SALIENT CHARACTERISTICS.pdf
PDF 492 KB Posted
- Attached to
- CNC TURNING CENTER Federal contract opportunity
- Solicitation number
- SPMYM225Q1522
About this file
The document is a Salient Characteristics specification for a CNC Lathe, detailing precise technical requirements for a high-precision machining tool. The CNC Lathe features include a 20.0-inch swing diameter over the front apron, 48.0-inch max cutting length, 8-inch manual chuck with A2-5 mount, and maximum spindle speed of 1800 rpm with 10.0 hp rating. Additional specifications cover axis travel, motor thrust, electrical requirements (3-phase 230 VAC), and control system features such as touchscreen interface, Ethernet connectivity, and 1GB program memory.
The specification also mandates comprehensive training and installation requirements, including a 3-day operator/maintenance training session for 1-5 people, turn-key delivery to Building 7000, and specific delivery contacts. Supplementary requirements include a one-year warranty, shipping inclusion, NTRL/UL listing, and potential transformer or breaker provisions for 480V 3-phase power. Unique options include a service mode access feature (93-2905), manual tailstock with repeatable spindle positioning, and a manual steadyrest with specific roller contact specifications. The document appears to be part of a Defense Logistics Agency Land and Maritime solicitation for a CNC Turning Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-25-Q-1522.pdf | ||
| EXHIBIT B- CDRL.pdf | ||
| SOLE SOURCE-REDACTED.pdf | ||
| EXHIBIT A- CDRL.pdf | ||
| EXHIBIT C- CDRL.pdf | ||
| SPECIFICATION.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
CNC LATHE
To include the following minimum/equal features:
Swing Diameter over Front Apron: 20.0 in Swing Diameter over Cross Slide: 11.0 in MC8-5 Spindle Chuck: 8.0 in, Manual 3-Jaw Scroll chuck; hard top reversible jaws, A2-5 Mount; 3500 rpm max rating, 2.3inch through bore Max Cutting Length: 48.0 in Max Cutting Diameter: 16.0 in Between Centers: 48.0 in X Axis Travel: 8.00 in Z Axis Travel: 48.00 in Feedrate Rapids X: 450 ipm Feedrate Rapids Z: 450 ipm Max Thrust X Axis Motor: 3894 lbf Max Thrust Z Axis Motor: 1947 lbf Spindle Nose: A2-5 Drive System: Direct Speed, Belt Drive Spindle Max Rating: 10.0 hp Spindle Max Speed: 1800 rpm Spindle Max Torque: 108.0 ft.-lbf @ 355 rpm Spindle Bore Diameter: 2.30 in Minimum Inline Air Hose 3/8 in Air Pressure Min 80 psi 20 Gal Tank w/ ¼ hp pump Input AC Voltage (3 Phase) - 230 VAC Full Load Amps (3 Phase) - High* 13 A Control Touch Screen Early Power Failure Detection Module Ethernet Interface User Definable Macros 1GB Program memory Visual part Programming System Memory lock Keyswitch USB port Work Light Chip Enclosure Cross-Slide, Tooling Ready LCC3 – Belt-type chip conveyor RTAPMM – Rigid Tapping w/ 8x retract speed HaasCNC 202 Training MTS2SO – Manual Tailstock, MT4 manual Quill, M-code controlled repeatable spindle positioning accurate to .5 degree MSR2 - Manual Steadyrest, 3 point contact rollers to 5inch diameter max, .25 diameter min 93-2905 -- This option will allow you to put the machine in service mode, which will allow access to the
Factory, I/O Config 1 EA parts list manual 2 EA Operator’s manual Operator/maintenance training. This training shall be a minimum of 3-Day Session, 8 hours/day, for 1-5 people Installation, Turn Key. Deliver to Bldg. 7000, Delivery POC Joseph Trevino 360-552-0136 or Brian
Lozano 360-315-4012
SALIENT CHARACTERISTICS
CNC LATHE
Available power is 480V 3-phases 60Hz, 13A breaker, if required a transformer shall be included, if different breaker is required contractor shall supply and install.
Shipping included warranty for one year or manufacture’s standard warranty, whichever is greater NTRL,UL Listed or equivalent with certification or sticker of compliance
File details come from the government source that posted it. Updated .