Synopsis_Solicitation_S5121A-16-R-0010-.pdf

COMBINED SYNOPSIS/SOLICITATION NOTICE-S5121A-16-R-0010

IAW FAR 12.602(c)(1) and FAR 5.207

Notice Type: Combined Synopsis/Solicitation Solicitation Number: S5121A-16-R-0010 Title : 2016_JAWS Recompete, DCMA Classification Code: R – PSC Code: R425 NAICS Code: 541512 Is this Recovery and Reinvestment Act Action: No Response Date: 06/29/16 Response Time: 6:00 pm EST Primary POC: Tammie Lett-Chalmers Secondary POC: Christopher Moore

Performance Work Statement (PWS) Maintenance of Custom Job Access with Speech (JAWS) Scripting and System Accessibility Testing

Vision Statement

Customize Job Access with Speech (JAWS) application to convert text into computer synthesized speech allowing JAWSS to interact with Office, Adobe Reader, Internet Explorer, Oracle Based-Mechanization of Contract Administration Services (MOCAS), Defense Agencies Initiative (DAI), internal Web Access Management (IWAM) Wide Area Work Flow (WAWF) contract writing programs and stated mandated programs by configuring customized functions based on the employees job specification and essential task. In addition to the customization process,vendor will also provide training. These services are being requested to provide worksite technical support for screen reading software as an accommodation.

1 Introduction

1.1 Mission

DCMA is a DoD component that provides Contract Administration Services (CAS) to the DoD Enterprise. DCMA works directly with Defense suppliers to ensure that DoD, Federal, and allied government supplies and services are delivered on time, at projected cost, and meet all performance requirements. DCMA professionals serve as "information brokers" and in-plant representatives for military, Federal, and allied government buying agencies, both during the initial stages of the acquisition cycle and throughout the life of the resulting contracts.

DCMA is headquartered in Fort Lee, Virginia and employs approximately 10,000 civilian and military professionals with over 800 employee duty stations worldwide. DCMA consists of over 50 Contract Management Offices (CMOs), managing 300,000 prime contracts valued at approximately $1.2 trillion

1.2 Background Analysis

DCMA currently uses Job Access With Speech (JAWS) is a screen reader for the visually impaired. JAWS uses an integrated voice synthesizer and computer's sound card to read the content on employee computer screen and send the information to the computer's speakers. Routine and periodic changes to employee’s computer workstation can inadvertently disable JAWS scripts leaving employees with no means of accessing or using the proprietary computer systems. This technology allows persons who are visually impaired to access a variety of information.

1.3 Scope

Customize the Job Access with Speech (JAWS) application to convert text into computer synthesized speech allowing JAWS to interact Office, Adobe Reader, Internet Explorer, Oracle Based- Mechanization of Contract Administration Services (MOCAS) , Defense Agencies Initiative (DAI), Internal Web Access Management

(IWAM), Wide Area Work Flow (WAWF), contract writing programs and stated mandated programs by configuring customized functions based on the employee’s job specification and essential tasks. In addition to the customization process, vendor will also provide training. These services are being requested to provide worksite(on-site) technical support for screen reading software as an accommodation.

2 General Requirements DCMA currently uses (JAWS) screen reader to support visually impaired employees that must use synthetic speech output to read computer displays.

Task 1: The contractor shall comply with the appropriate Federal and DoD architectures, programs, standards and guidelines. Specific areas addressed in the PWS are:

• Identify and correct JAWS accessibility issues.

• Provide assistance in converting inaccessible systems into accessible systems.

• Provide custom scripting of assistive technology

• Provide software maintenance for custom (JAWS) Scripting

• Provide remediation for accessibility issues

• Provide on call service and scripting of JAWS software during outages. .

• Configure JAWS software to work with DCMA proprietary systems

• Provide pre-evaluation and follow-up regarding configuring of JAWS software.

• Provide plan to remediate any accessibility issues.

Subtask 2 – Troubleshooting JAWS Software accessibility issues and functional problems. This requires testing of custom Jaws scripts, software, and coordination with end users and may include analyzing the problem, conducting research, working with the user, also coordination with different DCMA software Program managers, preparing documentation related to the problem and resolution.

The Contractor shall acquire and maintain all necessary commercial, Open Source, and third party hardware and software agreements to include licenses, warranties, and commercial maintenance agreements. The Contractor shall be required to provide all hardware and software needed to host, manage, and integrate the solution.

Subtask 3: Provide testing to ensure systems proponents are Section 508 compliant as required under the Rehabilitation Act (29 U.S.C. 794d).

