Salient Characteristics - Borescope.pdf

Justification

This equipment will be used for multiple purposes, including but not limited to the following: FOD inspections in piping systems, corrosion and erosion inspections in new or in-service piping systems, re-inspections of previously inspected product where the distance from an opening in the pipe system makes direct visual inspection impractical / or impossible, verification of indications found during volumetric inspections (RT) where there is doubt as to whether the indication is a root surface imperfection or subsurface defect, inspection of gas turbine engine blades, and another SUPSHIP Operations Manual (SOM) related requirements.

Requirements

Required parts and conditions of a flexible engine scope kit should include a minimum one-year warranty that covers the entire scope kit. The company supplying the scope kit will offer in-house instruction and training at no additional cost. The scope kit should have a case with wheels for easy transportation around the work site. The scope kit will have a base or stand that allows the borescope screen to be held. This will free up the technician’s hands providing for an easier and safer inspection.

The scope kit at a minimum come with an internal hook tool and replacement hooks. Kit should include other working channel tools such as basket, snare, grasper and magnet. Scope kit must have a working channel with an outside diameter of 6.0mm (+ or -) .5mm. Based on the need for precise and accurate inspections inside the engine, 3D modeling capability is required to allow inspection from multiple angles, providing a exact measurement points for damage that is found. The scope kit must include optical tip adapters with measurement capability. Scope kits must have internal memory storage and should include external storage devices to transfer inspection findings to computer for distribution.

Borescopes will be able to operate standalone on battery power.

Part Numbers/Brand Name or Equal

1 Each - V9000N-BX - IV9000N IPLEX NX BASE UNIT DELUXE

IPLEX NX base is a body that requires an IPLEX NX SCOPE to operate. This unit includes an 8.4" touchscreen, PulsarPic image processor, 3 year warranty, and is stored in a workstation case. The case also includes (1) each of the following, unless otherwise specified: IV9000N Base Unit, shoulder belt, drum case, velcro strap (scope holder), 4GB SHDC card, SD Card Reader, LCD hold bracket, AC adapter, battery charger, 2 batteries, K1155428 clamp, MAJ-2260 remote control unit, and MAJ-2261 2m Long LCD Cable.

1 Each - IV9635N-MDS - IV9635N IPLEX NX 6MM 3.5M SCOPE WITH MEASUREMENT

Interchangeable scope unit for IPLEX NX Videoscope System Consists of : Interchangeable scope unit, 6.0mm diameter by 3.5m long, and loaded with Stereo Measurement and includes the stereo tip adapters: AT90D/90D-IV96N and AT70S/70S-IV96N and Check tool for IV6.

Model Number: IV9635N Scope Diameter: 6.0mm Scope Working Length: 3.5m Includes tip adapter case, Stereo Optical tip adapters, O-ring, cleaning kit, and drum. Tip adapters AT90D/90D-IV96N and AT70S/70S-IV96N included.

1 Each - AT120D/FFIV96N - AT120D/FF-IV96N IPLEX NX TIP ADAPTER Include O-ring.

Direction of View: Direct Scope Diameter: 6 mm Field of View: 120° Depth of Field: 19 - 8mm