SALIENT POINTS.pdf
PDF 101 KB Posted
- Attached to
- 8 GANG POWER DISTRIBUTION ASSY Federal contract opportunity
- Solicitation number
- SPMYM223Q2048
About this file
This document outlines the specifications for an 8-gang power distribution assembly to be procured under solicitation number SPMYM223Q2048 by the Defense Logistics Agency Land and Maritime. The assembly must be manufactured by ESL Power Systems, Inc. and include 8 receptacles of varying voltages and amperages in a 48" x 32" x 24" enclosure of 12-gauge 304 stainless steel with an orange powder coat. Key components are a 200 amp, 3-phase, 4-wire incoming connection; 2 modules of 100 amp and 60 amp receptacles respectively; and 4 modules of 30 amp receptacles. All receptacles must include safety interlocks and indicator lights. The unit will be skid-mounted and include phase indication pilot lights. It is designed to integrate with the buyer's existing power cable inventory and meet UL listing standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-23-Q-2048 Amendment.pdf | ||
| SPMYM2-23-Q-2048.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT POINTS
Below are the “salient points” for the requested equipment.
Line item 2217-100AX:
This item must be identical to what is included in the quote, it is designed to be exactly like our other bigger 12 receptacle power distribution assemblies. These power distribution assembly will only have 8 receptacles each and are made with the same style and format of receptacles only made by ESL Power Systems, Inc. all to fit our already huge inventory of power cables and their specific plugs.
• 8-gang power distribution assembly (8 Receptacles)
• MFG: ESL Power Systems, Inc.
• 480 volts AC
• 200 amp
• 3-phase
• 4-wire (3 wire w/ ground)
• Enclosure type 3RX
• 48" tall x 32" wide x 24" deep (To fit between bull rail and yellow crane safety line)
• Enclosure is mounted to a 42" x 34" skid with fork pockets
• Fabricated from 12ga 304 stainless steel and powder coated safety orange (outside at the waterfront 100% of the time).
• Assembly is factory wired complete (turnkey ready).
• Incoming power is via single pole 16 series male camlocks, color coded phase a - brown, phase b
- orange, phase c – yellow with a female ground - green. Camlocks are provided with tethered caps and are factory wired to a power distribution block.
• Cams are provided with tethered caps.
• Cams are factory wired to power distribution block.
• Includes (2) 480 volt AC, 100 amp safety-interlocked modules using a Hubbell HBL4100R7W receptacle with a 100 amp breaker. (This type of receptacle with its integrated safety interlocked modules are only available from ESL Power Systems, Inc.)
• Includes (2) 480 volt, AC 60 amp safety-interlocked modules using an ESL receptacle (IEC configuration) with a 60 amp breaker. (This type of receptacle with its integrated safety interlocked modules are only available from ESL Power Systems, Inc.)
• Includes (4) 480 volt, 30 amp safety-interlocked modules using an ESL receptacle (IEC configuration) with a 30 amp breaker. (This type of receptacle with its integrated safety interlocked modules are only available from ESL Power Systems, Inc.)
• All modules (receptacle) are provided with a receptacle energized indicating light.
• Assembly is also provided with (3) exterior mounted pilot lights to indicate voltage presence on each phase.
• Finger safe fuse holders provided to isolate pilot lights when performing megger testing.
• UL listed.
File details come from the government source that posted it. Updated .