SF18_SPE1C123Q0429 (1).PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE1C1-23-Q-0429

1. REQUEST NO.

2023 AUG 23

2. DATE ISSUED

7004200676

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: Charles Brown PCPQCB9 Tel: 215-737-2450 Fax: 215-737-2486 Email: CHARLES.BROWN3@DLA.MIL

2023 NOV 24

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2023 SEP 06

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 28 PAGES

SPE1C1-23-Q-0429

This solicitation/award includes domestic preference requirements as identified in the Berry Amendment. Offers are cautioned that ALL components must be of domestic origin in compliance with clause 252.225-7012, Preference for Certain Domestic Commodities (APR 2022) as contained in Section I of this solicitation.

The Government will evaluate quotes utilizing a Best Value Tradeoff methodology considering the following evaluation factors: price and past performance. These factors are equal in importance. The Government reserves the right to pay a reasonable premium to a responsive offer for better past performance. This means that the Government may make an award to a vendor that submits other than the lowest evaluated price. Past performance evaluation will utilize the Supplier Performance Risk System (SPRS) and will be evaluated in accordance with DFARS 252.213-7000.The evaluation criteria stated in this paragraph supersede any inconsistent provisions contained elsewhere in the solicitation.

Award will be made to the offer that represents the best value to the government

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS (PART 13) REVISION 93 (August 3, 2023) WHICH CAN BE FOUND ON THE WEB AT: https:// www.dla.mil/Portals/104/Documents/J7Acquisition/MasterSolicitation4ASAcqRev-93_August_3_2023.pdf

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

OFFERORS ARE REQUIRED TO COMPLY WITH DOMESTIC MATERIAL RESTRICTIONS. THE BERRY AMENDMENT, THE BUY AMERICAN ACT, AND OTHER DOMESTIC MATERIAL RESTRICTION MAY APPLY. OFFERORS ARE INSTRUCTED TO REFER TO THE SOLICITATION CLAUSES RELATED TO FOREIGN SOURCING FOR MORE INFORMATION ON APPLICABILITY. THE BERRY AMENDMENT THRESHOLD HAS BEEN REDUCED TO $150,000 AND VENDORS MUST CAREFULLY REVIEW RELATED CLAUSES DFARS 252.225-7006, 252.225-7012, AND 252.225-7015 FOR APPLICABILITY REQUIREMENTS. IF YOUR OFFER IS BASED ON A NON-DOMESTIC MATERIAL, YOU ARE REQUIRED TO PROVIDE DISCLOSURE INFORMATION IN YOUR QUOTE AND/OR THROUGH WRITTEN NOTIFICATION TO THE POINT OF CONTACT LISTED IN THE SOLICITATION.

Price Sustainability

As part of the United States Defense Industrial Base, offerors are strongly encouraged to develop pricing that adequately accounts for market risk and volatility, includes sufficient margins to withstand future unforeseen contingencies, and allows for long term viability.Offerors are advised to refrain from submitting any offers or bids with the anticipation that in the event costs increase that there may be a price adjustment and/or cancellation of the contract. Offers are reminded that the awardee is expected to, and will be contractually bound to, perform at the final pricing submitted for the duration of the contract performance period(s) established in this solicitation. The successful performance of your contract is critical to the continued support of our nation’s warfighters.

*FAR 52.248-01, Alt III Value Engineering is applicable to this award.

Five (5) Physical first article samples maybe required by the end user and submitted to Contracting Officer.

Repeated First Article failure may result in termination for default.

FIRST ARTICLES. Five (5) First Articles samples will be due on or before 30 days after date of award.

*The Quality Standards of DPSCM 4155.3 apply to this acquisition

*VIM-ASAP is the ONLY authorized method to electronically process requests for payment to WAWF-RA.

