SALIENT CHARACTERISTICS CLIN 0003.docx
DOCX document 25 KB Posted
- Attached to
- HOSE Federal contract opportunity
- Solicitation number
- SPMYM2-24-Q-0682
About this file
This solicitation requests quotes for the supply of potable water hose assemblies to the Defense Logistics Agency at Puget Sound Naval Shipyard in Bremerton, Washington. The requirement is set aside for small businesses only and utilizes a low-price technically acceptable evaluation. Quotes are due by January 31, 2024 and must be submitted electronically to the specified buyer. The potable water hose assemblies must be 1" inner diameter by 50 feet in length, rated to 250 PSI working pressure and 1000 PSI burst pressure, and consist of chlorobutyl rubber inner tube, synthetic fabric reinforcement, SBR or EPDM cover, and brass cam and groove couplings with stainless steel ferrules. Submitted quotes must include manufacturer cut sheets, part numbers, country of manufacture, and delivery lead time with an FOB destination price to Bremerton, Washington.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SALIENT CHARACTERISTICS CLIN 0002.doc | DOC document | |
| SOLICITATION SPMYM2-24-Q-0682.pdf | ||
| SALIENT CHARACTERISTICS CLIN 0001.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT ITEM DESCRIPTION: 1" POTABLE WATER SUPPLY HOSE ASSEMBLY
(1” I.D. X 50’ LONG)
FULLY ASSEMBLED HOSE DESIGNED TO HANDLE WATER SUITABLE FOR DRINKING.
TO BE USED IN POTABLE WATER SERVICES.
SUGGESTED SOURCE: 1) GOODYEAR,
2) UNISOURCE, POTABLE WATER HOSE, Part # 2765-100-050 Or Equal
Or Equal Purchase Specification:
Hose, Nonmetallic, Multiple Plies of tube, reinforcement and cover: The Inner Tube to be made of White Chlorobutyl Rubber. The Reinforcement to be Synthetic textile fabric piles with Monofilament Helix, NO METAL HELICAL WIRE REINFORCEMENT. The outer cover may be SBR or EPDM cloth wrapped impression. Hoses to be coupled and fully assembled using PT Coupling Company, Bronze Cam & Grove end fittings and Stainless Steel Interlocking Ferrules.
Description:
1. Size: I" I.D. by 50’ Long.
2. Nominal OD: 1.50”
3. Application: Temporary Service, Potable Water transfer systems on piers, dry docks and within ship spaces.
4. Expected Working Pressure of Intended Services: 150 PSI.
5. Manufactured Rated Working Pressure: 250 PSI maximum.
6. Burst Pressure: 1,000 PSI minimum.
7. Rated bend radius: N/A
8. Rated Continuous Temperature: -25º F to 180º F minimum.
9. No price quote or bid offer will be accepted without the offerer submitting: hose, fitting, and ferrule manufacturer cut sheets or product description sheet attachments, which shall include as a minimum the technical characteristic of the components and the manufacturer’s address, telephone/fax number and manufacturer point of contact. The price quote must reference the manufacturer's part numbers for the item quoted.
10. All quoting vendors if requested must submit a five-foot long hose assembly to Shop 99 at vendor’s expense, for destructive testing analysis prior to PSNS & IMF Engineering Code 260.41 approval to purchase.
11. PSNS & IMF Engineering Code 260.41 must approve all exceptions and Or-Equal offer’s prior to purchase.
Construction:
12. Tube: White Chlorobutyl Rubber. (Compliant to FDA 3A Standard 18-03 Class III for milk).
13. Cover: SBR or EPDM rubber, cloth wrapped impression. Non-wired or braid, multiple synthetic textile fabric pile construction.
14. Reinforcement: Synthetic textile fabric piles.
15. Cover Color: Blue
16. Hose end assembly shall be accomplished in accordance with established National Association for Hose & Accessories.
Distribution (NAHAD) certification standards.
17. Each hose assembly shall have the following components installed at each end:
1st Hose End; Brass, 1” Male Cam & Groove Adapter by Hose Shank, PT Coupling Co., Part # 10E, Item # 1200510.
2nd Hose End; Brass, 1” Female Cam & Groove Coupler by Hose Shank, with Stainless Steel Cam Arms, Pins, Pull Rings, and Passive Locking Device, PT Coupling Co., Part # 10CSLII, Item # 1290310L2.
End Fitting must be made from virgin brass and meet Commercial Item Description (CID) A-A-59326.
End Fitting Interlocking Ferrules: End Fittings shall be coupled to the hose with PT Coupling Co., “Pro-Grip C50SS” Stainless Steel Crimp Ferrules sized to match the hose and fittings.
18. Branding / Marking: Hose shall be continuously ink-branded or Mylar or striped in white or a contrasting color to the blue outer cover of the hose. The lettering shall state as a minimum:
a. Manufacturer Name/Hose Brand/Line/Model number,
b. “Potable” or “Potable Water Hose”
c. Manufacturers rated WP (150 PSI minimum)
Hose Test & Assembly Certification:
After each hose assembly is completed it shall be hydrostatically strength tested with potable water as a test medium, at 225 (+20, -0) PSIG for 10 minutes. Manufacturer shall certify that hose assemblies are free of leaks, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are still properly positioned on the hose ends; also that the hose does not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects in the outer cover. Written certification of satisfactory hose end assembly in accordance with NAHAD standards and satisfactory hydrostatically tested (100% of hoses) shall be provided with shipped hoses.
D:\Documents and Settings\darrel.vliet\My Documents\0.5 IN x 50 FT Potable Water Hose Assembly Description.doc Last revised 5/26/2009 fwv
File details come from the government source that posted it. Updated .