The file's text, extracted by GovTribe without its formatting.
*SEE NOTES BELOW FOR NUMBERED FIELDS
| 1. RECORD OF TREATMENT AND TEST: |
| 2. CONTRACTOR: |
| CONTRACT NO: |
| DATE: |
| SPECIFICATION NO: |
| DRAWING NO: |
| DATE SHIPPED: |
| CHEMICAL ANALYSIS MADE BY: |
| METHOD/SPEC: |
| MACROETCH: |
| SATISFACTORY |
| FORMCHECKBOX |
| MACROETCH: |
| NOT TAKEN |
| FORMCHECKBOX |
| HEAT NO: |
| TYPE OF INGOT: |
| INGOT DIA: |
| INGOT LENGTH: |
| INGOT NO: |
| INGOT WEIGHT: |
| INGOTS/HEAT: |
| 3. HEAT TREATMENT: |
| HEAT TREATMENT PERFORMED BY: |
| MECHANICAL TESTS MADE BY: |
| SPECIMEN LOCATIONS |
| YS |
| TS |
| RA, % |
| 4. ELONG, % |
| 5. FRACTURE |
| HARDNESS |
| CHARPY, FT-LBS/JOULES |
NOTES: 1. ENTER THE NUMBERS OF ALL FORGINGS OR CASTINGS REPRESENTED BY THESE TESTS, MARKING WITH AN ASTERISK (*) THOSE FROM WHICH SPECIMENS ARE TAKEN. 2. ENTER FIRM NAME AND ADDRESS. 3. USE REMARKS
BLOCK. 4. INDICATE GAGE LENGTH AND WHETHER 4D OR 5D IN REMARKS BLOCK. 5. C=CUPPED; CR=CRYSTALLINE; I=IRREGULAR; N=NONMETALLIC; P=PITTED; L=LAMINATED; W=WOODY; LC=LUSTROUS CAVITIES.
6. WHEN REQUIRED, INDICATE + OR – VALUE. ALSO INDICATE ADJUSTED MECHANICAL PROPERTIES USING: ADJ VALUE = PROD VALUE + VALUE DIFFERENCE.
| GOVT INSPECTOR (TYPED NAME & SIGNATURE) |
| ORGANIZATION |
| DATE: |
| SIGNATURE AND TITLE OF CERTIFYING OFFICIAL: |
| DATE: |
SMCWV FORM 1155 1 AUGUST 1990 PREVIOUS EDITIONS OBSOLETE