*YOU MUST REGISTER IN VIM TO INVOICE ELECTRONICALLY

*If you are not registered to access VIM please go to vim.dla.mil and contact the VIM helpdesk desk at VIMSUPPORT@dla.

mil

CAUTION NOTICE - CONTRACTOR CODE OF BUSINESS ETHICS (NOV 2022)

PAGE 3 OF 28 PAGES

SPE1C1-23-Q-0429

FAR Part 3.1002(a) requires all government contractors to conduct themselves with the highest degree of integrity and honesty. Contractors should have a written code of business ethics and conduct within thirty days of award. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and compliance training program that facilitates timely discovery and disclosure of improper conduct in connection with government contracts and ensures corrective measures are promptly instituted and carried out. A contractor may be suspended and/or debarred for knowing failure by a principal to timely disclose to the government, in connection with the award, performance, or closeout of a government contract performed by the contractor or a subcontract awarded there under, credible evidence of a violation of federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in title 18 of the United States Code or a violation of the False Claims Act. (31 U.S.C.

3729-3733)

If this solicitation or contract includes FAR clause 52.203-13

- CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT; the contractor shall comply with the terms of the clause and have a written code of business ethics and conduct; exercise due diligence to prevent and detect criminal conduct; promote ethical conduct and a commitment to compliance with the law within their organization; and timely report any violations of federal criminal law involving fraud, conflict of interest, bribery or gratuity violations found in title 18 of the United States Code or any violations of the False Claims Act. (31 U.S.C. 3729-3733) When FAR 52.203-13 is included in the contract, contractors must provide a copy of its written code of business ethics and conduct to the contracting officer upon request by the contracting officer.

CAUTION NOTICE – PATIENT PROTECTION AND AFFORDABLE HEALTH CARE ACT:

Please note that the Patient Protection and Affordable Health Care Act ("the Act"), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

CAUTION NOTICE – E-VERIFY:

Pursuant to FAR clause 52.222-54 vendors are required to enroll in the E-Verify program within thirty days after the date of a contract award and comply with all terms of the clause. In addition, vendors are required to provide evidence of their enrollment in the E-verify program to the contracting officer within 30 days after the date of a contract award.

PAGE 4 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLIES/SERVICES: PGC: 18919

ITEM DESCRIPTION:

BLANKET, BED; WOOL<(>,<)>

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

Latest revision MIL-DTL-43665D 02SEPT2020

Mothproofing Treatment:

Mothproof testing is in Accordance with MIL-DTL-43665D Cloth Wool.

Latest revision is NCTRF PD 10-12A, 06 May 2022

REPLACES 7210-00-082-5668 NCTRF PD-10-12

97% WOOL MINIMUM 84 INCHES LONG BY 66 IN. WIDTH, NAVY GRAY 3119

3 LB 12 OZ FINISHED WEIGHT MINIMUM

STANDARD SAMPLE FOR CADET GREY 3119 IS

IDENTIFIED AS PIECE # 96263 & REFERENCED FOR

SHADE, COLORFASTNESS & FINISH: INTERIM CHANGES TO NCTRF PD-10-12 Page 4 3.4, Table I, Row 2, Line 3, delete entry for "Fabric Weight" in its entirety. CONFORMANCE TESTING AFTER EVERY 5000 PIECE LOT, 3 BLANKETS

WILL BE SUBMITTED FOR TESTING FOR PH, SHADE AND THERMAL INSULATION. NAVY

WILL PERFORM THE THERMAL INSULATION TESTING. INTERIM CHANGES TO

MIL-C-43665C: Page 2 After 2.2, add new paragraph. "2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. ,, AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS AATCC 86 -