Subtask 4: The contractor is responsible for maintaining and inquiring the licenses, permissions from Freedom Scientific to manipulate JAWS software.

2.1 Non-Personal Services

The Government shall neither supervise contractor employees nor control the method by which the contractor performs the required tasks. Under no circumstances shall the Government assign tasks to, or prepare work schedules for, individual contractor employees. It shall be the responsibility of the contractor to manage its employees and to guard against any actions that are of the nature of personal services, or give the perception of personal services. If the contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the contractor's responsibility to notify the Procuring Contracting Officer (PCO) immediately.

2.2 Business Relations

The contractor shall successfully integrate and coordinate all activity needed to execute the requirement. The contractor shall manage the timeliness, completeness, and quality of problem identification. The contractor shall provide corrective action plans, proposal submittals, timely identification of issues, and effective management of subcontractors. The contractor shall seek to ensure customer satisfaction and professional and ethical behavior of all contractor personnel.

2.3 Contract Administration and Management

The following subsections specify requirements for contract, management, and personnel administration.

2.3.1 Contract Management

The contractor shall establish clear organizational lines of authority and responsibility to ensure effective management of the resources assigned to the requirement. The contractor must maintain continuity between the support operations at DCMA offices in Boston or Philadelphia.

2.3.2 Contract Administration

The contractor shall establish processes and assign appropriate resources to effectively administer the requirement.

The contractor shall respond to Government requests for contractual actions in a timely fashion. The contractor shall have a single point of contact between the Government and Contractor personnel assigned to support contracts or task orders. The contractor shall assign work effort and maintaining proper and accurate time keeping records of personnel assigned to work on the requirement.

2.3.3 Personnel Administration

The contractor shall provide the following management and support as required. The contractor shall provide for employees during designated Government non-work days or other periods where Government offices are closed due to weather or security conditions. The contractor shall maintain the currency of their employees by providing initial and refresher training as required to meet the PWS requirements. The contractor shall make necessary travel arrangements for employees. The contractor shall provide necessary infrastructure to support contract tasks. The contractor shall provide administrative support to employees in a timely fashion.

2.4 Subcontract Management

The contractor shall be responsible for any subcontract management necessary to integrate work performed on this requirement and shall be responsible and accountable for subcontractor performance on this requirement. The prime contractor will manage work distribution to ensure there are no Organizational Conflict of Interest (OCI) considerations. Contractors may add subcontractors to their team after notification to the Procuring Contracting Officer (PCO) or Contracting Officer Representative (COR). Cross teaming may or may not be permitted.

2.5 Contractor Personnel, Disciplines, and Specialties

The contractor shall accomplish the assigned work by employing and utilizing qualified personnel with appropriate combinations of education, training, and experience. The contractor shall match personnel skills to the work or task with a minimum of under/over employment of resources. The contractor shall ensure the labor categories as defined in the Labor Categories document (see attachment), labor rates, and man-hours utilized in the performance of each Task Order (PWS line item) issued hereunder will be the minimum necessary to accomplish the task. The Contractor shall provide the necessary resources and infrastructure to manage, perform, and administer the contract.

2.6 Location and Hours of Work

Accomplishment of the results contained in this PWS requires work to be accomplished at DCMA offices in Boston or Philadelphia. Normal workdays are Monday through Friday except US Federal Holidays.

2.7 Travel / Temporary Duty (TDY)

Travel to other government facilities or other contractor facilities may be required and will be specified in the PWS.

All travel requirements (including plans, agenda, itinerary, or dates) shall be pre-approved by the government, and is on a strictly cost reimbursable basis. Costs for travel shall be billed in accordance with the regulatory implementation of Public Law 99-234 and FAR 31.205-46 Travel Costs.

3 Performance Requirements Provide testing to ensure systems proponents are Section 508 compliant as required under the Rehabilitation Act (29 U.S.C. 794d).

• Provide testing for progressed systems.

• Provide JAWS systems accessibility testing.

• Ensure software is in accordance with current government regulations and industry accessibility standards.

• Provide guidance to ensure products are usable by people with disabilities and Section 508 standards.

Meetings/Information Dissemination: Meetings/Information Dissemination. Participate in meeting with DCMA Programs Manger’s related programs that interact with JAWS. Support information dissemination activities impacting JAWS scripting. These efforts may involve activities such as demonstrations, user’s conferences, user training and briefings relating to DCMA integration issues or programs. Participate in meetings, or on teams related to knowledge sharing of JAWS and related programs.

