SATPC0033037 Tab 04 4 SOW.pdf
PDF 42 KB Posted
- Attached to
- Cavitar Cavilux Smart Laser Head Upgrade Federal contract opportunity
- Solicitation number
- 80NSSC23847132Q
About this file
This statement of work outlines technical requirements for a pulsed, monochromatic, low-coherence laser diode illumination source. The laser must produce 50 ns illumination pulses at 640 nm wavelength, 60 kHz pulse rate, with 400 W total output power. It must provide near-uniform illumination over the field of view and minimize laser speckle on the image sensor. An eye-safe green alignment laser and compatibility with an existing Cavitar Cavilux Control unit for triggering are also required. The laser head must be smaller than 160 x 70 x 40 mm to fit within an environmental enclosure at NASA Langley Research Center's National Transonic Facility, where it will be used for time-resolved schlieren imaging experiments. The related federal contract opportunity is a special notice from NASA seeking proposals to upgrade an existing Cavitar Cavilux Smart Laser Head to meet these technical requirements.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMNT OF WORK
A pulsed, monochromatic, low-coherence laser diode illumination source is required for time-resolved schlieren imaging experiments in NASA Langley Research Center’s National Transonic Facility (NTF). The illumination source must have the ability to produce 50 ns illumination pulses at a rate of 60 kHz at a wavelength of 640 nm with low-coherence that provides near-uniform illumination over the entire field-of-view and minimizes laser speckle on the image sensor. The total possible output power of the illumination source must be 400 W. The illumination source must also have a low-power, eye-safe green alignment laser that allows for precise alignment of the illumination source. The source must be compatible with an existing Cavitar Cavilux Control unit for control of output and be capable of being synchronized to an external 5 V TTL trigger source that allows for the pulsed illumination output to coincide with the exposure of a high-speed camera for flow visualization. The illumination source must include a laser source unit, power supply, standard optical fiber light guide, and custom 50-cm-long liquid light guide for use inthe confined space of an environmental enclosure used at NTF. Physical dimensions of the laser head source must not exceed 160 mm long by 70 mm wide by 40 mm high in order to fit within the environmental enclosure while allowing room for other optical diagnostic hardware. The illumination source must also be compatible with the existing open/close laser interlock system in the NTF wind tunnel for safe operation.
File details come from the government source that posted it. Updated .