Drycleaning: Durability of Applied Designs and Finishes (Copies of these documents are available online at http://www.aatcc.org or AATCC, P.O. Box 12215, Research Triangle Park, NC 27709-2125.) ,,ASTM INTERNATIONAL ASTM D1776 - Standard Practice for Conditioning and Testing Textiles (Copies of these documents are available on line at http://www.astm.org or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-259.)". 3.2, Line 2, delete "either" with "the". Line 3, after "or cloth" insert "or the compound specified in Table IA to cloth". Page 3 3.2, Table I delete entry for Sodium [(4, 5-dicholor, 2-choromethane sulfonamide#(see 6.3.2) and substitute new entry. ________________________________________________________________ Mothproofing compound,, 3-Phenoxybenzyl(1RS)-cis,trans-3-(2,2-dich lorovinyl)-2,2-dimethylcyclopropane-carboxylate 2/ Percent by volume commercial formulation per weight of cloth 1/ ,,,,,,,,,,,,,,Minimum,,,, ,,,,Maximum Before Dry Cleaning,,,,,,0.058,,,,,,,,0.40 After Dry Cleaning,,,,,,0.029,,,,,,,,0.40 1/ When the commercial formulation is 10% weight active ingredient/volume of formulation. 2/Also known by the generic name, permethrin.

________________________________________________________________ 3.4 Line 3, after "3.2" insert "Table I". After 3.4, insert new paragraph:

"3.4.1 Percent of mothproofing compound. The percentages of mothproofing compound specified in Table IA shall be based on percent volume of commercial formulation on weight of cloth when tested by high performance liquid chromatography. The percentages as written are based

PAGE 5 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

on a liquid commercial formulation that is 10% by weight of permethrin per volume of formulation. (See 4.2.2 and 4.3)." Page 5 4.2.2, Table II, Test method column, line 9, delete "2015" and substitute "2015.3". Lines 10, 11 and 12, delete entry for "Sodium [4, 5-dichloro, 2-chloro-methane sulfonamide) 3', 4', 6', trichloro] diphenyl ether" in its entirety and substitute new entry Characteristic,, Requirement ,, Test 3-Phenoxybenzyl (IRS-cis,trans- paragraph method 3-(2 ,2-dichlorovinyl)2,2- 3.4.1,,,, 4.3.1 7/ dimethylcyclopropane-carboxylate,, ____________________________________________________________ At end of table, add new footnote: "7/ The sample shall be dry-cleaned for three cycles in accordance with AATCC Test Method 86 before determining mothproofing compound content." Pages 6 through 8 4.3.1 through 4.3.1.8.1, Delete in their entirety and substitute: "4.3.1 Determination of 3-Phenoxybenzyl (1RS)-cis,trans-3-(2,2-dichlorovinyl)-2 ,2-dimethylcyclopropanecarboxylate content (see 6.4). 4.3.1.1 Test specimen. The specimen shall weigh 5.000 grams ± 0.200 gram and be conditioned as specified in ASTM D 1776. 4.3.1.2 Number of determinations. Unless otherwise specified, two specimens shall be tested from each sample unit. 4.3.1.3 Apparatus a. Pyrex culture tubes with closures b. Ultrasonic water bath c. 25 mL volumetric flasks d. 10 mL volumetric flasks e. High performance liquid chromatograph with UV detector, recorder, integrator, and reverse phase column. Manual injection valve or autosampler. f. syringe for manual injection, if needed g. Analytical balance h. 10 mL graduated cylinder 4.3.1.4 Reagents. a. Methanol, analytical or HPLC grade b. Water, HPLC grade c.

3-Phenoxybenzyl (1RS)-cis,trans-3-(2,2-dichlorovinyl)-2 ,2-dimethylcyclopropane-carboxylate (see 6.4) 4.3.1.5 Testing of specimens. Weigh (± 0.001 g) the empty culture tube and stopper. Cut the specimen into small pieces and place in the culture tube. Record the mass of the specimen (± 0.001 g). Add 10 mL methanol and seal the culture tube. Immerse in the ultrasonic bath for 90 minutes. Cool to room temperature. Weigh the culture tube, wool, and methanol (± 0.001 g). Record the mass of the methanol after sonication; calculate the actual volume of methanol using a density of 0.718 g/mL. Filter approximately 1 mL of methanol solution using a disposable syringe filter (0.45 ?m pore size) into a sample vial prior to analysis. Store remaining sample refrigerated at 4 °C for prolonged periods. 4.3.1.6 Preparation of standards. 4.3.1.6.1 Primary stock solution (400 ppm permethrin in methanol) a. Weigh the full vial containing approximately

0.010 g of authentic standard. b. Empty the vial into a 25 mL volumetric flask. c. Weigh the empty vial and calculate the mass of authentic standard actually added. d. Dilute to 25 mL with methanol. e.