Minimum Required Hours are as follows:

CLIN Description Qty in

Hours

POP

JAWS SCRIPTWRITING SERVICE FOR DCMA BLIND

PERSON/S

07/08/2016 to 07/07/2017

Option Period 1

1001 JAWS SCRIPTWRITING SERVICE FOR DCMA BLIND

07/08/2017 to 07/07/2018

Option Period 2

07/08/2018 to 07/07/2019

Option Period 3

07/08/2019 to 07/07/2020

Option Period 4

07/08/2020 to 07/07/2021

3.1 Troubleshooting JAWS software and providing technical analysis.

Performance Standards

a) Standard: Meets technical specifications

AQL: Remediation to begin within 24 hours 100% of the time.

b) Standard: Executable

AQL: Maintenance shall not void any warranties

c) Standard: Identifies and corrects deficiencies

d) Standard: Responsive

Deliverables A001 Detail outline of all work accomplished should be submitted with invoice.

3.1.1 New Task

3.1.1.1 The Contractor shall analyze provide testing to ensure systems proponents are Section 508 complaint as required under the Rehabilitation Act (29 U.S.C. 794d) for continuous operation.

a) Standard: Identifies and corrects deficiencies

b) Standard: Records are accurately maintained

c) Standard: Meets technical specifications

3.1.1.1.1 Element Component

3.2 Complete Software Scripting Requirements, Review Provide JAWS systems accessibility testing for continuous operation.

a) Standard: Identifies and corrects deficiencies

b) Standard: Recommendations made are supportable by quantified analysis

• 508 compliance.

• Agreement in accordance with DFARS 208.7402.

• Invoices are to be submitted via Wide Area Work Flow (WAWF). Contact is John F. Hampton at

(804) 734-0199 or John.Hampton@dcma.mil

• Ship Deliverables to:

DCMAIT Attn: Erin Finkes 3990 E. Broad St. BLDG 20 C6S062 Columbus, OH. 43213 Please include the following e-mail address for all software related business.

DCMASoftware@dcma.mil.

• Contractor shall prepare a Software Description Summary (Appendix A) and attach it, as well as an electronic version of the Licensing agreement to the Invoice. Please note: an invoice not including accurate information will be rejected as incomplete.

3.2.1 5. Period of Performance:

The period of performance shall be for one (1) base year of 12 months and four (4), 12-month option years for a total period of performance of 5 years beginning 7/8/2016.

3.2.1 6.Place of Performance:

The work to be performed under this contract will be performed in DCMA offices in Boston or Philadelphia

4 Special Requirements Contractor personnel assigned to this contract must be US Citizens.

4.1 Security and Safety

The Contractor will provide sufficient documentation through their Security Office to the Defense Contract Management Agency Security Office to show favorable adjudication of required investigations

4.1.1 Security

4.1.2 Contractor personnel performing work under this contract must have a favorably adjudicated background investigation to occupy an ADP/IT-II position prior to commencing work on the contract and must maintain the level of security required for the life of the contract.

4.1.3 Assignment to an ADP/IT-II position requires favorable adjudication as stated in DoD 5200.2R and in accordance with the Revised Federal Investigative Standards. Listed below are the categories and associated required investigations:

4.1.4 The contractor will provide sufficient documentation to the DCMA Security Office to show existing favorable adjudication of required investigations. The security investigation (within scope) must have been completed or a current update investigation is in process.

4.1.5 DCMA security personnel will validate proof of existing investigations and adjudications. DCMA Security uses the Joint Personnel Adjudication System (JPAS) to verify investigations. DCMA Security will make every effort to confirm the clearance of vendors not in JPAS; however, timely results are not common and delays would not be considered a reason for a Government caused delay.

4.1.6 New investigative requirements will be processed by DCMA Security Office (Attn: Personnel Security) 3901 A Avenue, Building 10500, Fort Lee, VA 23801. The contractor will ensure contractor support personnel submit the mailto:John.Hampton@dcma.mil mailto:John.Hampton@dcma.mil mailto:DCMASoftware@dcma.mil appropriate security forms in a timely manner to meet performance requirements. Investigations and adjudication processes are time consuming and delays are common, delays in the investigative and adjudicative processes are not considered a reason for a Government caused delay.

