SALIENT CHARACTERISTICS.pdf

Salient Characteristics Temp Enclosure

Enclosure should be 30FT Wide x 50FT Long x 15FT High

Enclosure frame should be made using Galvanized hot dipped Steel for maximum corrosion and rust resistance inside and out. Frame should be 2-1/2 to 3” tubing, 13 gauge or thicker, frame should have flanged / bolted connection points for added rigidity / stability. Frame will need all hardware supplied for complete assembly.

Door / Entrance Height Outside- 9 ft. 6 in, Center- 12ft. 4 in, Width Top & Bottom- 15 ft. Door opening should be able to be secured using a zipper type system utilizing an industrial grade zipper. Zipper to material should be minimal double stitched. There should be three vertical panels at opening for ease of entry. Back portion of enclosure shall be solid.

Cover Material should be industrial grade PVC 21.5oz or greater in a green color. Cover will be UV Treated to ISO 4892-3. Cover should be Flame resistant to a NFPA 701 and Flame tested to ASTM 6413.

Cover will be 100% Waterproof, seams should be non-stitched fusion is preferred and be tear resistant.

Cover will need a tensioning anchor system for maintaining smooth tight and secure cover surface.

Cover should be rated for 15 years or greater without significant fading.

Roof style shall be round. Must have a wind speed rating of 145 MPH or greater in accordance with ASCE 7-05. Snow load capacity also needs to meet ASCE 7-05 with a rating of 49 PSF or greater.

Along with the shelter, we need two anchors per rib (frame) to attach to the ground. Anchors shall be able to attach in rocky soil/ gravel. Needs to be manufactured out of steel with steel cables for long lasting durability.