Calculate actual concentration. 4.3.1.6.2 Secondary stock solution (160 ppm permethrin in methanol) a. Pipet 4.00 mL of primary stock solution into a 10 mL volumetric flask. b. Dilute to 10 mL. ,, c. Calculate actual concentration. 4.3.1.6.3 Analytical Standard 1 (32 ppm permethrin in methanol) a. Pipet 2.00 mL of secondary stock solution into a 10 mL volumetric flask. ,, b. Dilute to 10 mL. ,, c. Calculate actual concentration. 4.3.1.6.4 Analytical Standard 2 (24 ppm permethrin in methanol) ,, a. Pipet 1.50 mL of secondary stock solution into a 10 mL volumetric flask. ,, b. Dilute to 10 mL. ,, c. Calculate actual concentration. 4.3.1.6.5 Analytical Standard 3 (16 ppm permethrin in methanol) ,, a. Pipet 1.00 mL of secondary stock solution into a 10 mL volumetric flask. ,, b. Dilute to 10 mL. ,, c. Calculate actual concentration 4.3.1.6.6 Analytical Standard 4 (8 ppm permethrin in methanol) ,, a. Pipet 0.500 mL of secondary stock solution into a 10 mL volumetric flask. ,, b. Dilute to 10 mL. ,, c. Calculate actual concentration. 4.3.1.6.7 Analytical Standard 5 (1.3 ppm permethrin in methanol) ,, a. Pipet 0.080 mL of secondary stock solution into a 10 mL volumetric flask. ,, b. Dilute to 10 mL. ,, c. Calculate actual concentration. 4.3.1.7 Instrument settings. The following, or equivalent, parameters will be used in analysis: ,,Column: Zorbax Eclipse XDB-C18 (4.6 x 150 mm, 5 um) ,,Eluent: 20:80 distilled water/methanol ,,Eluent should be filtered and degassed before use. ,, Flow rate: 2.2 mL/min ,,Column temperature: 40 °C ,,Injection volume: 20 uL ,,Detector wavelength 230 nm ,,Analysis time:

approximately 15 minutes ,,Retention times: trans permethrin, approximately 10.0 minutes; cis-permethrin, approximately 12.8 minutes

4.3.1.8 Calculations. The HPLC conditions employed here resolve the cis and trans permethrin isomers. Construct a calibration graph for each isomer using peak area. Determine a result for the two isomers present in each test sample by comparison with the calibration graph. Mean response factors calculated from the five standards should be used. The true result is a weighted average of the individual cis and trans

PAGE 6 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

results. This method of calculation allows the result for a multicomponent insect resist agent to contain contributions from all the active ingredients and compensates for any difference in the proportions of the two isomers between standards and test extracts. The test sample treatment level is determined from the following relationship: Sample conc. (ppm) = Sample PAt x SRFt x SWFt + Sample PAc x SRFc x SWFc Where:

PAt = peak area of trans isomer PAc = peak area of cis isomer RFf = trans isomer response factor = conc./PAt RFc = cis isomer response factor = conc./PAc SRFt = standard mean trans isomer response factor SRFc = standard mean cis isomer response factor WFt = trans weighting factor = PAt/(PAt + PAc) WFc = cis weighting factor = PAc/(PAt + PAc) SWFt = standard mean trans isomer weighting factor SWFc = standard mean cis isomer weighting factor %wt/wt=V×S×1/W×100 Where: P = permethrin M = methanol T = texile V = volume of methanol after sonication in L S = sample concentration in ppm (mg/L; mg of P/L of M) W = original weight of the textile sample in mg %vol/wt=%wt/wt×100/C Where: F = formulation C = commercial formulation in % wt/vol (% wt of P/vol of F) % vol/wt = percent vol of F/wt of T The requirements were established when C = 10% wt/vol 4.3.1.9 Report. 4.3.1.9.1 Mothproofing compound content. The percent mothproofing compound content of a sample unit shall be reported as the average of the values obtained for the specimens tested and shall be reported with two significant figures. The individual values for each individual specimen used to calculate the average shall be reported to the nearest 0.001 percent.". Page 9 6.3.2, 6.4, 6.5, 6.6, Delete and substitute: "6.3.2 3-Phenoxybenzyl(1RS)-cis,trans-3-(2 ,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate. The formulation containing 3-phenoxybenzyl(1RS)-cis,trans-3-(2,2-dichlorovinyl)-2 ,2-dimethylcyclopropanecarboxylate may be obtained under the trade name Edolan ETS from StarChem, LLC, 10150 Greenville Hwy, Wellford, SC 29385.

6.4 Active (pure) material content. This method determines the content of mothproofing agent as 100 percent (pure) material. This value is then mathematically converted to content of mothproofing agent as a percentage of commercial formulation (% vol/wt). The commercial product has a concentration of active material of 12 percent by weight (% wt/wt). The density of the commercial product is 0.83 g/mL, thus the concentration of the active material is 10 percent by volume (% wt/vol).

Permethrin standard shall be ?97%, mixture of cis/trans Isomers.

Permethrin standards are available from FMC Agricultural Products;

Princeton, NJ 08543; FMC reference #33297; 97% purity/specified technical; AccuStandard; New Haven, CT 06513; reference # P-128N, or equal. (see 4.3.1 and 4.3.1.6). 6.5 High performance liquid chromatography. An Agilent 1200 series high performance liquid chromatograph is suitable for the determination. Other comparable equipment and column materials may be substituted. The suitability should be determined by making test runs with standard solutions of known concentrations (see 4.3.1.6). 6.6 Extraction. The described extraction method removes 84 percent or more of the active material on the fiber. Aside from the active mothproofing agent, the methanol extract can contain other extractable substances such as dyes. These have not been found to have any influence on the determination of the active content of mothproofing agent (see 4.3.1.5). Other extraction methods, such as soxhlet extraction may be substituted." Page 10 Under "Review Activities" add "Navy-SH". Page 11 Delete figure 1 in its entirety.

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

PAGE 7 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE

SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1,

PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA.

5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER

"TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE

LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500

VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A

PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE

(5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED.

THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE

PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL

DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT

NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE

SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

"REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS

THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS

DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN

4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER

PAGE 8 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE

INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE

WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY

FOR THE TEST."

(Ref. T0215)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

NO ADDITIONAL INFORMATION FOLLOWS

(Ref. T0898)

This device or drug is regulated by the FDA.

Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation.

Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

IAW BASIC DRAWING NR 32263 NCTRF-PD-10-12A

REVISION NR A DTD 05/06/2022

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-32075A

REVISION NR A DTD 10/01/2020

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-43665D

REVISION NR D DTD 09/02/2020

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-147E(2)

REVISION NR E DTD 06/27/2019

PART PIECE NUMBER:

PAGE 9 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

IAW REFERENCE CID A-A-52094B

REVISION NR B DTD 05/01/2019

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-191A(6) NOT 7

REVISION NR A DTD 08/09/2000

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ASQ Z1.4 (R 2018)

REVISION NR DTD 01/01/2003

PART PIECE NUMBER:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 7210-01-609-3729 2,785.000 EA $ ________________ $ ________________

BLANKET,BED

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2023 NOV 24

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:008 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:O

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

WHENEVER POSSIBLE AND WHEN PERMITTED BY THE

TERMS OF THE CONTRACT, AVOID THE USE OF

PLASTICS AS WRAPPING, CUSHIONING, OR

DUNNAGE MATERIALS.