4.1.7 To be granted unescorted access to general DCMA spaces and or access to DCMA IT systems the contractor must obtain a DoD issued Common Access Card (CAC). Requirements for proposed contractor recipients of a CAC must first be vetted through his or her employer using the DoD-approved process and the process outlined in the following documents:

• Federal Information Processing Standards Publication 201- 1, "Personal Identity Verification

(PIY) of Federal Employees and Contractors"

• DoD Regulation 5200.2-R, "Personnel Security Program"

• Directive-Type Memorandum (DTM) 08-003- "Next Generation Common Access Card (CAC)

Implementation Guidance"

4.1.8 All CAC holders must minimally have an initiated National Agency Check with Inquiries (NACI) or Tier One (T1) equivalent and a favorable completion of a Federal Bureau of Investigation (FBI) fingerprint check, or a DoD-detem1ined equivalent investigation, or greater. However, Affiliated Volunteers requiring network access are only required to have an initiated National Agency Check with Inquiries (NACI), and a favorable completion of an automated FBI National Criminal History Check (fingerprint check).

4.1.9 When contractor personnel are no longer supporting this contract, the contractor is responsible for ensuring any issued a CAC are returned to the COR for proper disposition.

4.1.10 Access to U.S. Government spaces and computing assets is a privilege, not a right.

Access to these spaces and systems may be monitored at any time. Any violation of established DoD/DCMA policies and procedures could involve the revocation of granted privileges.

4.1.11 Contractor personnel are required to comply with all security policies, procedures and training established in DCMA Security Instructions.

4.1.12. Contractor personnel are required to attend DCMA security training as specified in addition to his/her contractor requirements.

4.1.13. When in DCMA-owned or controlled buildings or other facilities, contractor personnel shall display DCMA-issued identification badges in accordance with DCMA policy.

4.1.14. Lost or misplaced keys, key cards, or badging credentials issued by DCMA must be reported to the local DCMA security representative on the first duty day after the loss is detected.

4.1.15. Data Access

Access To and Use of Government Information: If the Contractor, in the performance of this contract, obtains access to Government owned or controlled information such as plans, policies, reports, studies, financial plans, or data which has not been released or otherwise made available to the public, the contractor agrees that without prior written approval of the Contracting Officer, it shall not: (a) use such information for any private purpose unless the information has been released or otherwise made available to the public; (b) compete for work based on such information until such information is released or otherwise made available to the public; (c) submit an unsolicited proposal to the Government which is based on such information until such information is released or otherwise made available to the public; and (d) release such information unless such information has previously been released or otherwise made available to the public by the Government.

Access To and Protection of Proprietary Information: The Contractor agrees that, to the extent it receives or is given access to proprietary data, trade secrets, or other confidential or privileged technical, business, or financial information

(hereinafter referred to as "proprietary data") under this contract, it shall not use or disclose such information for any purpose other than providing the contract support services, and will not use or disclose the information for any personal or other commercial purpose. The Contractor further agrees to enter into a written agreement for the protection of the proprietary data of others and to exercise diligent effort to protect such proprietary data from unauthorized use or disclosure. A copy of each such written agreement shall be furnished to the Contracting Officer. In addition, the Contractor shall obtain from each employee who has access to proprietary data under this contract, a written agreement (Non- Disclosure Agreement) which shall in substance provide that such employee shall not, during his/her employment by the Contractor or thereafter, disclose to others or use for their benefit, proprietary data received in connection with the work under this Contract.

Data Retention: At the end of the period of performance of this contract, all sensitive/controlled unclassified information (CUI) materials provided to the contractor in support of this contract must be returned to the COR.

4.1.16. Sharing or common use of DCMA user identifications and passwords is strictly prohibited.

4.1.17.

(a) The Contractor shall ensure that personnel accessing information systems have the proper and current information assurance certification to perform information assurance functions in accordance with DoD 8570.01-M, Information Assurance Workforce Improvement Program. The Contractor shall meet the applicable information assurance certification requirements, including-

(1) DoD-approved information assurance workforce certifications appropriate for each category and level as listed in the current version of DoD 8570.01-M; and

(2) Appropriate operating system certification for information assurance technical positions as required by DoD 8570.01-M.

(b) Upon request by the Government, the Contractor shall provide documentation supporting the information assurance certification status of personnel performing information assurance functions.

(c) Contractor personnel who do not have proper and current certifications shall be denied access to DoD information systems for the purpose of performing information assurance functions.

The contractor will provide Name, SSN, and security clearance information for all assigned personnel to show favorable adjudication of required investigations. Contractor personnel will be briefed in accordance with DCMA security policies, given a security awareness exam, and briefed on proper disposition of their passwords (if issued).

