The file's text, extracted by GovTribe without its formatting.
Aviation Calibration Provider Services
FY-2022
Aviation Training Center (ATC) Mobile, AL 8501 Tanner-Williams Road. Mobile, AL 36608
Statement of Work:
Purpose: Employ an accredited and certified calibration laboratory to provide electrical, pressure, torque, mechanical, physical/dimensional calibration, certification, repair and maintenance of aviation test and support equipment as directed by COMDTINST M13020.1G and CGTO PG-85-00-110 and in accordance with the requirements of ISO/IEC 17025, ANSI/NCSL Z450-1 and ANSI/NCSL Z540.3 or other industry criteria, where applicable, using standards whose accuracies are NIST traceable to the International Systems of Units.
Task Requirements:
A. Accredited calibration laboratory shall provide proof of current ANSI/NCSL Z450-1 and ANSI/NCSL Z540.3 accreditation in combination with ISO/IEC 17025 by A2LA or equivalent. Each calibration shall be subject to accredited calibration laboratory Quality Control oversight and shall be completed by technical experts who have documented certified training in the field of metrology.
B. Each below-listed asset shall be accompanied by a current Certificate of Calibration, which shall state as a minimum the following information:
1. Asset Under Test (manufacturer, model number, serial number and calibration period)
2. Manufacturer Specifications (nominal sensitivity)
3. List of each Reference Standard used to test asset (calibration system, firmware, manufacturer, model number, serial number, date of last calibration and calibration due date)
4. Nominal Laboratory Conditions (temperature and humidity)
5. Test Profile (readings tested and respective results)
6. Calibration technician name and signature
7. Date asset under test certified C. Each below-listed asset shall be calibrated in an environmentally controlled test area with proper heating, air conditioning, moisture control, and dust protection. ATC Mobile can provide an acceptable space to conduct On-Site calibration of items that do not require transport to the calibration facility. ATC Mobile does not have a dedicated 68-degree room; the calibration laboratory must provide and utilize such a space when calibrating items requiring a dedicated 68-degree room.
D. Each below-listed asset shall be calibrated by an accredited calibration laboratory who assumes primary responsibility for acquiring the required service and/or procedural guideline documentation, standards and accompanying support accessories/tools for each calibrated item.
E. Each below-listed asset shall be calibrated using a valid calibration procedure based on the manufacture’s recommendations and covering all aspects of the instrument under test. All aspects of the calibration are accurately documented. Calibration accomplished incorporates best calibration practices ensuring product quality in accordance with the standards specified in calibration procedural guides and appropriate technical orders:
1. AFTO 33K-1-100C
2. Metrology Requirements List NAVAIR 17-35 MTL-1
3. AFTO 00-20-14
4. Original Equipment Manufacturer’s (OEM) technical maintenance/repair manual F. Upon completion of calibration procedures and asset certification, the company calibration decal/label is affixed to each calibrated asset showing equipment ID/Serial Number in addition to the month, day and year of calibration and the next calibration due date in the same format (YYYYMMDD or MM/DD/YYYY). Instrument’s Certification Decal will also display and clearly identify the certified points or ranges (or the limitations) on the instrument to include: Direction (clockwise or counterclockwise); Position (horizontal or vertical) and/or Deviation (+/- percentage or value). Tamper proof seals shall be affixed to completed assets to ensure calibration validity.
G. Turnaround Time is defined as the number of elapsed calendar days from receipt of asset to the date asset returned to ATC Mobile. Normal and routine turnaround time not to exceed four (4) weeks. ATC Mobile may request a priority calibration for an accelerated turnaround time on a specific asset required by Aviation Engineering Department to complete critical aircraft maintenance. Accelerated turnaround time not to exceed seven (7) calendar days.
