components.

Maintenance procedures shall include, but not be limited to, the following:

D.1 Overall System:

1. Check and adjust as required:

a. Oil pressures

b. Oil temperatures

c. Suction pressures (low side)

d. Suction temperature

e. Discharge pressures (high side)

f. Discharge temperatures

g. Thermostat settings

h. Refrigerant and oil levels

i. Freon detector operation

2. Check oil for acidity and metals monthly. Report values.

3. Check for refrigerant leaks, repair and recharge system, as needed.

4. Check and change filter driers annually or as needed.

5. Check all contactor points. Replace, as needed.

6. Inspect system over pressure safety valves and burst disks. If tripped or burst, repair cause and replace valves and burst disks, as required.

7. Check temperature differential of all evaporators. Adjust, as needed.

8. Annually tighten all connections in the main (blue) electrical control panel.

9. Check the integrity of the system and plumbing insulation. Advise, repair, or replace, as needed.

D.2 Compressors:

1. Check all motor amperages; adjust to lowest reading as required.

2. Check and set all individual compressor electrical safety cut out switches every month, or more often, if needed. Switches include:

a. High pressure cut out

b. Low pressure cut out

c. Low oil pressure cut out

d. High discharge temperature cut out

3. Check oil filters for leaks monthly, replace oil filters at 6000hr and 12000hr rebuilds.

4. Check for loose fasteners and tighten to specification, as needed.

5. Check all electrical connections and tighten, repair, or replace, as needed.

6. Check compressor motor couplers. Adjust or replace, as needed.

7. Check shaft seals to see if leakage is within tolerance. Replace at next rebuild if out of tolerance.

8. Grease fittings of the electric motors after every 1,000 hours of operation.

D.3 Evaporative Condenser Units:

1. Check sump water level sensor in the operational evaporative condenser. Clean, adjust, repair or replace, as required.

2. Check evaporative condenser water level valve for proper operation. Repair or replace, as needed.

3. Monitor the level of solids in the bottom of the evaporative condenser sump. Clean and remove solids, as needed.

4. Communicate with water treatment contractor to remain apprised of water quality to ensure associated acceptability of the particulate levels in the condenser tower sump.

5. Check and tighten evaporative condenser blower wheels, as needed.

6. Check blower wheel shaft bearings and grease if required. If bearings are of sealed type, check to make sure the bearings are in good condition, and replace, if required.

7. Check damper doors in evaporative condensing unit ductwork for proper operation monthly. Lubricate, adjust or repair, as needed.

8. Inspect belts on evaporative condenser unit blower motors. Replace, as required.

9. Inspect water pumps and blower motors for both condenser towers monthly. Repair or replace as required. If under warranty, inform NSF-ICF Curator or Technical Director to request service from installation contractor.

10. Exercise both the pump motor and blower motor on the backup evaporative condenser monthly.

11. Check sump overflow/condensate tank weekly, make sure pumps, contactor switches and float level switches are operating correctly. Repair or replace, as required.

D.4 Evaporators in the Freezer:

1. Check amperages on all evaporator motors. Adjust, repair or replace, as needed.

2. Inspect belts on main storage evaporator blower motors for evidence of failure (cracks, splitting, delamination, or chunks missing); replace every 6 months or sooner, if required.

3. Check defrost heaters and drain pans heaters for correct operation on all evaporator units.

Adjust, repair or replace, as needed.

4. Check drains on drain pans in exam room and dock for proper drainage. Clean annually or more frequently, if required.

5. Check pan heaters and heat tape on all drain pans and drain pan lines for proper operation.

Replace, as needed.

6. Inspect all evaporator motors monthly. Repair, lubricate or replace, as needed. If motors contain sealed bearings, replace bearings, if possible; otherwise, replace motors.

7. Check and tighten all fan blades on evaporators.

D.5 Clean Room:

1. Check belts for any failure on clean room air handlers. Replace every 6 months or sooner, if required.

2. Replace pre-filters on clean room air handlers every 6 months.

D.6 Freezer Building:

1. Check and lubricate personnel and cargo doors, as needed.

a. Check safety latches to insure correct operation. Repair or replace, as needed.

b. Check all door seals on freezer doors. Repair or replace, as needed.

2. Check and repair all seals in freezer, as needed.

3. Check sub-floor heaters. Replace, as needed.

D.7 Compressor Rebuild

Periodic Compressor Overhaul and Inspection:

Two periodic overhauls are required for each compressor: 1) 6,000-hour overhaul/inspection ("6K overhaul"), and 2) 12,000-hour overhaul/inspection ("12K overhaul").

The 6K overhaul shall be carried out after 6,000 hours of compressor operation. The 6k overhaul is required after 6,000 hours of operation following 12k overhaul.

The 12K overhaul shall be carried out after every 12,000 hours of operation.

Two to four compressors shall need an overhaul each year.

1. The 6K overhaul consists of the following procedures:

Remove the shaft seal cover, head cover, hand hole cover and disassemble the pistons and connecting rods. In this inspection, it is not necessary to remove the crankshaft and bearing head, but the following operations are required:

1. Replace the suction and discharge plate valves and plate valve springs.

2. Replace the connecting rod bearing metals.

3. Inspect and replace the mechanical seal assembly, as required.

4. Replace the piston rings and oil rings.

5. Replace the gaskets and O-rings.

6. Inspect the connecting rods for abnormal wear or damage, and replace, if needed.

7. Inspect the piston pins (wrist pins) and replace if they are not within service limits.

8. Inspect the cylinder sleeves and pistons for abnormal wear or damage, and replace, if needed.

9. Inspect the crankshaft pins (connecting rod journals) for abnormal wear or damage; advise

NSF-ICF Curator or Technical Director if replacement is necessary.