Visitor Group Security Agreement. The contractor shall sign a Contractor Visitor Group Security Agreement to protect classified information involved in performance under this contract or Task Order. The Agreement will outline responsibilities in the following areas: Contractor security supervision; Standard Practice Procedures; access, accountability, storage, and transmission of classified material; marking requirements; security education; personnel security clearances; reports; security checks; security guidance; emergency protection; protection of government resources; DD Forms 254; periodic security reviews; and other responsibilities, as required.

4.1.2 Safety

Contractor Compliance: The contractor and its subcontractors shall comply with Public Law 91- 596 (Occupational Safety and Health Act (OSHA)) and the Environmental, Safety, and Occupational Health (ESOH) (DODD 4715.1E).

These requirements shall be incorporated into the contractor’s safety and health program. The Department of Defense (DoD) participates in the OSHA Voluntary Protection Program (VPP). Contractor personnel performing services on a

DoD installation shall participate in the local VPP. Information on the VPP is available at http://www.osha.gov/dcsp/vpp/index.html.

Mishap Notification and Investigation: The contractor and its subcontractors (if applicable) shall promptly report pertinent facts regarding mishaps involving Government property damage or injury to Government personnel and to cooperate in any resulting safety investigation. The contractor shall notify (via telephone) the cognizant contracting officer, the contracting officer’s representative, and/or other applicable members within four (4) hours of all mishaps or incidents. The Government person notified by the contractor will in-turn notify the Safety office.

Contractor notifications made after duty hours shall be reported to the appropriate installation Command Post. If requested by the cognizant contracting officer, the contracting officer’s representative, and/or the cognizant program manager, the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records until released by the investigating safety office. If the Government investigates the mishap, the contractor and the subcontractors shall cooperate fully and assist the Government personnel until the investigation is completed.

The contractor shall be held responsible for all property damage that occurs in conjunction with performance of this contract. This includes but is not limited to damage such as holes, scrapes, marks, stains, etc. to walls and/or ceilings, flooring (i.e. carpet, tile, wood, laminate, etc.), furniture, equipment, etc. The U.S. Government or its representatives shall not be liable for any damages, either to the environment or to property, as a result of the contractor’s work.

4.2 Transition

The contractor shall follow the transition plan submitted as part of the proposal and keep the Government fully informed of status throughout the transition period. Throughout the phase- in/phase-out periods, it is essential that attention be given to minimize interruptions or delays to work in progress that would impact the mission. The contractor must plan for the transfer of work control, delineating the method for processing and assigning tasks during the phase- in/phase-out periods.

4.3 Government Furnished Materials

The Government will make available the materials, office space, communications capability and information on the dates specified as identified in for use by the contractor in the performance of this contract.

4.4 Environmental Requirements

The contractor shall comply with all documents listed below as mandatory and referenced under paragraph 3.0, Performance Requirements. Compliance with documents listed as non-mandatory is the contractors' option.

Mandatory compliance (list) Non

Mandatory document (list)

4.5 Applicable Directives

The contractor shall comply with all documents listed below as mandatory and referenced under paragraph 3.0, Performance Requirements. Compliance with documents listed as non-mandatory is the contractors' option.

Mandatory compliance (list) Non-

Mandatory document (list) http://www.osha.gov/dcsp/vpp/index.html

4.6 Quality

4.6.1 Quality Control

The Contractor shall develop a Task/Delivery Order QCP and maintain an effective quality control program to ensure services are performed in accordance with the IDIQ contract and this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractors QCP is the means by which he assures himself that his work complies with the requirement of the contract.

The finalized QCP will be accepted by the Government at the time of the award of the Task/Delivery Order. The Contracting Officer may notify the Contractor of required modifications to the plan during the period of performance.

The Contractor then shall coordinate suggested modifications and obtain acceptance of the plan by the Contracting Officer. Any modifications to the program during the period of performance shall be provided to the Contracting Officer for review no later than 10 working days prior to effective date of the change. The QCP shall be subject to the Governments review and approval. The Government may find the QCP "unacceptable" whenever the Contractors procedures do not accomplish quality control objective(s). The Contractor shall revise the QCP within 10 working days from receipt of notice that QCP is found "unacceptable."

4.6.2 Quality Assurance Surveillance Plan (QASP)

The Government shall monitor the Contractors performance under this Task/Delivery Order in accordance with the Governments QASP.

5 Deliverables The contractor shall provide deliverables as described in subsequent task orders. Deliverables shall be specified by the government. Format and delivery schedule for deliverables shall be outlined in CDRLs and/or other means TBD.