H. All repairs will require approval authorization by ATC Mobile prior to work commencing above and beyond calibration. ATC Mobile will be notified if asset cannot pass calibration certification attributable to repair(s) needed, prior to asset being processed for return to ATC Mobile. If repair is required in order for asset to pass calibration inspection, accredited calibration laboratory will provide ATC Mobile with a written report of findings to include:
1. Discrepancies found
2. Repair component part number and quantity
3. Total invoice repair cost I. Accredited calibration laboratory will conduct On-Site calibration (as applicable), and/or make pick-ups and drop-offs every month at ATC Mobile Hangar 2 on a prearranged date and time agreed to by the ATC personnel listed in this document. At that time, a receipt document listing all assets picked up from ATC Mobile and a separate receipt document listing all assets delivered to ATC Mobile shall be reviewed, dated and signed by both the ATC Mobile representative and the calibration laboratory representative present. In the event On-Site calibration is to be conducted, a document listing all assets provided by ATC Mobile for On-Site calibration and a separate document listing all assets that calibration was completed on shall be reviewed, dated, and signed by both the ATC Mobile representative and the calibration laboratory representative present.
J. In the event a priority calibration or accelerated turnaround time is requested for a specific asset, the accredited calibration laboratory shall make arrangements with the ATC Mobile representative for return of the item outside of the regularly scheduled monthly drop-offs. Options to return the item to ATC Mobile may include: special drop-off of item at ATC Mobile with no other pick-ups, pick-up of item by ATC Mobile representative at calibration laboratory (not to exceed 60 minute round trip), or meeting at a designated place to receive the item which must be agreed to by the ATC Mobile representative.
K. Transport of assets shall be protected from the elements (including temperature and humidity) and excessive shock and vibration in a protective case/container. Padding protection between assets in the same vehicle will be required to protect knobs, dials and meter faces from damage if the load shifts. Physical characteristics of individual assets will dictate the extent of protection required during transportation. Accredited calibration laboratory must utilize packaging and shipping standards that meet or exceed those set forth in MIL-STD-2073-1E.
L. On-Site calibration service is authorized for all assets listed below. On-Site calibration is required only for Aviation Battery Charger/Analyzers (RF80-K and RF80-M), AirBus Military Pressure Gauge Kit and Doran Digital Bench Scale. This On-Site calibration is necessary due to ATC Mobile’s aviation-specific NiCad and Lead Acid battery cells required to complete instrumentation calibration. If On-Site calibration will result in a flat or per-site visit fee, this fee must be submitted with the bid. If quantity of items to be calibrated On-Site exceeds what can be calibrated during standard workday hours (8:00 am to 5:00 pm), technician will return the following day to finish calibrating remainder of items on list.
M. Accredited calibration laboratory shall provide an itemized billing statement each month, listing fee for each individual below-listed asset with the correct model/part number. Repair fees are to be reported separately.
Aviation Test and Support Equipment Assets:
| Model/Part No. |
| Nomenclature |
| Manufacturer |
| Unit Price |
| Extended Price |
| 25CCN-28B21 or 322AS155-1R/25CCN-28B21 |
| Dial Indicating |
Pressure Gauge (Dry)
| 3D Instruments Accu-Drive |
| $0.00 |
| $0.00 |
| 322AS155-1R/25CCN-28B21 or 25CCN-28B21 |
| Dial Indicating |
Pressure Gauge (Dry)
| 3D Instruments Accu-Drive |
| $0.00 |
| $0.00 |
| EJ Series |
| Compact Balance Scale |
| A and D Engineering, Inc. |
