SALIENT CHARACTERISTICS.pdf
PDF 142 KB Posted
- Attached to
- CNC TURNING MACHINE Federal contract opportunity
- Solicitation number
- SPMYM223Q2094
About this file
This document outlines the salient characteristics for a CNC turning center machine. The federal opportunity is seeking a DMG MORI NLX3000 700 CNC turning center or equal, including a 38.5 inch swing over bed, 31.8 inch swing over cross slide, 16.5 inch maximum turning diameter, 3000 rpm high output spindle, 12 station turret with 10,000 rpm maximum rotary tool spindle speed, 30HP spindle drive motor, and full closed loop control for the x and y axes. The machine must operate on 480V 3-phase 60Hz power and include a 1-year warranty, NRTL inspection, 5 days of on-site training, turnkey installation, and freight packaging. The related federal contract opportunity is a pre-solicitation through the Defense Logistics Agency Land and Maritime for solicitation number SPMYM223Q2094 to procure a CNC turning machine.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPECIFICATION.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS CNC TURNING CENTER
CNC Turning Center (DMG MORI NLX3000 700 or equal) to include the following minimum/equal features:
• Swing over bed 38.5”.
• Swing over cross slide 31.8”
• Maximum turning diameter 16.5” Standard turning diameter 14.1”.
• Maximum turning length 28.1”.
• Travel “x” axis 11.0”, “y” axis +/- 2.36”, “z” axis 32.3”.
• High Output Spindle - Speed 3000 rpm max.
• 12” Kitagawa Chuck, 3-Jaw Hydraulic and hollow cylinder and draw bar.
• Spindle Nose JIS A2-8
• Spindle Hole diameter 4.4”
• Spindle bearing inner diameter 6.3”.
• Turret 12 tool stations, “Y” axis =/-2.36” travel, Maximum rotary tool spindle speed 10,000rpm.
• Feed rate “x” axis 1,181. IPM, “y” axis 393.7 IPM, “z” axis 1181 IPM, “c” axis 393.
• Tailstock - travel 28.9”, spindle diameter 4.3”, taper hole of tailstock spindle live center MT5, Built in center MT4.
• Spindle Drive motor high output 30HP, Rotary tool spindle 5HP, Feed motor “x” 4HP, “y” 4HP, “z”
6HP
• Coolant supply interface with chip conveyor, High Pressure, Coolant Gun, Coolant tank capacity 79.2 gallons. Chip flushing coolant for bed cover.
• Hinge Belt Chip conveyor
• Tool presetter, in machine.
• Full closed loop control for “x” and “y” axis.
• Oil Chiller.
• Lights- LED Work light, 4-color signal light.
• Control- Mitsubishi w/ERGOline Touch, English, optional block skip, IoTconnector, NETservice, 21.5 inch touch screen, MAPPS, Machine Data Connector, Machine Lock, Chuck and Tailstock barrie, Chamfering On/Off, Backlash Compensation, Operation – Dry Run, Single Block, Jog Feed. Manual return to reference position, Manual handle feed. Interpolation Functions- Positioning, Thread cutting/synchronous feed, Multiple thread cutting, Retract during thread cutting cycle, continuous thread cutting, variable lead thread cutting, return to reference position, reference position return check, return to second reference position, 3rd/4th reference position return.
• Manual Pulse generator.
• Feed Functions-Rapid traverse, Rapid traverse override, feed per minute, feed per revolution, constant tangential federate control, federate override, override cancel
• Basic Rotary Tool Holder Package- O.D. cutting rotary tool holder, Face cutting rotary tool holder and chuck collets AR40-4,5,6,8(2 each), 10(2 each), 12(2 each) and 16.
• Basic Turning Tool Holder Package- O.D. cutting tool holder 1”x1” (2 each), Face and I.D. cutting tool holder 1”x1” (2 each), Boring Bar Holder 1 ½”, with boring bar sleeves 3/8” (2 each), ½” (2 each), 5/8” (2 each), ¾” (2 each), 1” (2 each), 1 ¼”, Drill Socket MT1 1 ½”, Drill Socket MT2 1 ½”, Drill Socket MT3 1 ½”.
• The machine shall operate on 480 VAC, 3-phase, 60 Hz electrical power, in its fully configured and operational state. Installation may require a step-down transform ( if required it is to be provided and installed by the contractor).
• 1-year or machine standard warranty.
• NRTL inspection.
• 5 days on-site training.
• “Turn Key” Installation.
• Freight, Package Freight.
File details come from the government source that posted it. Updated .