SALIENT CHARACTERISTICS.pdf

Light weight Industrial Stick/TIG welding machine

Document # 3127-3348

Must meet the following specifications:

. Must be able to weld on material type: Mild Steel, Stainless Steel

. Must be able to weld maximum material thickness3/8 in (Aluminum), 3/8 in (Mild Steel)

. Must be able to weld minimum material thickness0.004 in (Mild Steel), 0.012 in (Aluminum)

. Input Frequency50/60 Hz

. Max. Input Current200A at 230 - 460 VAC 1ph, 300A at 230 - 460 VAC 3ph

. Must run on single-phase at 5-200 Amps and three-phase at 5-300 Amps

. Polarity DC

. Stick Welding Maximum Output Current 300 A

. Stick Welding Minimum Output Current 5 A

. Stick Welding Output @ Duty Cycle 200 A @ 28 V, 100%, 250 A @ 30 V, 60%, 300 A @ 32 V, 40%

. TIG Welding Maximum Output Current 300 A

. TIG Welding Minimum Output Current 5 A

. TIG Welding Output @ Duty Cycle 200 A @ 18 V, 100%, 250 A @ 20 V, 60%, 300 A @ 22 V, 40%

. Welding Processes Stick Welding (SMAW), TIG Welding (GTAW)

. Must have Amperage Range 5 A to 300 A

. Must have Digital Readout Display, Integrated Latch System, Intuitive Interface, Rugged Case, Small, Three Handle Design

. Must include power supply, 10-ft. input cable, and two OKC 50 connectors

. Input Voltage208V AC, 460V AC

. Must have the following dimensions: Overall Depth 18.5 inches, Overall Height 12.61 inches, Overall Width 7.91 inches

. Plug Type: Bare Leads

. Must meet Nationally Recognized Testing Laboratory standards (CSA)

. Must weigh 33 pounds or less (for mobility standards)

. Must have welding Mode: CC

. Rated Output - STICK

40% Duty Cycle 3ph at 300 A / 30 V

60% Duty Cycle 3ph at 250 A / 30 V

100% Duty Cycle 1ph/3ph at 200 A / 28 V

. Rated Output - TIG

40% Duty Cycle at 300 A / 20 V

60% Duty Cycle at 250 A / 20 V

100% Duty Cycle 1ph/3ph at 200 A / 18 V

. Low open circuit voltage option must be enabled (VRD)