RFQ_SB1341-17-RQ-0159.pdf

RFQ IFB RFP

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODEFACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF.

DATE . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

OFFER

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

17a CONTRACTOR/

OFFEROR.

CODE

8 (A)

SIZE STANDARD:

NAICS:

% FOR:SET ASIDE:UNRESTRICTED OR

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

10. THIS ACQUISITION IS

EDWOSB

SMALL BUSINESS PROGRAM

STANDARD FORM 1449 (REV. 2/2012) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

SCHEDULE Continued

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

PAGE 3 OF 43 SB1341-17-RQ-0159

0001 Cryogen-free dilution refrigerator system with the following characteristics and features (A-D)

A. The dry dilution refrigerator system meets all attached specification.

B. Professional layout and installation of the system at NIST at the Boulder, Colorado location shall be included.

C. Training of end-users and NIST shall be included.

D. 3- year warranty on parts manufactured by the vendor shall be included.

PR NUMBER: NB687070-17-00642

DELIVERY DATE: 08/14/2017

SHIP TO:

NATIONAL INST OF STDS AND TECHNOLOGY

325 BROADWAY

BOULDER CO 80305-3328

FOB : Destination

1.00 LS

Table of Contents

PAGE 4 OF 43 SB1341-17-RQ-0159

SECTION

. 1 Attachment A-Solicitation Addenda

. 2 Attachment B- Specifications

. 3 Attachment C- Pricing Sheet

. 4 Attachment D- Pre-quotation/Inquiry Form

. 5 List of Attachments

. 6 NIST LOCAL-09 Clause

. 7 Special Contract Requirements

. 8 52.202-1 DEFINITIONS (NOV 2013)

. 9 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

. 10 52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF

WHISTLEBLOWER RIGHTS (APR 2014)

. 11 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER (MAY 2011)... 27

. 12 52.204-6 UNIQUE ENTITY IDENTIFIER (OCT 2016)

. 13 52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

. 14 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016)

. 15 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016)

. 16 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MANAGEMENT (JUL 2016)

. 17 52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A FELONY

CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

. 18 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2016)

. 19 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

. 20 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2016)

. 21 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAY 2015)

. 22 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

. 23 52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

. 24 52.225-8 DUTY-FREE ENTRY (OCT 2010)

. 25 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR

TRANSACTIONS RELATING TO IRAN--REPRESENTATION AND CERTIFICATIONS (OCT 2015)

. 26 52.232-13 NOTICE OF PROGRESS PAYMENTS (APR 1984)

. 27 52.232-16 PROGRESS PAYMENTS (APR 2012)

. 28 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013)

. 29 52.233-1 DISPUTES (MAY 2014)

. 30 52.233-3 PROTEST AFTER AWARD (AUG 1996)

. 31 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

. 32 52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)

. 33 52.242-13 BANKRUPTCY (JUL 1995)

. 34 52.242-15 STOP-WORK ORDER (AUG 1989)

. 35 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

. 36 52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

. 37 52.247-34 F.O.B. DESTINATION (NOV 1991)

. 38 52.247-35 F.O.B. DESTINATION, WITHIN CONSIGNEE`s PREMISES (APR 1984)

. 39 52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984)

. 40 1352.208-70 RESTRICTIONS ON PRINTING AND DUPLICATING (APR 2010)

. 41 1352.209-72 RESTRICTIONS AGAINST DISCLOSURE (APR 2010)

. 42 1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010)

. 43 1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010)

. 44 1352.228-72 DEDUCTIBLES UNDER REQUIRED INSURANCE COVERAGE- FIXED PRICE (APR 2010)

. 45 1352.237-71 SECURITY PROCESSING REQUIREMENTS - LOW RISK CONTRACTS (APR 2010)

. 46 1352.237-73 FOREIGN NATIONAL VISITOR AND GUEST ACCESS TO DEPARTMENTAL RESOURCES (APR

2010)

Table of Contents

PAGE 5 OF 43 SB1341-17-RQ-0159

. 47 1352.242-70 POSTAWARD CONFERENCE (APR 2010)

. 48 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JULY 2013)

. 49 52.211-6 BRAND NAME OR EQUAL (AUG 1999)

. 50 52.211-9 III DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997)--ALTERNATE III (APR 1984).. 32

. 51 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--

COMMERCIAL ITEMS (JAN 2017)

. 52 52.225-2 BUY AMERICAN CERTIFICATE (MAY 2014)

. 53 52.225-18 PLACE OF MANUFACTURE (MAR 2015)

. 54 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

. 55 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

. 56 1352.201-70 CONTRACTING OFFICER?s AUTHORITY (APR 2010)