| $0.00 |
| $0.00 |
| 1035 |
| Megohmmeter (Digital) |
| AEMC Instruments |
| $0.00 |
| $0.00 |
| 1039 |
| Megohmmeter (Digital) |
| AEMC Instruments |
| $0.00 |
| $0.00 |
| 81101A |
| Pulse Generator |
| Agilent Technologies |
| $0.00 |
| $0.00 |
95-92134-001 *On-Site calibration is REQUIRED*
| Pressure Gauge Kit |
| Airbus Military |
| $0.00 |
| $0.00 |
| 484 |
| Dial Indicator |
| Ames |
| $0.00 |
| $0.00 |
| CP-200 |
| Digital Gauge |
| Ametek |
| $0.00 |
| $0.00 |
| Kit Part Number DLM-1000 (includes P/Ns: 410391, 410400, 410401) |
| Radiometer Readout Unit, Black Light Sensor, White Light Sensor |
| Ardrox |
| $0.00 |
| $0.00 |
| 64-633 |
| Digital Torque Tool Tester |
| Armstrong |
| $0.00 |
| $0.00 |
| 64-637 |
| Digital Torque Tool Tester |
| Armstrong |
| $0.00 |
| $0.00 |
| 64-647 |
| Digital Torque Tool Tester |
| Armstrong |
| $0.00 |
| $0.00 |
| 64-657 |
| Digital Torque Tool Tester |
| Armstrong |
| $0.00 |
| $0.00 |
| 348260 |
| Pressure Gauge |
| Ashcroft |
| $0.00 |
| $0.00 |
| 1009 Series |
| Pressure Gauge |
| Ashcroft |
| $0.00 |
| $0.00 |
| 1279 Series |
| Pressure Gauge (Dry) |
| Ashcroft |
| $0.00 |
| $0.00 |
| 2074 Series |
| Digital Industrial Gauge |
| Ashcroft |
| $0.00 |
| $0.00 |
| P-575 Series |
| Dial Pressure Gauge (Dry) |
| Ashcroft |
| $0.00 |
| $0.00 |
| 38653-K |
| Digital Self-Indicating Thermometer |
| Atkins Technical, Inc. |
| $0.00 |
| $0.00 |
| BM403/2 |
| Digital Megger |
| AVO |
| $0.00 |
| $0.00 |
30V/3A
| B&K Precision Corp. |
| $0.00 |
| $0.00 |
| 1745A |
| DC Power Supply |
| B&K Precision Corp. |
| $0.00 |
| $0.00 |
| 810C |
| Capacitance Meter |
| B&K Precision Corporation |
| $0.00 |
| $0.00 |
| MCAL6A |
| Electronic Caliper |
| Blue Point |
| $0.00 |
| $0.00 |
| MT574C |
| Digital Multimeter |
| Blue Point |
| $0.00 |
| $0.00 |
| PMF147A |
| Dial Caliper |
| Blue Point |
| $0.00 |
| $0.00 |
| TIF160 |
| Tire Inflator Gauge |
| Blue Point |
| $0.00 |
| $0.00 |
| TPGD150 |
| Digital Tire Pressure Gauge |
| Blue Point |
| $0.00 |
| $0.00 |
| MEX5 Series |
| Pressure Gauge (Dry) |
| Bourdon |
| $0.00 |
| $0.00 |
| 23-1990 |
| Propeller Protractor |
| Brown & Sharpe |
| $0.00 |
| $0.00 |
| 6420 |
| Vernier Caliper |
| Central Tools |
| $0.00 |
| $0.00 |
| 11453 |
| Dial Indicator |
| Chadwick Helmuth |
| $0.00 |
| $0.00 |
| 719-10 Series |
| Spring Scale |
| Chatillon |
| $0.00 |
| $0.00 |
| 719-40 Series |
| Spring Scale |
| Chatillon |
| $0.00 |
| $0.00 |
| DFE2-100 |
| Digital Force Gauge |
| Chatillon |
| $0.00 |
| $0.00 |
| DPP10 |
| Dial Push/Pull Gage |
| Chatillon |
| $0.00 |
| $0.00 |
| DPP16 |
| Mechanical Force Gauge |
Spring Scale
| DPP5 |
| Mechanical Force Gauge |
Spring Scale
| DPPH100 |
| Dial Push/Pull Gauge |
| Chatillon |
| $0.00 |
| $0.00 |
| IN-100 |
| Straight Scale |
| Chatillon |
| $0.00 |
| $0.00 |
| LG Series |
| Mechanical Force Gauge |
| Chatillon |
| $0.00 |
| $0.00 |
| 22504 Series |
| Dial Indicator |
Plunger Style
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| 26104 Series |
| Dial Indicator GP2 |
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| 60100 Series |
| Depth Dial Indicator Kit |
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| 60100C Series |
| P135K Dial Indicator Kit |
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| 60412 Series |
| Dial Indicator |
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| P135K |
| Dial Indicator Kit |
| Chicago Dial Indicator Company |
| $0.00 |
| $0.00 |
| CASP-2000H |
| Battery Analyzer-Charger |
| Christie |
| $0.00 |
| $0.00 |
RF80-M
*On-Site calibration is REQUIRED*
| Battery Analyzer-Charger |
| Christie |
| $0.00 |
| $0.00 |
| 121971-001 |
| Battery Analyzer-Charger |
| Christie |
| $0.00 |
| $0.00 |
RF80-K or 121630-001 *On-Site calibration is REQUIRED*
| Battery Analyzer-Charger |
| Christie |
| $0.00 |
| $0.00 |
*On-Site calibration is REQUIRED*
| Digital Bench Scale |
| Doran |
| $0.00 |
| $0.00 |
| 2BA12-05 |
| Dial Indicator |
| Dorsey Gage Company |
| $0.00 |
| $0.00 |
