SALIENT CHARACTERISTICS.pdf
PDF 440 KB Posted
- Attached to
- ACQUISITION RECORDER Federal contract opportunity
- Solicitation number
- SPMYM2-24-Q-2480
About this file
This document is a Request for Quote (RFQ) for the procurement of an Acquisition Recorder from A & D Engineering Inc. The solicitation, numbered SPMYM2-24-Q-2480, is being issued by the Defense Logistics Agency Land and Maritime on an unrestricted basis using commercial item procedures. The resultant contract will be a firm fixed price commercial purchase order, with the requirement utilizing low price technically acceptable evaluation factors. The product is classified under NAICS 335999 and FSC 5999. The RFQ must be submitted via email to the buyer, Kim Vo, by 10 AM Pacific Time on September 09, 2024, with the FOB destination being the Puget Sound Naval Shipyard in Bremerton, WA. Offerors must complete the entire solicitation document, provide technical specifications and compliance certifications, and ensure current SAM registration. Any questions must be emailed to the buyer.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM2-24-Q-2480.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Main Unit specifications -42220109 Data Acquisition recorder
ITEM SPECIFICATIONS
Display 12.1-inch, TFT color LCD (1024×768) with capacitive touch panel
Channel
Module slot ... 9 slots Analog measurement ... Max 36 channels (when a 4-channel voltage module is used) Logic measurement ... Max 144 channels (when a 16-channel logic module is used)
Memory
Capacity 2GW (1GW/ ch during 2-channel measurement)
Division Memory
1, 2, 4, 8, 16, 32, 64, 128 division
Sampling Speed Memory recording ... Max 20MS / s (5ns) SSD recording ............. Max 1MS / s (1μs)
Storage Device
Solid State Drive (SSD) 256GB SD card slot with support for SD/ SDHC / SDXC. For data storage after recording.
USB memory using a USB port, for data storage after recording.
Printer
Printing Method
Thermal printing using a thermal head
Paper Width 219.5mm
Paper Feeding Speed
100mm / s to 1mm / min
Effective Recording Width
200mm・FS
Printer Functions
Memory Recording
Fast-speed event recording to memory
SSD
Recording
Recording of the input signal to the internal SSD
Printer Recording
Recording of the input signal directly to a thermal printer *Any combination of memory recording, SSD recording, and printer recording is possible.
Trigger
Uses Trigger for start recording operations, trigger for memory recording
Source Channels
Analog / logic signals, manual triggers and external signal triggers of each module.
Types Level triggered, window triggered (memory recording triggered ), bit pattern triggered
Trigger Filters Level hold, count
Trigger Output
Output signal when trigger conditions are met
Monitor
Y-T Waveform Monitor
Display time changes for a measurement signal in a pulse amplitude waveform
X-Y Waveform Monitor
Data is plotted with common points, with Signal 1 as the X axis and Signal 2 as the Y axis.
FFT Analysis Monitor
FFT analysis of the measurement signal of any two channels is performed, and the analysis results are displayed as the frequency axis data.
Recording and Display
Y-T Waveform
Displayed graphs ... 1 graph
Sheets ... Measurement channels are displayed in three sheets, and 48 channels are registered per sheet.