. 57 1352.201-72 CONTRACTING OFFICER`S REPRESENTATIVE (COR) (APR 2010)

. 58 1352.228-70 INSURANCE COVERAGE (APR 2010)

. 59 1352.233-70 AGENCY PROTESTS (APR 2010)

. 60 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010)

. 61 1352.246-70 PLACE OF ACCEPTANCE (APR 2010)

. 62 NIST LOCAL-04 BILLING INSTRUCTIONS

. 63 NIST LOCAL-10 DELIVERY INSTRUCTIONS

. 64 NIST LOCAL-39 MARKING/PACKING INSTRUCTIONS

PAGE 6 OF 43 SB1341-17-RQ-0159

SECTION

. 1 Attachment A-Solicitation Addenda

Attachment A

52.212-1 – INSTRUCTIONS TO QUOTERS – COMMERCIAL ITEMS, SOLICITATION

ADDENDA

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449).

(b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations shall be submitted on the attached SF 1449. As a minimum, quotations must show-

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the quoter;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms; Pricing shall be submitted as requested in the Schedule of Supplies/Services comprised within the solicitation document. No price/cost information should be included in the technical quotation document.

Attachment C - Pricing Sheet shall be completed and coordinate to the overall price on the SF 1449.

(7) “Remit to” address, if different than mailing address;

(8) The Vendor must have completed Online Representations and Certifications at FAR 52.212-3 for the NAICS code and small business size standard for this acquisition which appear in Block 10 of the solicitation cover sheet (SF 1449). If the Vendor does not have online representations and certifications for the applicable NAICS code and size standard in the System for Award Management at www.sam.gov the Vendor must submit a completed copy of representations and certifications with its quotation;

(9) Acknowledgment of Solicitation Amendments;

(10) If the quotation is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, PAGE 7 OF 43 SB1341-17-RQ-0159 or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of quotation. The quoter agrees to hold the prices in its quotation firm for 90 calendar days from the date specified for receipt of quotations.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing ~ is not applicable.

(e) Multiple quotations. Quoters are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.

(f) Late submissions.

(1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due.

(2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.

(3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(g) Contract award. The Government intends to evaluate quotations and issue a purchase order based on the initial quotations received. Therefore, the quoter’s initial quotation should contain the quoter’s best terms from a price and technical standpoint. The Contracting Officer will not establish a competitive range, conduct discussions, or otherwise use the procedures described at FAR 15.306. The Government may reject any or all quotations if such action is in the public interest, and may waive informalities and minor irregularities in quotations received.

PAGE 8 OF 43 SB1341-17-RQ-0159

(h) Multiple awards. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations.

Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation. ~ is not applicable.

(i) Availability of requirements documents cited in the solicitation.

(1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-

GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

PAGE 9 OF 43 SB1341-17-RQ-0159

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding $3,500, and quotations of $3,500 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the quoter’s name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of a quotation, the quoter acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Quoter. Quoters may obtain information on registration and annual confirmation requirements via the SAM database accessed throughhttps://www.acquisition.gov.

(l) Requests for information. The contracting officer does not intend to notify unsuccessful quoters that responded to this solicitation, but may choose too. Quoters may request information on award(s) resulting from this solicitation from the contracting officer. If requested, the following information will be provided by the contracting officer.

(1) The number of quoters solicited;

(2) The number of quotations received;

(3) The name and address of each quoter receiving an award;

(4) The items, quantities, and any stated unit prices of each award. If the number of items or other factors makes listing any stated unit prices impracticable at that time, only the total contract price need be furnished in the notice; and

(5) In general terms, the reason(s) the Contractor’s quotation was not accepted, unless the price information in paragraph (4) of this section readily reveals the reason. In

PAGE 10 OF 43 SB1341-17-RQ-0159

no event will a quoter’s cost breakdown, profit, overhead rates, trade secrets, manufacturing processes and techniques, or other confidential business information be disclosed to any other quoter.

1. CONTINUATION OF INSTRUCTIONS TO QUOTERS FOR SB1341-17-RQ-0159

In addition to the guidance included in FAR 52.212-1 entitled “Instructions to Quoters – Commercial Items,” the following are applicable for the preparation and submission of quotations. In addition, the following paragraphs, with respect to the information and documents required for submission, is hereby amended in response to this solicitation:

1.1. Questions

Questions relating to this RFQ shall be submitted via e-mail only to angela.hitt@nist.gov not later than Noon (MT) on February 23, 2017. No questions will be accepted after this time and date. The vendor shall reference the RFQ number SB1341-17-RQ-0159 and the project titled Dilution Refrigerator System. The Government does not intend to respond to questions submitted after the cutoff date. The Government will collect all questions, incorporate responses and distribute to all Contractors through amendment to this solicitation in the FedBizOpps System.