Number Name Frequency Quantity

A001 Detail outline of all work accomplished should be submitted with invoice.

After invoice is submitted

100%

A001 Detail outline of all work, time spend to accomplish, and submitted with every invoice After invoice is submitted

100%

COMBINED SYNOPSIS/SOLICITATION NOTICE- S5121A-16-R-0010

6 Related Documents The following Documents are related to this project:

Performance Requirement Summary (PRS)

Statements Standards/AQLs Incentive/Remedy

3.1 Troubleshooting

JAWS software and providing technical analysis.

a) Meets technical specifications AQL:

Remediation to begin within 24 hours 100% of the time.

b) Executable AQL: Maintenance shall not void any warranties

c) Identifies and corrects deficiencies AQL: Remediation to begin within 24 hours 100% of the time.

d) Responsive AQL: Remediation to begin within 24 hours 100% of the time.

3.1.1.1 The Contractor shall

analyze Provide testing to ensure systems proponents are Section 508 complaint as required under the

a) Identifies and corrects deficiencies

AQL: Remediation to begin within 24 hours 100% of the time.

Rehabilitation Act (29 U.S.C.

794d) for continuous operation.

b) Records are accurately maintained

c) Meets technical specifications AQL:

Maintenance shall not void any warranties

Statements Standards/AQLs Incentive/Remedy

3.2 Complete Software

Scripting Requirements Review Provide JAWS systems accessibility testing for continuous operation.

a) Identifies and corrects deficiencies AQL: Remediation to begin within 24 hours 100% of the time.

b) Recommendations made are supportable by quantified analysis AQL:

Maintenance shall not void any warranties

This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes/proposals are being requested and A WRITTEN SOLICITATION WILL NOT BE ISSUED.

The solicitation number for this procurement is S5121A-16-0010 and is issued as an unrestricted Request for Proposal. Multiple Awards are NOT possible.

This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005- 88 and DFARS Publication Notice (DPN) 20160607.

Please note the instructions to offerors (located below the CLINs) and submit your quote/proposal as outlined below: (you can also upload an attachment that lists CLIN number, description, quantities, unit of measure, PoP or delivery dates, location, and acceptance)

AMOUNT

IGF::OT::IGF JAWS

Scripting Service FFP JAWS Scripting Service for Boston Blind Person FOB: Destination

PURCHASE REQUEST NUMBER: S5102A6134

NET AMT

OPTION IGF::OT::IGF JAWS

Option Year One JAWS Scripting Service for Boston Blind Person FOB: Destination

Option Year Two JAWS Scripting Service for Boston Blind Person

Option Year Three JAWS Scripting Service for Boston Blind Person

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE

0001 200 Hours

1001 200 Hours

2001 200 Hours

3001 200 Hours

IGF::OT::IGF JAWS

Option Year Four JAWS Scripting Service for Boston Blind Person FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 1001 Destination Government Destination Government 2001 Destination Government Destination Government 3001 Destination Government Destination Government 4001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC

0001 POP 08-JUL-2016 TO

07-JUL-2017

N/A DCMA BOSTON

JOHN HAMPTON

495 SUMMER ST

BOSTON MA 02210-2184

804-734-0199

S5105A

1001 POP 08-JUL-2017 TO

07-JUL-2018

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 08-JUL-2018 TO

07-JUL-2019

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 08-JUL-2019 TO

07-JUL-2020

N/A (SAME AS PREVIOUS LOCATION)

4001 POP 08-JUL-2020 TO

07-JUL-2021

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-3 Gratuities APR 1984

4001 200 Hours

52.203-6 Alt I Restrictions On Subcontractor Sales To The Government (Sep

2006) -- Alternate I

OCT 1995

52.203-12 Limitation On Payments To Influence Certain Federal Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

APR 2014

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-7 System for Award Management JUL 2013 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier Subcontract

Awards

OCT 2015

52.204-13 System for Award Management Maintenance JUL 2013 52.204-16 Commercial and Government Entity Code Reporting JUL 2015 52.204-18 Commercial and Government Entity Code Maintenance JUL 2015 52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