DGSC HAS WAIVED THE REQUIREMENTS OF

MIL-L-61002 AS CITED IN MIL-STD-129L,

MILITARY STANDARD, MARKING FOR SHIPMENT

AND STORAGE. MIL-STD-129K REQUIREMENTS

SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002

REQUIREMENTS. EXCEPT FOR THE WAIVER OF

MIL-L-61002 REQUIREMENTS, ALL OTHER

MIL-STD-129L REQUIREMENTS SHALL APPLY.

END OF MARKING WAIVER.

PARCEL POST ADDRESS:

SD0131

TRAVIS ASSOCIATION FOR THE BLIND

4512 SOUTH PLEASANT VALLEY ROAD

AUSTIN TX 78744-1812

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

SD0131

TRAVIS ASSOCIATION FOR THE BLIND

PAGE 10 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION B

SUPPLY/SERVICE: PGC: 18919 CONT'D

AF & MC 3PL - DISTRIBUTION SERVICES

4512 S PLEASANT VALLEY RD DOCKS 1-4

AUSTIN TX 78744

US

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7004200676 0001 N/A N/A 7210016093729 11/23/2023

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 28 PAGES

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (MAR 2023)

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

SECTION F - DELIVERIES OR PERFORMANCE

52.211-16 VARIATION IN QUANTITY (APR 1984) FAR

As prescribed in 11.703(a), insert the following clause:

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause.

(b) The permissible variation shall be limited to:

0 Percent increase 0 Percent decrease This increase or decrease shall apply to 0001.*

(End of clause)

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

SECTION I - CONTRACT CLAUSES

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (NOV 2021) FAR

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022) DFARS

(a) Definitions. As used in this clause --

“Component” means any item supplied to the Government as part of an end product or of another component.

“End product” means supplies delivered under a line item of this contract.

"Qualifying country" means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

https://www.acquisition.gov/far/part-11

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION I - CONTRACT CLAUSES (CONTINUED)

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Structural component of a tent” --

(1) Means a component that contributes to the form and stability of the tent (e.g., poles, frames, flooring, guy ropes, pegs); and

(2) Does not include equipment such as heating, cooling, or lighting.

“United States” means the 50 States, the District of Columbia, and outlying areas.

“U.S.-flag vessel” means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b) The Contractor shall deliver under this contract only such of the following items, either as end products or components, that have been grown, reprocessed, reused, or produced in the United States:

(1) Food.

(2) Clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing and the materials components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear. footwear, hosiery, handwear, belts, badges, and insignia.

(3)(i) Tents and structural components of tents;

(ii) Tarpaulins; or

(iii) Covers.

(4) Cotton and other natural fiber products.

(5) Woven silk or woven silk blends.

(6) Spun silk yarn for cartridge cloth.

(7) Synthetic fabric, and coated synthetic fabric, including all textile fibers and yarns that are for use in such fabrics.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION I - CONTRACT CLAUSES (CONTINUED)

(8) Canvas products.

(9) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles).

(10) Any item of individual equipment (Federal Supply Class 8465) manufactured from or containing fibers, yarns, fabrics, or materials listed in this paragraph (b).

(c) This clause does not apply --

(1) To items listed in section 25.104(a) of the Federal Acquisition Regulation, or other items for which the Government has determined that a satisfactory quality and sufficient quantity cannot be acquired as and when needed at U.S. market prices;

(2) To incidental amounts of cotton, other natural fibers, or wool incorporated in an end product, for which the estimated value of the cotton, other natural fibers, or wool --

(i) Is not more than 10 percent of the total price of the end product; and

(ii) Does not exceed the threshold at Defense Federal Acquisition Regulation Supplement 225.7002-2(a);

(3) To waste and byproducts of cotton or wool fiber for use in the production of propellants and explosives;

