SALIENT CHARACTERISTICS.pdf
PDF 420 KB Posted
- Attached to
- HP WATER JETTING SYSTEM Federal contract opportunity
- Solicitation number
- SPMYM223Q1225
About this file
This document contains a sources sought notice and salient characteristics for a high pressure water jetting system procurement. The Defense Logistics Agency Maritime Puget Sound is seeking information from capable sources to identify potential suppliers for eight high pressure water jetting systems with a 50 HP motor, 10,000 PSI rating, and dimensions of approximately 48" tall by 45" wide by 34" deep. Responses are requested to include organization details, capability statements, and supporting documentation, and must be submitted no later than May 8, 2023 to tricia.wintersteen@dla.mil. The results will inform the agency's procurement method for this requirement.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Doc #: 31043765
SALIENTS
High Pressure Water
Jetting System
-High Pressure Water Jetting System (for cleaning Heat Exchanger Tubes)
* Rated for 10K PSI
* Rated for 7 GPM
* Manual Pressure Control Valve
* Rupture Disc for 11K PSI (Relief Valve will suffice if Rupture Disc not feasible)
* Dimensions of the system to be approximately: 48” Tall x 45” Wide x 34” Deep to allow for being portable and allowing system to fit down into the engineering spaces of a Naval Vessel.
* Equipped for ½” NPT outlet for Aeroquip quick connects for Hoses along with Aeroquip quick connects for pressure gauge and relief valve.
* Standard Motor Control Cabinet (MCC) to be installed in lieu of the Variable Frequency Drive (VFD) and a Fused Knife Disconnect installed on the unit.
* 10 Micron Filter installed on the water side.
* 50 HP Motor, 480V, 3 Phase, 60Hz, 59.2 Amp
File details come from the government source that posted it. Updated .