1.2. Submission of Quotations

Quotations shall be submitted electronically via email to angela.hitt@nist.gov and to dennis.fuentes@nist.gov. Quotations shall conform to the instructions contained in the clause at FAR 52.212-1 and this addenda, in accordance with the requirements of the solicitation. Significant deviation may result in the possible exclusion of such quotations from further consideration.

Quotations are due no later than the specified due date identified in block 8 of the RFQ

SF 1449.

Quotations shall contain the following parts:

Part I – Technical Factors:

Factor 1 (Technical Factor) – Required Technical Specifications

Part II – Price Quotation

1.3. Electronic Submission

1.3.1. General

PAGE 11 OF 43 SB1341-17-RQ-0159

All original quotation materials shall be submitted in accordance with requirements in this section. The quotation shall be presented in the order detailed in this section and as required elsewhere in the solicitation. The quotation and its page limitations to this solicitation shall be submitted electronically via e-mail only to angela.hitt@nist.gov and to dennis.fuentes@nist.gov in accordance with the requirements of the solicitation.

The information will be used by the Government to evaluate each quotation.

Quotations should provide more than superficial coverage of the information required by the evaluation factors identified herein. Additionally, should the quotation include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the quotation may be determined ineligible for award.

The Government shall not be liable for any costs incurred by the Vendor submitting a quotation in response to this Solicitation.

Failure to submit a complete quotation shall result in the quotation being deemed technically unacceptable.

1.3.2. Text

Text shall be at least single spaced, on 8 ½” x 11” inch paper, with a minimum one-inch margin all around, and when necessary single sided, single spaced.

Pages shall be numbered consecutively.

1.3.3. Font Size

Print shall be of a minimum 11-point font size. Bolding, underlining, and italics may be used to identify topic demarcations or points of emphasis. Graphic presentations, including tables, while not subject to the same font size and spacing requirements, shall have spacing and text that is easily readable.

1.3.4. Page Limitation

See Submittal Requirements for each Factor regarding page limitation. Quotation content that exceeds the stated page limitations will be removed from the quotation by the Contracting Officer before the quotation is turned over to the Government evaluation team and will not be considered in the evaluation.

1.4. List of Attachments

Attachment A – Solicitation Addenda -- Instructions, Evaluation Criteria and Basis for

PAGE 12 OF 43 SB1341-17-RQ-0159

Award Attachment B – Specifications Attachment C – Price Sheet Attachment D – Pre-quotation Question/Inquiry Form (Attached to this RFQ as both

PDF in the RFQ package and separetly as an MS Excel document for ease of responding to this RFQ)

2. EVALUATION CRITERIA AND BASIS FOR AWARD

The Government will award a firm fixed price purchase order on the basis of the lowest evaluated price of the quotations meeting or exceeding the acceptability standards for technical and non-price factors which represent an overall best value to the Government.

Technical and Non-Price factors will be rated on an “Acceptable/Unacceptable” basis. Failure to meet any of the requirements will result in an “Unacceptable” rating and eliminate the quoter from further consideration for award.

Technical quotations shall be evaluated against the evaluation factors listed in the RFQ.

The technical and non-price factors are as follows:

2.1. Factor 1 - Dry Dilution Refrigerator System

Submittal Requirements – (10-page limit)

Contractors shall submit a Device that is a Bluefors Cryogenics Oy Ltd LD-250 or be technically equivalent cryostat to successfully fulfill the technical requirements of the Specifications and identified in this RFQ.

At a minimum, The Device must be a Bluefors Cryogenics Oy Ltd LD-250 or be a technically equivalent cryostat. The following is a list of required features:

A. Physical

- Stand-alone operation, i.e., no excess equipment such as additional vacuum pumps shall be needed to operate the Device.

- The supporting structure such as the floor mount must be included.

- Extensive vibration isolation including a remote rack-mounted turbo pump with bellows and pulse tube bellows damping stage. Horizontal and vertical mechanical vibrations at the base flange (due to the pulse tubes) shall be characterized by the vendor and be less than 10 micro meter average displacement for all low frequencies (< 500 Hz).

- Mixing chamber plate with diameter of 29 cm or more.

PAGE 13 OF 43 SB1341-17-RQ-0159

- Radiation and magnetic shielding shall be included:

1. A tin-plated Cu radiation shield shall be included to protect devices at the base temperature stage from thermal radiation and ambient flux noise

2. An additional magnetic shield shall be included to protect devices at the base temperature stage from ambient flux noise.