(4) To foods, other than fish, shellfish, or seafood, that have been manufactured or processed in the United States, regardless of where the foods (and any component if applicable) were grown or produced. Fish, shellfish, or seafood manufactured or processed in the United States and fish, shellfish, or seafood contained in foods manufactured or processed in the United States shall be provided in accordance with paragraph (d) of this clause;

(5) To chemical warfare protective clothing produced in a qualifying country; or

(6) To fibers and yarns that are for use in synthetic fabric or coated synthetic fabric (but does apply to the synthetic or coated synthetic fabric itself), if --

(i) The fabric is to be used as a component of an end product that is not a textile product. Examples of textile products, made in whole or in part of fabric, include ¾

(A) Draperies, floor coverings, furnishings, and bedding (Federal Supply Group 72, Household and Commercial Furnishings and Appliances);

(B) Items made in whole or in part of fabric in Federal Supply Group 83, Textile/leather/furs/apparel/findings/tents/flags, or Federal Supply Group 84, Clothing, Individual Equipment and Insignia;

(C) Upholstered seats (whether for household, office, or other use); and

(D) Parachutes (Federal Supply Class 1670); or

(ii) The fibers and yarns are para-aramid fibers and continuous filament para-aramid yarns manufactured in a qualifying country.

(d)(1) Fish, shellfish, and seafood delivered under this contract, or contained in foods delivered under this contract --

(i) Shall be taken from the sea by U.S.-flag vessels; or

(ii) If not taken from the sea, shall be obtained from fishing within the United States; and

(2) Any processing or manufacturing of the fish, shellfish, or seafood shall be performed on a U.S.-flag vessel or in the United States.

(End of clause)

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) FAR

52.204-14 SERVICE CONTRACT REPORTING REQUIREMENTS (OCT 2016) FAR

52.204-15 SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-DELIVERY CONTRACTS (OCT 2016) FAR

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020) FAR

https://www.acq.osd.mil/dpap/dars/dfars/html/current/225_70.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 28 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR

52.204-20 PREDECESSOR OF OFFEROR (AUG 2020) FAR

As prescribed in 4.1804(d), insert the following provision:

(a) Definitions. As used in this provision -- Commercial and Government Entity (CAGE) code means --

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name.

The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code: (or mark “Unknown”).

Predecessor legal name: .

(Do not use a “doing business as” name).

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY

KASPERSKY LAB AND OTHER COVERED ENTITIES (NOV 2021) FAR

As prescribed in 4.2004 , insert the following clause:

(a) Definitions. As used in this clause -- Covered article means any hardware, software, or service that --

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means --

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from --

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable; supplier name; brand;

model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), including in all subcontracts for the acquisition of commercial products or commercial services.

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS

https://www.acquisition.gov/far/part-4 https://dibnet.dod.mil https://dibnet.dod.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 28 PAGES

SPE1C1-23-Q-0429

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) DFARS

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (JAN 2023) DFARS

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN

2023) DFARS

52.209-4 FIRST ARTICLE APPROVAL---GOVERNMENT TESTING (SEP 1989) FAR

As prescribed in 9.308-2 (a) and (b), insert the following clause:

(a) The Contractor shall deliver 5 unit(s) of Lot/Item 0001 within 30 calendar days from the date of this contract to the Government at DLA TROOP SUPPORT 700 ROBBINS AVE PHILADELPHIA, PA 19111 BUILDING 3A WORKSTATION 4005 ATTN: CHARLES BROWN ii for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. The characteristics that the first article must meet and the testing requirements are specified elsewhere in this contract.

(b) Within 30 calendar days after the Government receives the first article, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

(c) If the first article is disapproved, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time specified by the Government. The Government shall act on this first article within the time limit specified in paragraph (b) of this clause. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests.

(d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.

(e) Unless otherwise provided in the contract, the Contractor -

(1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and

(2) Shall remove and dispose of any first article from the Government test facility at the Contractor's expense.

(f) If the Government does not act within the time specified in paragraph (b) or (c) of this clause, the Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.

(g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test.

(h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor.