SATPC0032362 Tab 04 4 SOW.pdf
PDF 76 KB Posted
- Attached to
- External Cavity Diode Laser 852nm and wavemeter Federal contract opportunity
- Solicitation number
- 80NSSC23840076Q
About this file
This statement of work outlines requirements for an external cavity diode laser system and wavemeter to support research at NASA's Goddard Space Flight Center. The laser system must have an output wavelength of 852nm, tuning range from 845-870nm, output power of 3W, mode hop free tuning range of 30-50GHz minimum, linewidth less than 100kHz, and ASE suppression of at least 30dB. The related federal contract solicitation seeks these products to conduct experiments in NASA's QuEST Laboratory under solicitation number 80NSSC23840076Q, issued by the National Aeronautics and Space Administration Shared Services Center as a special notice opportunity. Requirements include an external cavity diode laser at 852nm and accompanying wavemeter for quantum engineering and sensing research.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK FORMAT
Toptica DLC 850 Pro External Cavity Laser and Wavemeter
PR: _____________________
Background To provide a narrow linewidth laser and wavemeter to conduct research and development in the NASA Goddard Space Flight Center Quantum Engineering and Sensing Technology (QuEST) Laboratory.
Scope Vendor shall provide the required system.
Requirements External cavity Laser system must:
a) Have an output wavelength centered at 852nm
b) Have a tuning range from 845nm to 870nm
c) Have an output power of 3W
d) Have a mode hop free tuning range of 30-50 GHz minimum
e) Have a linewidth of less than 100 kHz
f) Have amplified spontaneous emission (ASE) suppression of <-35 to -55 dB within the tuning range
g) Include optical isolator with minimum isolation of 60 dB Laser control electronics must:
a) Allow for alignment free coarse tuning over full range
b) Allow for locking to external frequency source
c) Provide current to amplifier chip up to 5A
d) Allow for low noise, current drift
e) Display to control locking, scanning, display, relock schemes and power stabilization Wavemeter must:
a) Measurement range from 330-1180 nm
b) Accuracy of 30 MHz
c) No moving parts
d) Fiber coupled
e) Include Photonic crystal 1x8 switch and associated fibers, collimators and cables Deliverables or Delivery Schedule -Delivery NLT 15 September 2023
Government-Furnished Equipment and Government-Furnished Information -None
Place of Performance -Delivery to NASA Goddard Space Flight Center
Period of Performance -Delivery NLT 15 Sept 2023
File details come from the government source that posted it. Updated .