An integrated thermal link between 50 K stage and the still-stage for the purpose of speeding-up the final part of the cool-down shall be included.

B. Performance of the refrigerator

- Cryogen-free operation, i.e., pulse tube cooler is used instead of liquid helium to cool down to 4 K.

- Guaranteed base temperature of 10 mK or below.

- Cool-down time of less than 24 h.

- Cooling power of at least 40 W at 45 K, at least 1.5 W at 4.2 K, and at least 300 microwatts at 100 mK.

C. Vacuum system

- No membrane pump shall be used in the 3He—4He mixture circulation since they have short service periods and the rupture of the membrane leads potentially to loss or contamination of the mixture.

The dilution unit shall not have any soft solders. Soft-solders are known to develop micro-fractures and cold leaks overtime.

D. Operation

- Heat-exchange-gas-free operation, i.e., the Device shall have only a single vacuum feedthrough stage at room temperature, which implies that no heat exchange gas can be used in the large vacuum can.

- Fully automated operation with computer-controlled valves and pumps.

- Press-of-a-button cool-down possibility.

- Possibility to control the Device with user-written software (e.g. Python, LabView and MATLAB) running on an additional user-supplied computer.

- A panel with the possibility to override the automation and to fully control the

Device manually.

E. Supplies

The following accessories must be supplied by the vendor:

- Temperature measurement and control equipment including thermometers and a high-level resistance bridge with a PID controller such as Lakeshore 372S/AC. The resulting temperature stability at the mixing chamber plate must

PAGE 14 OF 43 SB1341-17-RQ-0159

be accurate on the sub-millikelvin level below 100 mK. Thermometers at all plates at different low temperatures must be included.

- Seven or more line-of-sight ports at least 40 mm in diameter.

- A warm-up heater, installed, for faster warm-up of the refrigerator. The warm-up heater must include at least one heating element on the 4 K plate and a programmable power supply. The refrigerator must warm up in 13 hours or less using the warm-up heater.

F. Experimental and Technical Wiring

- Experimental wiring of 12 or more single Thermocoax lines (e.g. type 1 Nc Ac,

0.5 mm OD) including installation and thermalization from room temperature to base temperature, and a break-out box with an SMA connector for each wire at room temperature and a breakout with an SMA connector for each wire at base temperature.

- Experimental wiring of 12 or more phosphor-bronze twisted pairs including installation and thermalization from room temperature to base temperature, and break-out box with a standard connector for each wire at room temperature and a standard connector for each wire at base temperature.

Experimental wiring of 12 or more Cu + NbTi/CuNi low-ohmic superconducting twisted pairs including installation and thermalization from room temperature to base temperature, and a break-out box with a standard connector for each wire at room temperature and base temperature.

Experimental wiring of 12 or more twisted pairs (e.g. 35 AWG Cu) from room temperature to the 4 K stage. This set of wires shall include anchoring to the pulse tube and standard connectors at room temperature and 4 K. The purpose of these lines is to power user-supplied commercial low noise microwave amplifiers operated at the 4 K stage.

- Microwave experimental wiring of twelve (12) or more “SMA” lines shall be supplied and installed. The lines shall be designed to operate up to 18 GHz or higher frequency and be fitted with SMA connectors and thermal anchoring at multiple stages.

1. Nine (9) of the SMA lines shall be supplied and installed for the purpose of sending microwave signals to electrical devices at the base temperature stage. These lines should be equipped with appropriate levels of cryogenic attenuation for blocking 300 K radiation and reducing the noise temperature of input signals. For example, the following attenuation scheme is appropriate: 50 K (0 dB), 4 K (20 dB), Still 1 K (10 dB), Cold Plate 0.1 K (20 dB), mixing-chamber 0.01 K (20 dB).

2. Three (3) of the SMA lines shall be supplied and installed for the purpose of measuring signals originating from the base temperature stage. On these lines, a minimal amount of attenuation should be present, with no attenuation between 4 K and the base temperature stage.

PAGE 15 OF 43 SB1341-17-RQ-0159

- Microwave experimental wiring of one (1) or more “SMK” lines with K-2.92 mm connectors and thermal anchoring for frequencies up to 40 GHz or higher from room temperature to base temperature including installation. Coaxial cables equipped with cryogenic attenuation at all stages shall be included with a scheme similar to: 50 K (0 dB), 4 K (20 dB), Still 1 K (10 dB), Cold Plate 0.1 K (20 dB), MXC 0.01 K (20 dB).

- A pair of current leads (rated to 100 amperes or more) including installation going from a room temperature feedthrough to electrical connectors at the 4 K plate. The purpose of these leads is to power a user-supplied (and user-installed) superconducting solenoid magnet that operates at the base temperature.

G. Documentation

Full technical documentation and user manuals in English must be included as pdf-files and in printed format.

2.1.2 Description of services, warranty and after sales support

A. Factory testing

Factory tests with the full provided system must be carried out before delivery and installation. The optimization of the helium mixture and the operation of the automated cool-down must be included and carried out in this configuration.

B. Training

Training on site for 2 days immediately after accepted installation.

C. Warranty

Warranty period of at least three years for the components manufactured by the supplier and for the installation of third-party components. One-year or longer warranty for other components. Warranty shall cover all labour, travel, parts, and other costs required for maintaining the guaranteed performance of the device.

Warranty will take effect on the day of final acceptance. In case of warranty repair, the service shall begin no later than three business days from the moment the customer notifies the supplier.

2.1.3 Installation location

A. Physical characteristics of the installation location

- The Device will be installed in a laboratory space that is not electrically shielded.

PAGE 16 OF 43 SB1341-17-RQ-0159

- Space for pumps and gas handling systems is immediately nearby.

- The installation location is situated on the ground floor of the building.

- The installation site can be examined by the supplier beforehand.

Requirements for the site must be supplied at least 3 months beforehand. The supplier must check before signing the contract that the installation location fully corresponds to the requirements (electromagnetic noise, vibration level, etc.).

2.1.4 Available supplies at the installation location

- Standard USA 60 Hz, 110 V / 220 V electric power and 200/230VAC, 3 Phase, 60 Hz electric power available in the laboratory.

- Cooling water is available at the installation location.

- Building-wide pressurized air is available at the installation location.

DELIVERABLE SCHEDULE: Within 6 months of receipt of order (ARO).

TECHNICAL CAPABILITY:

Evaluation of Technical Capability will be based on the information provided in the quotation.

Documentation submitted in the quotation shall be evaluated to determine that the proposed equipment meets or exceeds the Governments minimum required specifications. Failure to clearly and unambiguously demonstrate this will result in an “unacceptable“ technical rating.

Basis of Evaluation

The information submitted for this factor will be subjectively evaluated to determine technical acceptability. The standard for technical acceptability is met when the Contractor clearly and unambiguously presents Bluefors Cryogenics Oy Ltd LD-250 or be a technically equivalent cryostat that:

a) Meets all stated minimum requirements of the Specifications and the RFQ to include Factory testing, training, warranty and installation.

b) Meets the Deliverable Schedule: Within 6 month of ARO

2.2. Price Quotation

Submittal Requirements

Contractor’s shall submit a firm fixed price (FFP) quotation on the SF 1449. The SF 1449 price schedule shall include the summary total firm fixed prices for CLIN 0001.

The SF1449 Summary Price Schedule shall be derived from the Attachment C – Pricing Sheet.

PAGE 17 OF 43 SB1341-17-RQ-0159

Additionally, Contractors are required to complete Attachment C - Pricing Sheet.

Basis of Evaluation

The Government will evaluate the price quotation for fairness, reasonableness and realism in relation to the technical solution by using price analysis techniques.

Price analysis will be conducted in accordance with the FAR Part 13 and Commerce Acquisition Manual. The analysis may include information from a Government auditing agency, Government technical personnel, or other sources. If a price is disproportionally lower than other competitive prices or significantly unbalanced, the price may be deemed unrealistic or unreasonable. A determination will be made by the Contracting Officer based upon the information provided. The Government reserves the right to ask for any additional price related information from the Contractor in order to determine a price fair and reasonable.

The firm fixed price purchase order will be issued to the responsible Contractor whose technically acceptable quotation is deemed to represent the lowest price.

PAGE 18 OF 43 SB1341-17-RQ-0159

. 2 Attachment B- Specifications

Attachment B

SPECIFICATIONS

Brand Name or Equal

Dry Dilution Refrigerator System

PURPOSE:

The system National Institute of Standards and Technology (NIST) seeks to procure is a dry dilution refrigerator that will be used to characterize Nano electronic devices at cryogenic temperatures and microwave frequencies. Specifically, it will be used to investigate superconducting quantum bits, ultrasensitive microwave detectors, and superconducting amplifiers. For these studies, NIST requires a multi-stage vacuum cryostat with a base temperature stage that reaches 10 mK and experimental electrical wiring going from 300 K to the base temperature stage.

TECHNICAL SPECIFICATIONS OF THE DEVICE:

The Device must be a Bluefors Cryogenics Oy Ltd LD-250 or be a technically equivalent cryostat. The following is a list of required features:

1.1 Physical

- Stand-alone operation, i.e., no excess equipment such as additional vacuum pumps shall be needed to operate the Device.

- The supporting structure such as the floor mount must be included.

- Extensive vibration isolation including a remote rack-mounted turbo pump with bellows and pulse tube bellows damping stage. Horizontal and vertical mechanical vibrations at the base flange (due to the pulse tubes) shall be characterized by the vendor and be less than 10 micro meter average displacement for all low frequencies (< 500 Hz).

- Mixing chamber plate with diameter of 29 cm or more.

- Radiation and magnetic shielding shall be included:

A tin-plated Cu radiation shield shall be included to protect devices at the base temperature stage from thermal radiation and ambient flux noise

An additional magnetic shield shall be included to protect devices at the base temperature stage from ambient flux noise.

- An integrated thermal link between 50 K stage and the still-stage for the purpose of speeding-up the final part of the cool-down shall be included.

1.2 Performance of the refrigerator

- Cryogen-free operation, i.e., pulse tube cooler is used instead of liquid helium to cool down to 4 K.

- Guaranteed base temperature of 10 mK or below.

PAGE 19 OF 43 SB1341-17-RQ-0159

- Cool-down time of less than 24 h.

- Cooling power of at least 40 W at 45 K, at least 1.5 W at 4.2 K, and at least 300 microwatts at 100 mK.

1.3 Vacuum system

- No membrane pump shall be used in the 3He—4He mixture circulation since they have short service periods and the rupture of the membrane leads potentially to loss or contamination of the mixture.

- The dilution unit shall not have any soft solders. Soft-solders are known to develop micro-fractures and cold leaks overtime.

1.4 Operation

- Heat-exchange-gas-free operation, i.e., the Device shall have only a single vacuum feedthrough stage at room temperature, which implies that no heat exchange gas can be used in the large vacuum can.

- Fully automated operation with computer-controlled valves and pumps.

- Press-of-a-button cool-down possibility.

- Possibility to control the Device with user-written software (e.g. Python, LabView and

MATLAB) running on an additional user-supplied computer.

- A panel with the possibility to override the automation and to fully control the Device manually.

1.5 Supplies

The following accessories must be supplied by the vendor:

- Temperature measurement and control equipment including thermometers and a high-level resistance bridge with a PID controller such as Lakeshore 372S/AC. The resulting temperature stability at the mixing chamber plate must be accurate on the sub-millikelvin level below 100 mK. Thermometers at all plates at different low temperatures must be included.

- Seven or more line-of-sight ports at least 40 mm in diameter.

- A warm-up heater, installed, for faster warm-up of the refrigerator. The warm-up heater must include at least one heating element on the 4 K plate and a programmable power supply. The refrigerator must warm up in 13 hours or less using the warm-up heater.

1.6 Experimental and Technical Wiring

- Experimental wiring of 12 or more single Thermocoax lines (e.g. type 1 Nc Ac, 0.5 mm OD) including installation and thermalization from room temperature to base temperature, and a break-out box with an SMA connector for each wire at room temperature and a breakout with an SMA connector for each wire at base temperature.

- Experimental wiring of 12 or more phosphor-bronze twisted pairs including installation and thermalization from room temperature to base temperature, and break-out box

PAGE 20 OF 43 SB1341-17-RQ-0159

with a standard connector for each wire at room temperature and a standard connector for each wire at base temperature.

- Experimental wiring of 12 or more Cu + NbTi/CuNi low-ohmic superconducting twisted pairs including installation and thermalization from room temperature to base temperature, and a break-out box with a standard connector for each wire at room temperature and base temperature.

- Experimental wiring of 12 or more twisted pairs (e.g. 35 AWG Cu) from room temperature to the 4 K stage. This set of wires shall include anchoring to the pulse tube and standard connectors at room temperature and 4 K. The purpose of these lines is to power user-supplied commercial low noise microwave amplifiers operated at the 4 K stage.

- Microwave experimental wiring of twelve (12) or more “SMA” lines shall be supplied and installed. The lines shall be designed to operate up to 18 GHz or higher frequency and be fitted with SMA connectors and thermal anchoring at multiple stages.

Nine (9) of the SMA lines shall be supplied and installed for the purpose of sending microwave signals to electrical devices at the base temperature stage. These lines should be equipped with appropriate levels of cryogenic attenuation for blocking 300 K radiation and reducing the noise temperature of input signals. For example, the following attenuation scheme is appropriate: 50 K (0 dB), 4 K (20 dB), Still 1 K (10 dB), Cold Plate

0.1 K (20 dB), mixing-chamber 0.01 K (20 dB).

Three (3) of the SMA lines shall be supplied and installed for the purpose of measuring signals originating from the base temperature stage. On these lines, a minimal amount of attenuation should be present, with no attenuation between 4 K and the base temperature stage.

- Microwave experimental wiring of one (1) or more “SMK” lines with K-2.92 mm connectors and thermal anchoring for frequencies up to 40 GHz or higher from room temperature to base temperature including installation. Coaxial cables equipped with cryogenic attenuation at all stages shall be included with a scheme similar to: 50 K (0 dB), 4 K (20 dB), Still 1 K (10 dB), Cold Plate 0.1 K (20 dB), MXC 0.01 K (20 dB).

- A pair of current leads (rated to 100 amperes or more) including installation going from a room temperature feedthrough to electrical connectors at the 4 K plate. The purpose of these leads is to power a user-supplied (and user-installed) superconducting solenoid magnet that operates at the base temperature.

1.7 Documentation

Full technical documentation and user manuals in English must be included as pdf-files and in printed format.

2 Description of services, warranty and after sales support

2.1 Factory testing

Factory tests with the full provided system must be carried out before delivery and installation. The optimization of the helium mixture and the operation of the automated cool-down must be included and carried out in this configuration.

PAGE 21 OF 43 SB1341-17-RQ-0159

2.2 Training

Training on site for 2 days immediately after accepted installation.

2.3 Warranty

Warranty period of at least three years for the components manufactured by the supplier and for the installation of third-party components. One-year or longer warranty for other components. Warranty shall cover all labour, travel, parts, and other costs required for maintaining the guaranteed performance of the device. Warranty will take effect on the day of final acceptance. In case of warranty repair, the service shall begin no later than three business days from the moment the customer notifies the supplier.

3 Installation location

3.1 Physical characteristics of the installation location

- The Device will be installed in a laboratory space that is not electrically shielded.

- Space for pumps and gas handling systems is immediately nearby.

- The installation location is situated on the ground floor of the building.

- The installation site can be examined by the supplier beforehand. Requirements for the site must be supplied at least 3 months beforehand. The supplier must check before signing the contract that the installation location fully corresponds to the requirements (electromagnetic noise, vibration level, etc.).

3.2 Available supplies at the installation location

- Standard USA 60 Hz, 110 V / 220 V electric power and 200/230VAC, 3 Phase, 60 Hz electric power available in the laboratory.

- Cooling water is available at the installation location.

- Building-wide pressurized air is available at the installation location.

DELIVERABLE SCHEDULE: Within 6 months after receipt of order (ARO).

PAGE 22 OF 43 SB1341-17-RQ-0159

. 3 Attachment C- Pricing Sheet

Request For Quote SB1341-17-RQ-0159 Dry Dilution Refrigerator System

Attachment C- Pricing Sheet

NOTE TO OFFERORS - Please complete this template to provide your response

Instructions: Please provide prices as listed in accordance with Attachment D, Specifications

Within 6 months after receipt of order (ARO) CLIN Description Unit Unit Price 0001 A. Dry Dilution Refrigerator System that meets all of the Specifications. Each $

Description Unit Unit Price

B. Professional layout and installation of the system at NIST Boulder, CO. Each $

Description Unit Unit Price

C. Training of end-users and NIST shall be included. Each $

Description Unit Unit Price

D. 3- year warranty on parts manufactured by the vendor shall be included. Each $ Break out of 3-year warranty:

Period of Performance: End of Award Date through an entire year Description Unit Unit Price

Warranty extension and maintenance agreement for one (1) year Each $

Period of Performance: Warranty one end date through an entire one (1) year Description Unit Unit Price

Warranty extension and maintenance agreement for two (2) years Each $

Period of Performance: Warranty two end date through an entire one (1) year Description Unit Unit Price

Warranty extension and maintenance agreement for three (3) years Each $

PAGE 23 OF 43 SB1341-17-RQ-0159

. 4 Attachment D- Pre-quotation/Inquiry Form

Attachment D - RFQ Question/Inquiry Submittal Form

REFERENCE

QUESTION GOVERNMENT RESPONSEPage Section Para.

Question

No.

RFP

Attachment

No.