| 2I100-05 |
| Gauge Dial Indicator |
| Dorsey Gage Company |
| $0.00 |
| $0.00 |
| LDAR-6 |
| Shallow Diameter Gage |
| Dorsey Gage Company |
| $0.00 |
| $0.00 |
| Kit Part Number TS-4058/U (Includes P/N: ADTS405189121M0) |
| ADTS405-8325 |
Pressure Test Set and Hand Terminal
| Druck Incorporated |
| $0.00 |
| $0.00 |
| Kit Part Number DPI 705 Series or TM1609G001 (Includes P/N: PDCR2200 Series) |
| Digital Pressure Gauge |
and Pressure Transducer
| Druck Incorporated |
| $0.00 |
| $0.00 |
| 42A12A |
| Ultrasonic Test Set / Pinger Sonar Test Set |
| Dukane Corporation |
| $0.00 |
| $0.00 |
| TS200 or 630-762-4050 |
| TS200 Ultrasonic Test Set |
| Dukane Seacom, Inc. |
| $0.00 |
| $0.00 |
| 380360 |
| Insulation Tester |
| Extech |
| $0.00 |
| $0.00 |
| 380580 |
| Digital MilliOhm Meter |
| Extech |
| $0.00 |
| $0.00 |
| RH300 |
| Digital Psychrometer |
| Extech |
| $0.00 |
| $0.00 |
| 177 |
| Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 179 |
| Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 715 |
| Volt/mA Calibrator |
| Fluke |
| $0.00 |
| $0.00 |
| 1507 |
| Insulation Tester |
| Fluke |
| $0.00 |
| $0.00 |
| 1520 |
| Megohmmeter (Digital) |
| Fluke |
| $0.00 |
| $0.00 |
| 190-202 |
| ScopeMeter 2 ChanneL |
| Fluke |
| $0.00 |
| $0.00 |
| 27/FM |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 51SeriesII |
| Thermocouple Thermometer |
| Fluke |
| $0.00 |
| $0.00 |
| 73SeriesIII |
| Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 77AN |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 77BN |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 77SeriesIII |
| Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 77SeriesIV |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 8010A |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 8012A |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 8050A |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 8060A |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 80i-KW |
| Current/Power Probe |
| Fluke |
| $0.00 |
| $0.00 |
| 80TK |
| Thermocouple Module |
| Fluke |
| $0.00 |
| $0.00 |
| 87 Series V |
| Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 88 V |
| Automotive Digital Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| FLUKE115 |
| True RMS Multimeter |
| Fluke |
| $0.00 |
| $0.00 |
| 52-010-006 |
| PMF133 Dial Caliper |
| Fowler |
| $0.00 |
| $0.00 |
Pro-Max Series or S225 or 54-200 Series
| Digital Caliper |
| Fowler / NSK / Pro Max |
| $0.00 |
| $0.00 |
| GTP-1174 |
| Compound Pressure Gauge |
| Gammon |
| $0.00 |
| $0.00 |
| GR15-30 |
| Pressure Gauge |
| Gentec |
| $0.00 |
| $0.00 |
| Kit Part No. SK2000FIT Includes: ZM200-DN2000-A or M200-A or M2 Series |
| Manometer |
| HABCO |
| $0.00 |
| $0.00 |
| PT300 Series or PT-300-10 |
| Wheel Load Weigher |
| Intercomp Company |
| $0.00 |
| $0.00 |
| 52-222 Series or 52-222-001 or NSK |
| Outside Micrometer |
| Japan Micrometer |
| $0.00 |
| $0.00 |
Fuel Quantity Test Set
| 70700-77669-041 |
| BIM Blades |
Checking & Filling Unit
| JQE 36-3M |
| Power Supply |
| KEPCO |
| $0.00 |
| $0.00 |
| 53210A |
| Agilent RF Counter |
| Keysight |
| $0.00 |
| $0.00 |
| 622338 |
| Visible Light Meter |
Calibration Technical Order:
33K4-4-564-1
| 622339 |
| Ultra-Violet Meter |
Calibration Technical Order:
33K4-4-759-1
| 90273 |
| Pressure Gauge (Dry) |
| Marshalltown |
| $0.00 |
| $0.00 |
| 161970 or G29036 or G Series |
| Pressure Gauge (Dry) |
| Marshalltown a/k/a Ametek |
| $0.00 |
| $0.00 |
| MIT420 |
| Insulation Tester |
| Megger |
| $0.00 |
| $0.00 |
| BBA442-35SD |
| Basic Counting Scale |
| Mettler-Toledo |
| $0.00 |
| $0.00 |
| 1063 |
| Tire Pressure Gauge Element |
Gauge Assembly Dual Chuck
| 1076 |
| Pressure Gauge (Dry) |
| Milton |
| $0.00 |
| $0.00 |
| S-936 |
| Tire Pressure Gauge |
| Milton |
| $0.00 |
| $0.00 |
| CD-8" ASX |
| Electronic Caliper |
| Mitutoyo |
| $0.00 |
| $0.00 |
| 103-260 |
| Outside Micrometer |
| Mitutoyo |
| $0.00 |
| $0.00 |
21465A81 McMaster-Carr Part No.
| PRO 360 Digital Protractor |
| Mitutoyo |
| $0.00 |
| $0.00 |
| 229-132 |
| Depth Micrometer |
| Mitutoyo |
| $0.00 |
| $0.00 |
| 2414-08 |
| Dial Indicator |
| Mitutoyo |
| $0.00 |
| $0.00 |
| 500-505-50 |
| Digimatic Caliper |
| Mitutoyo |
| $0.00 |
| $0.00 |
| 711-406 |
| Depth Micrometer |
| NSK Japan |
| $0.00 |
| $0.00 |
| CL201 |
| Portable Scale |
| Ohaus Corporation |
| $0.00 |
| $0.00 |
| CS 200 |
| Portable Scale |
| Ohaus Corporation |
| $0.00 |
| $0.00 |
| RDXL4SD |
| Thermometer |
| Omega |
| $0.00 |
| $0.00 |
| HH81 |
| Digital Thermometer |
| Omega Engineering, Inc. |
| $0.00 |
| $0.00 |
| T5-2002-104-00 |
| Cable Tensiometer |
| Pacific Scientific |
| $0.00 |
| $0.00 |
| T60-1001-C8-1A |
| Cable Tensiometer |
| Pacific Scientific Opti Manufacturing |
| $0.00 |
| $0.00 |
| T5-2002-101-00 |
| Cable Tensiometer |
| Pacific Scientific |
Opti Manufacturing
322AS155-2 or 90-900-8058 or
30003-322AS155-2
Dial Indicating Pressure Gauge (Dry)
| Perma-Cal Industries |
| $0.00 |
| $0.00 |
| PM6672OPTPM9690 |
| Timer/Counter |
| Phillips |
| $0.00 |
| $0.00 |
Battery Charger/Analyzer
| Power Products by Lamar Technologies |
| $0.00 |
| $0.00 |
| J6470 |
| Digital Torque Tool Tester |
| Proto |
| $0.00 |
| $0.00 |
| J6472 |
| Digital Torque Tool Tester |
| Proto |
| $0.00 |
| $0.00 |
| J6476 |
| Digital Torque Tool Tester |
| Proto |
| $0.00 |
| $0.00 |
| P612 or P600 Series |
| Pressure Gauge (Dry) |
| Radnor |
| $0.00 |
| $0.00 |
| 3638AS502-1 |
| Aircraft Firing Circuit Test Set |
| Raytheon |
| $0.00 |
| $0.00 |
| 7700 |
| Optical Depth Micrometer |
| Rene Corporation |
| $0.00 |
| $0.00 |
| 43230 |
| Digital Swivel Head |
Pencil-Style Thermometer
| I-012 or 49-0250-00 or GGGC105 |
| Micrometer, Inside |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 02-085 Series or 02-0851-9700 or GGGC105 NSN: 5210-00-540-2973 |
| Outside Micrometer |
Gauging Range
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 02-0851-9700 or 02-0851 Series or 02-0851-14 |
| Outside Micrometer Set |
02-0863 Series
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 02-0854-14 850 Series |
| Outside Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 04-0009-9700 |
| Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 04-0010-14 |
| Outside Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
04-0012-9700 or 04-00 Series
| Outside Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 12-0216-04 or GGGC105TypeIII |
| Depth Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 12-0246-04 |
| Depth Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 12-0256-04 |
| Depth Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| 16 0167 |
| Caliper |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| GGGC105 or 12-2014-04 or 12-0510-04 |
| Depth Micrometer Gage |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| GGGC105 Series |
| Outside Micrometer |
| Scherr-Tumico |
| $0.00 |
| $0.00 |
| PSD60-2R |
| Fuel Quantity Test Set |
| Simmonds Precision |
| $0.00 |
| $0.00 |
260 Series 8XPi or
260-8XLPM
| Volt Ohm Milliammeter |
| Simpson |
| $0.00 |
| $0.00 |
| 260-6XLPM or 260 Series |
| Volt Ohm Milliammeter |
| Simpson |
