SATPC0036409 Tab 04 4 SOW.pdf
PDF 127 KB Posted
- Attached to
- Semiconductor Development for Inspace Federal contract opportunity
- Solicitation number
- 80NSSC24878585Q
About this file
This document is a Statement of Work (SOW) for a federal contract opportunity related to the NASA On Demand Manufacturing of Electronics (ODME) project. The objective is to develop supplemental semiconductor technology for in-space memory manufacturing.
The contractor shall perform the following tasks: 1) Design and measure the performance of electrohydrodynamic (EHD) ink jet printed memory devices produced on-ground and in zero gravity during parabolic flight campaigns; 2) Develop the method to produce multitask Si wafers with trenches for use in memory manufacturing on-ground and in zero gravity during parabolic flight campaigns; and 3) Report on research progress and results of device characterization. The period of performance is October 2024 through March 2025, with the place of performance at Arizona State University and NASA's Marshall Space Flight Center.
The related federal contract opportunity is a sole source procurement under FAR Part 12 and 13 for "Semiconductor Development for Inspace" to be awarded to Arizona State University. NASA/NSSC is the procuring agency, and the NAICS code is 611310. The government intends to evaluate responses to this Special Notice solely to determine if the requirement should be competed.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0036409 Tab 07 RDSS_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements The NASA On Demand Manufacturing of Electronics (ODME) project is developing the technology to produce additively manufactured semiconductor devices in-space.
The requirement is for supplemental semiconductor development for in-space memory manufacturing.
2. Characteristics, Scope, and Specs
The contractor shall perform the following duties:
• Design and measure the performance of electrohydrodynamic (EHD) ink jet printed memory devices produced on-ground and in zero gravity during parabolic flight campaigns.
• Develop the method to produce multitask Si wafers with trenches for use in memory manufacturing on-ground and in zero gravity during parabolic flight campaigns.
• Report on research progress and results of device characterization.
3. Place of Performance Arizona State University, Tempe, AZ Marshall Space Flight Center, 35812-0001
4. Period of Performance Research shall be performed October 2024 through March 2025.
File details come from the government source that posted it. Updated .