OCT 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.211-6 Brand Name or Equal AUG 1999 52.216-1 Type Of Contract APR 1984 52.217-9 Option To Extend The Term Of The Contract MAR 2000 52.219-8 Utilization of Small Business Concerns OCT 2014 52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013 52.222-3 Convict Labor JUN 2003 52.222-17 Nondisplacement of Qualified Workers MAY 2014 52.222-19 Child Labor -- Cooperation with Authorities and Remedies FEB 2016 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity APR 2015 52.222-35 Equal Opportunity for Veterans OCT 2015 52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014 52.222-37 Employment Reports on Veterans FEB 2016 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards MAY 2014 52.222-42 Statement Of Equivalent Rates For Federal Hires MAY 2014 52.222-43 Fair Labor Standards Act And Service Contract Labor

Standards - Price Adjustment (Multiple Year And Option Contracts)

MAY 2014

52.222-50 Combating Trafficking in Persons MAR 2015 52.222-55 Minimum Wages Under Executive Order 13658 DEC 2015 52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011 52.223-10 Waste Reduction Program MAY 2011 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.228-5 52.232-17

Insurance - Work On A Government Installation Interest

JAN 1997

MAY 2014

52.232-33 Payment by Electronic Funds Transfer--System for Award Management

JUL 2013

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.233-2 Service Of Protest SEP 2006 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.242-13 Bankruptcy JUL 1995 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.203-7996 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation 2016-O0003)

OCT 2015

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

DEC 2015

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

DEC 2015

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

DEC 2015

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.215-7007 Notice of Intent to Resolicit JUN 2012 252.215-7008 Only One Offer OCT 2013 252.222-7007 Representation Regarding Combating Trafficking in Persons JAN 2015 252.225-7001 Buy American And Balance Of Payments Program-- Basic

(Nov 2014)

NOV 2014

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012 252.225-7012 Preference For Certain Domestic Commodities FEB 2013 252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.225-7036 Buy American--Free Trade Agreement--Balance of Payments

Program--Basic (Nov 2014)

NOV 2014

252.225-7048 Export-Controlled Items JUN 2013 252.227-7015 Technical Data--Commercial Items FEB 2014 252.227-7037 Validation of Restrictive Markings on Technical Data JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7010 Levies on Contract Payments DEC 2006 252.239-7009 Representation of Use of Cloud Computing SEP 2015 252.239-7010 Cloud Computing Services AUG 2015 252.239-7017 Notice of Supply Chain Risk NOV 2013 252.239-7018 Supply Chain Risk OCT 2015 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.246-7000 Material Inspection And Receiving Report MAR 2008 252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

Addendum to FAR 52.212-1 Instructions to Offerors—Commercial Items

I. Submission of Offerors:

Offerors must comply with the following:

Quotes/Proposals are to be submitted via email no later than 2:00 p.m. (Eastern Standard Time) on June 29, 2016. The complete quote/proposal, with authorized representative’s signature, must be received by the closing date and time.

The North American Industry Classification System (NAICS) code for this acquisition is 541512, and the Small Business size standard is $27.5 Million. Per FAR 4.1201(a): Prospective contractors SHALL complete electronic annual representations and certifications (Reps & Certs), via the System for Award Management (SAM) website at www.sam.gov. Your Reps and Certs must include the NAICS applicable to this solicitation document and indicate your organization’s business size status.

Per 13 CFR 121.104 - If the size determination is based on average annual gross revenue, the method for determining business size status is based on the company’s average annual gross revenues for the last three fiscal years. Organizations whose average annual gross revenues exceed the size standard of this solicitation are considered large businesses. [Additional definition is available by searching 13CFR121 at http://www.gpoaccess.gov/cfr/index.html]

Complete Contract Line Item Number (CLIN) pricing.

Be registered in www.SAM.gov and have completed the applicable representations and certifications for this requirement and NAICS.

Return the completed combined synopsis solicitation via email to Tammie. Lett-Chalmers@dcma.mil. Any quotes received after the appointed time will be late and may not be considered for award.

The offeror’s Quote/Proposal shall address the following information:

Factor 1 – Technical Capability

Submission Requirements: Capability statement(s) that demonstrates the offeror’s clear understanding of the tasks in the PWS, identifies the potential problems involved in meeting the scope of work requirements, and recommends approaches for their resolution with an emphasis on risk mitigation.

The offeror must be able to provide on-site performance in the following elements of the PWS:

Subtask 1: The contractor shall comply with the appropriate Federal and DoD architectures, programs, standards and guidelines. Specific areas addressed in the PWS are:

• Identify and correct JAWS accessibility issues.

• Provide assistance in converting inaccessible systems into accessible systems.

• Provide custom scripting of assistive technology

• Provide software maintenance for custom (JAWS) Scripting

• Provide remediation for accessibility issues

• Provide on call service and scripting of JAWS software during outages. .