| $0.00 |
| $0.00 |
| 260-7P |
| Volt Meter |
| Simpson |
| $0.00 |
| $0.00 |
| 260-8 |
| Analog Meter, VOM |
| Simpson |
| $0.00 |
| $0.00 |
GGGC105 or
3-4INCH
| Outside Micrometer |
| Slocomb |
| $0.00 |
| $0.00 |
| CM6563470 or GA3640 |
| Dial Indicator Set |
| Snap-On |
| $0.00 |
| $0.00 |
| EEDMTACH1 |
| Digital Tachometer |
| Snap-On |
| $0.00 |
| $0.00 |
| QC Series |
| Torque Wrench Body |
| Snap-On |
| $0.00 |
| $0.00 |
| QD Series |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| QJ Series |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| QTR2100 |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| QTS135 |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| TE Seriies |
| Torqometer |
| Snap-On |
| $0.00 |
| $0.00 |
| TQF250 |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| TQFR Series |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| TQR600B |
| Torque Wrench |
| Snap-On |
| $0.00 |
| $0.00 |
| TQS1FU or TQS Series |
| Torqometer |
| Snap-On |
| $0.00 |
| $0.00 |
| TQS1FUA PMEL Part No. TQSS1FUA |
| Torqometer |
| Snap-On |
| $0.00 |
| $0.00 |
| Kit Part Number DSE-2000A (Includes P/N: DIX-365A, DIX-555A, DSE-100X) |
| UV-A Sensor, Visible Light Sensor, Digital Radiometer/Photometer |
| Spectroline Spectronics Corporation |
| $0.00 |
| $0.00 |
| Kit Part Number AccuMAX XRP-3000 (Includes P/N: XDS-1000, XR-1000) |
| Dual UV-A / VIS Sensor Detector |
and Readout Unit
| Spectronics Corporation |
| $0.00 |
| $0.00 |
| 123 |
| Vernier Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| Kit Part Number S759BZ (Includes P/N: 721, 734) |
| Electronic Digital Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 1202 |
| Dial Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| Kit Part Number S766AZ (Includes P/N 3732, EC799A-6/150) |
| Kit Includes Electronic Digital Micrometer and Caliper |
| Starrett |
| $0.00 |
| $0.00 |
1202 Series or 1202-6
| Dial Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 1202-6 |
| Dial Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 120A |
| Dial Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 123 Series or 123E&M |
| Vernier Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 124 Series |
| Mircrometer, Inside |
| Starrett |
| $0.00 |
| $0.00 |
3202 Series or 3202-6
| Dial Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 443 Series |
| Depth Gage Micrometer |
| Starrett |
| $0.00 |
| $0.00 |
| 450 Series |
| Venier Depth Gauge |
| Starrett |
| $0.00 |
| $0.00 |
| 463RL or 463 Series |
| Micrometer Head |
| Starrett |
| $0.00 |
| $0.00 |
| 576 Series or 576R |
| Outside Micrometer |
| Starrett |
| $0.00 |
| $0.00 |
| 643 Series or STR643J |
| Depth Dial Gauge |
Knife Edge Base
| 655-441 |
| Dial Indicator |
| Starrett |
| $0.00 |
| $0.00 |
| 721 Series |
| Electronic Digital Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| 797B Series or 797B-6/150 |
| Electronic IP65 |
Water Resistant Digital Caliper
| 798 Series |
| Digital Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| EC799A-6/150 |
| Electronic Digital Caliper |
| Starrett |
| $0.00 |
| $0.00 |
