SALIENT CHARACTERISTICS.pdf
PDF 566 KB Posted
- Attached to
- PRESSURE WASHER Federal contract opportunity
- Solicitation number
- SPMYM224Q2297
About this file
This document contains the salient characteristics for three Pressure Washers required under Project #270-340. The pressure washers must meet the following key requirements: 5 GPM @ 5,000 PSI, 23.5 HP Kohler KDW 1003 Diesel Engine, diesel fired burner, skid mounted, stainless steel coil wrap and panel, electric starter, UL listed, and adjustable thermostat. Options include a battery option and a steam option. The pressure washers must be NRTL (Nationally Recognized Testing Laboratory) certified in compliance with OSHA regulations under 29 CFR 1910. Three hard copies of the NRTL certification report must be provided for each pressure washer. This document is related to a federal contract opportunity, Solicitation Number SPMYM224Q2297, issued by the Defense Logistics Agency Land and Maritime for Pressure Washers.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EXHIBIT A- CDRL-NRTL.pdf | ||
| SPMYM2-24-Q-2297.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Pressure Washers (Qty: 3) Project #270-340
SALIENT CHARACTERISTICS
24 Jul 24
1. Pressure Washers (Qty: 3) (Ben’s Cleaner Sales Inc., Alkota Model AL-5507-UL or equal) shall each include the following requirements:
a. 5 GPM @ 5,000 PSI
b. 23.5 HP Kohler KDW 1003 Diesel Engine
c. Diesel Fired Burner
d. Skid Mounted
e. Stainless Steel Coil Wrap and Panel
f. Electric Starter
g. UL Listed
h. Adjustable Thermostat
2. Pressure Washer Options (for Ben’s Cleaner Sales Inc., Alkota Model AL-5507-UL or equal) shall include the following:
a. Battery Option
b. Steam option
3. NRTL Safety Certification Requirements:
a. The equipment and its component parts shall be in compliance with applicable Code of Federal Regulations (CFR) Title 29, Part 1910. By definition, any equipment will be deemed acceptable and approved by TRF, Bangor, if it meets specific Occupational Safety and Health Administration (OSHA) conditions outlined in CFR Title 29, Part 1910;
Subparts "O" and "S". Specifically, equipment will be "Accepted" by TRF, Bangor, if it has been inspected and found by a Nationally Recognized Testing Laboratory (NRTL) to conform to specified plans or procedures of applicable codes. The equipment (as a whole system) shall be Nationally Recognized Testing Laboratory (NRTL) inspected and certified (by an OSHA authorized third party). Three “hard” copies (one copy per pressure washer) of the NRTL certification report shall be provided. If the equipment type/model has already been NRTL inspected and certified, a certification report (three “hard” copies, one copy per pressure washer shall be provided) or sticker documentation mounted on the equipment, (which acknowledges it is NRTL certified), shall be provided.
File details come from the government source that posted it. Updated .