SALIENT CHARACTERISTICS.docx
DOCX document 16 KB Posted
- Attached to
- INDUCTION SUPPLY Federal contract opportunity
- Solicitation number
- SPMYM224Q1238
About this file
This document appears to be a list of salient characteristics for the Thermo International IS006 induction heater, which is the subject of a federal contract opportunity solicitation issued by the Defense Logistics Agency Land and Maritime. The salient characteristics describe the required technical specifications for the power supply, output, voltage, water requirements, physical dimensions, and other design features. The related federal contract opportunity is for the procurement of this induction supply, with a solicitation number of SPMYM2-24-Q-1238. The solicitation requires offerors to provide a stand-alone specification sheet, complete pricing and representations/certifications, and manufacturer information, and to be registered in SAM.gov. No additional details are provided about the contract opportunity timeline, award process, or other terms.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 24Q1238 INDUCTION SUPPLY.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics JML: 4016-3750 thru 4016-3757
JML: 4016-3750
Description:
Must come with the following characteristic:
· 60 Kilowatt power supply
· 2-12 kHz output
· 380-575 volt 3 Phase (Not Phase Sensitive) input
· 380-575 with optional automated Switcher board
· 4GPM @35PSI Water Requirement.
· 40” High, 45” Long, 21.5” Wide
· Approximately 650 Pounds
· All Aluminum TIG welded 6061 frame
· Upgradeable PLC based interface
· HMI Display (Human Machine Interface)
· Password Protected fault History
· Inverter Block Design making field repairs simpler
· Ground Fault System Standard
· On board diagnostics eliminating the need for technicians to measure live voltages in the field
· MIL Spec E Stop
· Custom Designed Trappable Isolation Transformer to allow load tuning
· Isolated Capacitor Towers to allow load tuning
· Built in booster pump
· Front mounted Coaxial cable
· Front Mounted On, Off, Emergency Stop, Power level control and Breakers
· Front mounted Remote on off connector
· Remote on off pendant
· Offset Coax terminations eliminating the need for short flexible leads
· Rear Mounted Power inlet trough designed to take 6AWG to 500 MCM cable
· Rear Mounted Water inlet and outlet utilizing Quick disconnect fittings
· Stainless steel front and rear panel
· Aluminum diamond plate exterior
· Front Swivel castors for easy movement
· Large rear wheels for easy movement over industrial floor grating
JML: 4016-3751
Description:
Must be a Remote On/Off Pendant 60 KW Induction Power Supply
JML: 4016-3752
Must be coaxial cable for the Thermo International IS006 induction heater.
JML: 4016-3753
Description:
Must be water hose for the Thermo International IS006 induction heater.
JML: 4016-3754
Description:
Must be a Fitting kit for the Thermo international IS006 induction heater.
JML: 4016-3755
Description:
Must be Transmission Lead for the Thermo international IS006 induction heater.
JML: 4016-3756
Must be 4 way Manifold for the Thermo international IS006 induction heater.
JML: 4016-3757
Must be a Repair Kit for 60kw for the Thermo international IS006 induction heater.
File details come from the government source that posted it. Updated .