SALIENT CHARACTERISTICS 24Q2304.pdf
PDF 346 KB Posted
- Attached to
- CONTAINER, SHIPPING Federal contract opportunity
- Solicitation number
- SPMYM224Q2304
About this file
This document contains the Salient Characteristics for 06G Shop Equipment, which describes the requirements for a 20' x 8'6" x 8'0" steel dry freight ISO container. The key modifications and features include front-end intake louvers, rear-end intake louvers, curbside and roadside wall cutouts and roll-up doors, interior insulation and linings, HVAC systems, electrical and lighting systems, and painting/marking specifications. The related federal contract opportunity is for a Solicitation for a CONTAINER, SHIPPING requirement issued by the Defense Logistics Agency Land and Maritime. The Solicitation Number is SPMYM224Q2304.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-24-Q-2304.pdf | ||
| EXHIBIT A CDRL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for
06G Shop Equipment 5/3/2023
NEW 20' x 8'6" x 8'0" STEEL DRY FREIGHT ISO CONTAINER
1. SCOPE - These salient characteristics reflects those characteristics that are essential to the minimum needs of the government for the following shop equipment, to include the following items:
Front End Modifications:
1.1. Cutout, Frame & reinforce (1) Clear Openings for intake louvers.
1.2. Supply & Install (1) Approx 40-1/2” Wide x 33” High intake louver
1.3. Cutout, frame & reinforce (2) clear openings for intake louvers
1.4. Supply & install (2) 12” square stationary intake louvers
Rear End Modifications (standard double cargo doors):
2.1. Cutout, frame & reinforce (2) clear openings for intake louvers, (1) in each cargo door. Supply & install (2) 12” square stationary intake louvers.
Curbside wall modifications or cut outs:
3.1. Cutout, frame & reinforce (1) 120” wide x 80” high clear opening for rollup door
3.2. Supply & install (1) 120” wide steel roll door, Janus type.
3.3. Cutout, frame & reinforce (1) 72” wide x 80” high clear opening for rollup door.
3.4. Supply & install (1) 72” wide steel rollup door, Janus type.
Roadside wall modifications or cut outs:
4.1. Cutout, frame & reinforce (2) clear openings for exhaust fans.
4.2. Cutout, frame & reinforce (1) 18” square opening for hoses and electrical cables. Includes removable gasket cover plate.
4.3. Power entry #1 – Supply & install threaded coupling with piping to main power distribution panel ready for customer’s hard wire connection.
Interior walls & ceiling, insulation & linings:
5.1. Supply & install SBI standard insulation package in 20’ container, which consists of 1-1/2” foam insulation, 3/8” plywood with white textured plastic lining. Thermal value approx. R10.
Heating, ventilation & air conditioning systems (hvac)
6.1. Supply & install (2) 24” direct drive Sutter mount exhaust fan. Includes single speed thermostat.
Electrical & lighting systems:
7.1. Load center: Supply & install (1) each 100 amps, 240 volts, 60Hz, 10
7.2. Circuit 1 – lighting: Supply & install (2) 4’ long, 6,250 Lumens, 45 Watt 120-277 VAC, LED light fixture. IP65 Rated. PN: VTS4/PS60/840/UD. Budget provides (1) light switch & breaker. Optional light setting
– 60 watts/8,000 lumens.
7.3. Circuit 2 – receptacles: Supply & install (2) each duplex receptacles, Nema 5-20R, 20 Amp breaker
7.4. Circuit 3 – receptacles: Supply & install (2) each duplex receptacles, Nema 5-20R, 20 Amp breaker
7.5. Circuit 4 – exhaust fan: Supply & install (1) breaker.
7.6. Supply & install (1) Each grounding stud to power entry location.
Salient Characteristics for
06G Shop Equipment 5/3/2023
Painting Specifications & Markings – Interior & Exterior:
8.1. 20’ container blast welds SSPC-SP10 and brush blast needed areas
New Exterior Industrial Paint On Walls & Roof:
9.1. 20’ container paint preparation & cleaning
9.2. 20’ container primer and top coat:
9.3. 66% zinc primer
9.4. Polyzen top coat
New interior industrial paint on walls & ceiling:
10.1. 20’ container paint preparation & cleaning
10.2. 20’ container primer and top coat:
10.3. 66% Zinc Primer
10.4. Polyzen top coat
Markings:
11.1. Original unit numbers
11.2. Supply & install manufactured by ID plate. Note: Not for overseas transport
Quality Inspection, Testing, Data, Drawings and Customer Design & Review Meetings:
12.1. Quality check all features
12.2. General arrangement drawings
12.3. Project management
File details come from the government source that posted it. Updated .