Grid ... 20 div vertically and 20 div horizontally
Time axis data count ... 100 data /div
Chart paper resolution ... Pulse amplitude axis 8dot/mm, time axis 80dot/mm (at 25mm / s)
X-Y Waveform
Data selection ... Select from input signal or recorded data
Displayed graphs ... 1 graph, 4 graphs
Grid ... 20 div vertically and 20 div horizontally
Sampling Speed ... Max 1KS / s
Locas ... ON/OFF of locas enabled (pen up& down)
Printing ... Print the plotted X-Y waveform with the printer
FFT Analysis
Data selection ... Select from input signal or recorded data
Sampling points ... 1,000, 2,000, 5,000, or 10,000 points
Max analysis frequency ... 1/2.5 times the sampling frequency
Displayed graphs ... 1 graph, 2 graphs. The Y-T waveform can also be displayed
Displayed graphs ... Waveform in time axis , linear spectrum, RMS spectrum, power spectrum, 1/1 octave, 1/3 octave,Transfer function, cross power spectrum, and coherence function
Window function ... Hanning window
Average processing ... Time axis simple addition average, frequency axis simple addition average,frequency axis exponentially weighted average, frequency axis peak hold
Interface
LAN
1000BASE-T (1Gbps) ... For control with communication command
COM
RS-232C ... For control by communication command or for UPS shutdown
USB Ver. 3.0 2 port ... For storage devices (USB memory)
Video Output DVI-D
Operating Environment Temperature 5 to 40°C Humidity 35 to 80% RH (without condensation)
Power Supply 100 to 240VAC, Frequency 50 to 60Hz Power consumption 300VA or less (under the maximum load conditions)
Dimensions 394 (W) × 336(H) × 200(D) mm *Excluding projections
Weight 9.5kg or less (main body only) 11 kg or less (when main body and four 2-channel voltage modules are installed)
Module Specifications 42220109-42220115
ITEM SPECIFICATIONS
•2ch Voltage Module- 4222110 item 2
Channel 2ch
Input Coupling AC, DC, and GND coupling
Maximum Sampling Speed
1MS / s
Frequency Response (- 3dB)
DC to 100kHz
A/D Resolution 16bit
Range Accuracy ±0.3% of RANGE *After offset cancellation
Allowable Input Voltage ±500V (DC or AC peak values)
Measurement Range 100mV to 500V (1-2-5 step)
Input Terminals and Models
Insulated BNC connector, insulated unbalanced input, isolation between each channel
Input Impedance 1MΩ
Low-Pass Filter 3, 30, 300, 3k, OFF
Anti-Aliasing Filter 10 to 40kHz
Maximum Rated Voltage To Earth
AC, DC300V
•4ch Voltage Module RA30-102
Channel 4ch
Input Coupling DC and GND coupling
Maximum Sampling Speed
1MS / s
Frequency Response (- 3dB)
DC to 100kHz
A/D Resolution 16bit
Range Accuracy ±0.2% of RANGE *After offset cancellation
Allowable Input Voltage ±200V (DC or AC peak values)
Measurement Range 1V to 200V (1-2-5 step)
Input Terminals and Models
Insulated BNC connector, insulated unbalanced input, isolation between each channel
Input Impedance 1MΩ
Low-Pass Filter 3, 30, 300, 3k, OFF
Maximum Rated Voltage To Earth
AC, DC300V
•2ch High-speed Voltage Module- 4220113 item 6
Channel 2ch
Input Coupling AC, DC, and GND coupling
Maximum Sampling Speed
20MS / s
Frequency Response (- 3dB)
DC to 5MHz
A/D Resolution 14bit
Range Accuracy ±0.5% of RANGE *After offset cancellation
Allowable Input Voltage ±500V (DC or AC peak values)
Measurement Range 100mV to 500V (1-2-5 step)
Input Terminals and Models
Insulated BNC connector, insulated unbalanced input, isolation between each channel
Input Impedance 1MΩ
Low-Pass Filter 5, 50k, 500k, OFF
Maximum Rated Voltage To Earth
AC, DC300V
•16-channel Logic Module
Bit 16bit
Maximum Sampling Speed
1MS / s
Input Type Voltage or contact, isolated input, no insulation between channels
Input Voltage Range 0~24V
Input Response Time 1μs
Input Terminal 8ch square connector x 2 ports
Notes Input by an optional IC clip or electrical clip code
•Remote Control Module
Features
Start/Stop by external signal, mark print, paper-feed, external sample
Input of external trigger signal, trigger signal output
Synchronous digital signal for AC distortion module
Module Name Specifications
2ch Voltage Module – 42220112 item 4
2ch, Sampling Speed 1MS / s, Maximum input voltage ±500V with anti-aliasing filter
4ch Voltage Module 4ch, Sampling Speed 1MS/ s, maximum input voltage ±200V
2ch High-speed Voltage Module 42220103 item
2ch, Sampling speed 20MS/ s, maximum input voltage ±500V
16-channel Logic Module 16 channels (voltage or contact)
Remote Control Module Remote control, TRIG IN/OUT, synchronization signal output when an AC distortion module is used
File details come from the government source that posted it. Updated .