10. Inspect and clean the interior filter screen.

11. Replace the exterior screw-on oil filter.

12. Clean the interior of the crankcase.

13. Replace the lubricating oil.

14. Grease fittings of the electric motors (preferably every 1,000 hours).

15. Replace the built-in safety valve if it has been actuated.

16. Replace the compressor oil filter.

2. The 12k overhaul will consist of the following procedures:

In addition to the disassembly, inspections, and replacements required in the 6K overhaul, the main bearing head and crankshaft must be removed and the following operations performed:

1. Inspect the main bearing and thrust bearing for abnormal wear or damage and replace, if needed.

2. Inspect the thrust pad and replace if it does not meet standards.

3. Inspect the crankshaft for abnormal wear or damage and advise NSF-ICF Curator or

Technical Director if replacement is necessary.

4. Inspect all other portions of the system and repair and/or replace, if needed.

D.8 Computer Control Inspection and Maintenance:

On a quarterly basis, check computer control system:

1. Check and ensure that control software is up to date. Update as needed.

2. Check and ensure that all program backups are up to date.

3. Adjust set points as needed.

4. Verify and test software operation.

5. Check and tighten all connections in automated computer control system panel and intermediate relay panel.

6. Verify correctness of logging histories from the control system.

7. Copy all stored histories to CD and give to the NSF-ICF Curator.

8. Advise NSF-ICF Curator or Technical Director of the need for upgrades, repairs, or replacements, as needed.

E. AS-NEEDED REPAIRS

As-needed repairs are defined as repairs not listed in Section D. Monthly Preventative Maintenance. As-needed repairs or replacement of parts may be identified during monthly preventative maintenance visits; repairs/replacements shall be performed during normal business hours and do not qualify as emergencies.

Contractor shall identify needed repairs or parts replacements, inform NSF-ICF staff, and schedule additional site visits to make required repairs or replace parts.

F. TRIP CHARGE

Contractor may apply flat trip charges for emergency visits and parts acquisition and delivery. Trip charges shall be submitted as separate invoices.

G. AFTER HOURS EMERGENCY RESPONSE AND REPAIRS:

Contractor shall be available 24 hours a day, 7 days a week, including holidays, for emergency on-call service. Emergency response and repairs applies to service calls in response to alarms caused by refrigeration system failures, and/or shutdowns, exclusive of scheduled monthly preventative maintenance.

Contractor shall acknowledge receipt of any notification for emergency response to the NSF-ICF duty personnel within 30 minutes of receipt of the notification and respond on-site within one hour of notification.

H. CONTRACTOR QUALIFICATIONS:

(NOTE TO OFFERORS: REQUIRED DOCUMENTATION LISTED BELOW SHALL BE SUBMITTED WITH YOUR

QUOTE)

REQUIRED QUALIFICATIONS FOR NSF ICE CORE FACILITY MECHANICAL SYSTEM CONTRACT:

1. Contractor and refrigeration technicians shall be fully licensed by the State of Colorado and shall comply with all Environmental Protection Agency (EPA) regulations regarding the handling, release, and disposition of chlorinated fluorocarbon compounds, specifically R-22.

2. Contractor shall have five or more R-22 qualified refrigeration technicians on staff with at least three technicians assigned to this contract such that if the lead technician or the other assigned technicians are unable to respond to an emergency situation, there are at least two technicians who understand the NSF-ICF refrigeration system who can respond and remedy the emergency situation.

Refrigeration Technicians assigned to this contract shall have following documented experience:

shall be Level III Journeyman or documented equivalent. (Requirements for Level III Certification include a) a minimum of 16,000 hours of on-the job training and experience; b) 1,440 hours of accredited classroom training; and c) continuation of approved accredited classroom training in order to maintain Level III status.)

at least five years documented experience maintaining and servicing R-22 refrigeration systems.

have previous documented experience with industrial low-temperature (-40o F or colder) and two-stage refrigeration systems.

experience with reciprocating-type compressors manufactured by Mycom Corporation.

3. Contractor shall also have at least one teletrol technician who has documented experience as a Teletrol integrator to maintain the Teletrol refrigeration control computer system.

4. Contractor shall provide resumes for all technicians assigned to this contract.

5. All technicians assigned to this contract must be able to pass stringent federal background checks to receive an access card to enter the Denver Federal Center after hours.

6. All technicians assigned to this contract must apply for and receive a DOI access card to gain access to the Denver Federal Center after normal operating hours, including weekends and holidays.

CLAUSES BY REFERENCE

52.203-3 Gratuities (Apr 1984) 52.204-9 Personal Identity Verification of Contractor Personnel (Jan 2011) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) 52.204-14 Service Contract Reporting Requirements (Oct 2016) 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.212-4 Contract Terms and Conditions-Commercial Items (Oct 2018) 52.219-14 Limitations on Subcontracting (Mar 2020) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2018) 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (Apr 1984) 52.243-3 Changes – Time and Materials or Labor Hour (Sep 2000) 52.243-1 Changes - Fixed-Price (Aug 1987)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items. (JULY 2021)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JUL 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108- 78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] _x_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUNE 2020), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

_x_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9

2018) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)

(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a).

__ (ii) Alternate I (MAR 2020) of 52.219-3.

__ (12)

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (MAR 2020) of 52.219-4.

__ (13) [Reserved] __ (14) X (i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

(15)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17)

(i) 52.219-9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (JUN 2020) of 52.219-9 __ (18)

(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f).

__ (22)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (NOV 2020) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (MAR 2020) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Mar2020) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15U.S.C. 637(a)(17)).

_x_ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

__ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN2020) (E.O.13126).

_x_ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

__ (30) X (i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

__ (31)

(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

__ (32) http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14…