PAGE 24 OF 43 SB1341-17-RQ-0159

. 5 List of Attachments

LIST OF ATTACHMENTS

RFQ SB1341-17-RQ-0159

1. Attachment A – Solicitation Addenda, Instructions, Evaluation Criteria & Basis for Award

2. Attachment B – Specifications

3. Attachment C – Pricing Sheet

4. Attachment D – Pre-quotation Question/Inquiry Form (Attached to this RFQ as both PDF in the

RFQ package and separately as an MS Excel document for ease of responding to this RFQ)

PAGE 25 OF 43 SB1341-17-RQ-0159

. 6 NIST LOCAL-09 Clause

Ship to:

National Institute of Standards and Technology Shipping and Receiving 325 Broadway Boulder, CO 80305 c/o Laing International Customs Broker Dulles International Airport (IAD) Washington, D.C. 20166-9547 USA

(END OF CLAUSE)

PAGE 26 OF 43 SB1341-17-RQ-0159

. 7 Special Contract Requirements

Special Contract Requirements

1. Performance Evaluation

Contractor performance evaluations are prepared and completed in – Contractor Performance

Assessment Report System (CPARS). They are placed in the Federal Government’s Past

Performance Information Retrieval System (PPIRS) for use by the Government when considering contractors for award of new contracts.

The contractor’s performance will be evaluated using the respective contractor performance evaluation report entry system located on the website https://www.cpars.gov/. Prior to commencement of work, the contractor is required to provide the Government with the name, phone number and e-mail address of the “Contractor’s Representative” that will be responsible for receipt and review of draft performance evaluations prepared by the government. It is the contractor’s responsibility to keep this contact information current.

2. Special Invoice Instructions

Invoices shall be submitted in a timely manner. Invoices shall be in accordance with the price schedule (CLINs) and other payment terms identified in this contract. Any invoice that includes travel expenses shall include a detailed breakdown of the travel costs and shall be accompanied with sufficient supporting documentation to easily verify all cost incurred are in accordance with the Federal Travel Regulations (FTR) and FAR Part 31.

Invoices that do not meet the minimum requirements will be rejected.

Rejected Invoices: When resubmitting a previously rejected invoice for payment the invoice date shall be revised to reflect the date for the revised invoice. Additionally, the invoice number shall be revised to include an "R" after the original invoice number or include a different invoice number to prevent submission of an apparent duplicate invoice. NIST will not accept duplicate invoices. Duplicate invoicing may result in rejection of the invoice or delay of payment.

Repeated failure to submit proper invoices following the instructions of this clause or NIST LOCAL-04 or failure to submit invoices in a timely manner may be documented in the Contractor Performance Assessment Rating.

Payment will be made for proper invoices after inspection by the appropriate Government personnel and only upon acceptance by the Government.

PAGE 27 OF 43 SB1341-17-RQ-0159

. 8 52.202-1 DEFINITIONS (NOV 2013)

(Reference 52.202-1)

. 9 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(Reference 52.203-6)

. 10 52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF

WHISTLEBLOWER RIGHTS (APR 2014)

(Reference 52.203-17)

. 11 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER (MAY 2011)

(Reference 52.204-4)

. 12 52.204-6 UNIQUE ENTITY IDENTIFIER (OCT 2016)

(Reference 52.204-6)

. 13 52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

(Reference 52.204-7)

. 14 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016)

(Reference 52.204-13)

. 15 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016)

(Reference 52.204-16)

. 16 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MANAGEMENT (JUL 2016)

(Reference 52.204-18)

. 17 52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A FELONY

CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(Reference 52.209-11)

. 18 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2016)

(Reference 52.212-1)

. 19 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(Reference 52.212-2)

. 20 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2016)

(Reference 52.212-3)

. 21 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAY 2015)

(Reference 52.212-4)

PAGE 28 OF 43 SB1341-17-RQ-0159

. 22 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

(Reference 52.217-8)

. 23 52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(Reference 52.223-6)

. 24 52.225-8 DUTY-FREE ENTRY (OCT 2010)

(Reference 52.225-8)

. 25 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR

TRANSACTIONS RELATING TO IRAN--REPRESENTATION AND CERTIFICATIONS (OCT 2015)

(Reference 52.225-25)

. 26 52.232-13 NOTICE OF PROGRESS PAYMENTS (APR 1984)

(Reference 52.232-13)

. 27 52.232-16 PROGRESS PAYMENTS (APR 2012)

(Reference 52.232-16)

. 28 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013)

(Reference 52.232-40)

. 29 52.233-1 DISPUTES (MAY 2014)

(Reference 52.233-1)

. 30 52.233-3 PROTEST AFTER AWARD (AUG 1996)

(Reference 52.233-3)

. 31 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

(Reference 52.233-4)

. 32 52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)

(Reference 52.237-2)

. 33 52.242-13 BANKRUPTCY (JUL 1995)

(Reference 52.242-13)

. 34 52.242-15 STOP-WORK ORDER (AUG 1989)

(Reference 52.242-15)

. 35 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(Reference 52.246-2)

. 36…