SATPC0040982 Tab 04 4 SOW..pdf
PDF 88 KB Posted
- Attached to
- Procure an explosion-resistant Armag to utilize as a cured propellant test facility Federal contract opportunity
- Solicitation number
- 80NSSC26931655Q
About this file
This is a Statement of Work (SOW) for the design, fabrication, delivery, and installation of a prefabricated Hazard Division (HD) 1.3 cured propellant test facility for NASA's Marshall Space Flight Center (MSFC) Solid Propulsion and Pyrotechnic Devices Branch (ER62). The facility is a 30' × 15' × 10' explosion-resistant operations building constructed to ATF Type 2 magazine specifications and must be fully assembled and delivered as a prefabricated unit.
The facility must include an integrated explosion-resistant power distribution system with 120/208V 3-phase main panel (NEMA 3R), 100A main breaker, 50A breaker and transformer for oven/480V outlet, and multiple 120V/20A explosion-resistant receptacles. HVAC requirements specify a Class II, Division 1 explosion-resistant unit with 36,000 BTU rating and a matching explosion-resistant heater. Additional systems include ESD-rated conductive tile flooring with "Titanium Dark Gray" finish, copper bus bar grounding system with isolated ground plates, lightning protection kit with NFPA-compliant ground rods, aluminum non-sparking work benches (10'×3' and 5'×3'), shelves, isolated-ground workstations, self-contained eye-wash station, and floor drain. All doors must feature ATF-compliant hooded locking systems with panic bars. Delivery is FOB destination to MSFC in Huntsville, Alabama, with an estimated availability of approximately 30 weeks after drawing approval. Acceptance criteria include review of as-built drawings, verification that all systems match specifications, visual inspection for damage, and functional demonstrations. The contractor shall provide 12-month warranties on materials, workmanship, and paint against flaking or peeling.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0040982 Tab 06 RDSS..pdf | ||
| SATPC0040982 Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Prefabricated Cured Propellant Test Facility (Armag Corporation)
1.0 Scope
procurement, fabrication, delivery, and installation of a prefabricated Hazard Division (HD) 1.3 cured propellant test facility to support the mission needs of the Solid
30’ × 15’ × 10’ explosion-resistant operations building, constructed to ATF Type 2 magazine
ESD -
2.0 Applicable Documents
S4276).
3.0 Requirements
3.1 General Requirements
The contractor shall design, fabricate, and deliver a fully assembled prefabricated
30 ft (L) × 15 ft (W) × 10 ft (H).
S4276.
3.2 Electrical System Requirements
S4276
-resistant receptacles.
3.3 HVAC Requirements
Class II, Division 1 explosion-resistant HVAC unit
Class II, Division 1 explosion-resistant heater - - -T or
3.4 Grounding and Lightning Protection
-compliant ground rods.
3.5 Flooring and Surfaces
ESD-
3.6 Laboratory Fixtures
Aluminum non-isolated-
Self-contained eye-
Floor drain.
3.7 Penetrations and Interfaces
Through-instrument cabling.
3.8 Doors and Security
- -compliant hooded locking systems.
Panic bar on active door.
3.9 Delivery Requirements
-loading
4.0 Government-Furnished Property (If Applicable)
5.0 Inspection and Acceptance Criteria
2.
in S4276
3.
4.
o o Lighting and electrical outlets o o
6.0 Warranty
7.0 Points of Contact
NASA/MSFC Technical POC:
File details come from the government source that posted it. Updated .