| Kit Part Number S436.1CXRLZ (Includes P/N: 436-1, 436-2, 436-3, 436-4, 436-5, 436-6 OR 436.1XRL-1, 436.1XRL-2, 436.1XRL-3, 436.1XRL-4, 436.1XRL-5, 436.1XRL-6) |
| Outside Micrometer Set |
Set of six in wood box
S78DZ
(Includes P/N: 78Z-500, 78Z-625, 78Z-750) *Requires Dedicated 68-Degree Room for Calibration* Internal Micrometer Set 3 Bore Gages and 2 Setting Rings
S78EZ
(Includes P/N: 78Z-138, 78Z-2, 78Z-1) *Requires Dedicated 68-Degree Room for Calibration*
| Internal Micrometer Set |
| Starrett |
| $0.00 |
| $0.00 |
S78FZ
(Includes P/N: 78Z-3, 78Z-4) *Requires Dedicated 68-Degree Room Calibration*
| Internal Micrometer Set (Contains Bore Gauges and Setting Rings) |
| Starrett |
| $0.00 |
| $0.00 |
S78XTDZ
*Requires Dedicated 68-Degree Room Calibration*
EDP68154
Internal Micrometer Set
| 12-384-4 |
| Digital Depth Micrometer |
| Swiss Precision Instruments |
| $0.00 |
| $0.00 |
Comm/Nav Test Set
| Tel-Instrument Electronics Corporation |
| $0.00 |
| $0.00 |
| 90-000-095 |
| TIC Transponder Set |
AN/APM-480A
(IFF & TCAS Test Set)
| Tel-Instrument Electronics Corporation |
| $0.00 |
| $0.00 |
| HC-1783 |
| Strut Servicing Kit |
(Pressure Gauge)
161970 or G29036 or G Series
| Pressure Gauge (Dry) |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| 1900 Series |
| Pressure Gauge |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| 555L or Series 550 |
| Pressure Gauge |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| BU-2581-AM or P600 SERIES |
| Pressure Gauge (Dry) |
| U. S. Gauge |
| $0.00 |
| $0.00 |
P1535 or 1500 Series
| Pressure Gauge (Dry) |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| P601 or 160905 or BU2581AQ |
| Pressure Gauge (Dry) |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| P844 Series or P844UK |
| Pressure Gauge (Dry) |
| U. S. Gauge |
| $0.00 |
| $0.00 |
| H-1653 |
| Counting Scale |
| Uline |
| $0.00 |
| $0.00 |
P-733 or P-733 Series or 161970
| Pressure Gauge (Dry) |
| USG |
| $0.00 |
| $0.00 |
| 199 |
| Propeller Protractor |
| Warren-Knight |
| $0.00 |
| $0.00 |
| 111.11 Series or 111.11.53 |
| Pressure Gauge (Dry) |
| Wika |
| $0.00 |
| $0.00 |
| 232 Series |
| Pressure Gauge (Dry) |
| Wika |
| $0.00 |
| $0.00 |
Base Security: At a minimum, all company drivers shall possess a valid driver’s license and insurance/registration for the vehicle they are driving. The driver shall be easily identifiable by vehicle decal and/or uniform and be able to provide proper documentation regarding their business affiliation if requested. Due to COVID-19, technician shall maintain 6-feet social distancing on base. Technician is to wear a mask on base at any time indoors and for all close-contact interactions.
| Points of Contact: | Becky Hissom | |
| | Aviation Training Center Mobile |
Aviation Engineering Support Hangar 2, Tool Room
| Office Telephone: 251-441-6885 |
| Email: Becky.L.Hissom@uscg.mil |
Joseph Rohrer Aviation Training Center Mobile Aviation Engineering Support Aviation Material Office (AMO) Office Telephone: 251-441-6487
Email: Joseph.P.Rohrer@uscg.mil ATC MOBILE AVIATION CALIBRATION | FY-2022 Scope of Work
Base DiagramDrop Off & Pick Up and On-Site Calibration Location at SouthWest (runway) end of Hangar 2 Main Entrance to ATC image1.png