• Configure JAWS software to work with DCMA proprietary systems

• Provide pre-evaluation and follow-up regarding configuring of JAWS software.

• Provide plan to remediate any accessibility issues.

Subtask 2 – Troubleshooting JAWS Software accessibility issues and functional problems. This requires testing of custom Jaws scripts, software, and coordination with end users and may include analyzing the problem, conducting research, working with the user, also coordination with different DCMA software Program managers, preparing documentation related to the problem and resolution.

Subtask 3- The Contractor shall acquire and maintain all necessary commercial, Open Source, and third party hardware and software agreements to include licenses, warranties, and commercial maintenance agreements. The Contractor shall be required to provide all hardware and software needed to host, manage, and integrate the solution.

http://www.gpoaccess.gov/cfr/index.html mailto:Lett-Chalmers@dcma.mil

Subtask 4: Provide testing to ensure systems proponents are Section 508 compliant as required under the Rehabilitation Act (29 U.S.C. 794d).

Subtask 5: The contractor is responsible for maintaining and inquiring the licenses, permissions from Freedom Scientific to manipulate JAWS software.

Factor 2 – Past Performance

Submission Requirements: The offeror shall provide three references that may be contacted to obtain past performance information from the last three years which describes offerors timeliness, quality of work, business relations, and supply chain risk on current or previous contracts. PPIRS reports or other public and non-public sources will be used to evaluate the offerors timeliness, quality of work, and business relations on current or previous contracts. Supply Chain Risk will be evaluated based on reported incidences of sabotage, maliciously introducing unwanted function, or otherwise subverting the design, integrity, manufacturing, production, distribution, installation, operation, or maintenance of a national security system (as that term is defined at 44 U.S.C. 3542(b)) so as to surveil, deny, disrupt, or otherwise degrade the function, use, or operation of such system under previous contracts.

Note: In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance. The offeror shall be determined to have unknown past performance. Unknown” shall be considered acceptable.

Factor 3 – Price

Submission Requirements: The offeror shall submit pricing for each Contract Line Item (CLIN) on the completed combined synopsis solicitation. Pricing shall be provided for each CLIN base period and option period as set forth in the sub CLINS.

For award purposes, the Government will evaluate price for each CLIN by adding together the evaluated price from the associated Sub CLINs for the base and the option periods. Evaluation of the option periods will not obligate the Government to exercise the option. The evaluated price per CLIN will be used as the award amount in the resultant award. Price analysis will be used to determine the total evaluated price to support the selection of the lowest price, technically acceptable offeror.

II. PERIOD FOR ACCEPTANCE OF OFFERS: Reference 52.212-1 Paragraph(c) The Government requires a minimum acceptance period of 90 calendar days in lieu of the 30 calendar days as specified in FAR 52.212-1(c), Period of Acceptance of Offers. The Government will not award a contract to an offeror allowing less than the Government’s minimum acceptance period.

III. Collective Bargaining Agreements: The contractor is required to submit all CBAs applicable to the facility providing service to the requirement location(s). The CBA must be signed and final. If the CBA is currently in negotiation, submit an unsigned copy with the offer; however, the final CBA must be submitted as soon as signed.

IV. ADDITIONAL CLASSES OF SERVICE EMPLOYEES: Reference 52.222-41(c):

The Contracting Officer has identified the classes of service employees anticipated to be employed under the resultant contract in FAR Clause 52.222-42. If the Offeror anticipates employing classes of employees not identified under Clause 52.222-42, or listed under the applicable wage determination, the offeror shall classify the unlisted employee labor categories so as to provide a reasonable relationship between the unlisted labor categories and the listed labor categories in the wage determination, per paragraph (c) of clause 52.222-41. Full definitions of the labor categories are available on the Department of Labor site at http://www.dol.gov/whd/govcontracts/sca.htm, under Guidance, Service Contract Act Directory, 5th Edition.

V. NOTICE OF AWARD:

A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within http://www.dol.gov/whd/govcontracts/sca.htm the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offeror's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

ion)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Factor 1 – Technical Capability

Factor 2 – Past Performance

Factor 3 – Price

Proposals will be evaluated for acceptability, but will not be ranked using the non-price factors. In order to be considered awardable, there must be an “acceptable” rating in every non-price factor. The successful contractor to receive the contract award will be determined using the Lowest Priced Technically Acceptable (LPTA) process.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2016)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision.

(a) Definitions. As used in this provision --

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) ) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

http://www.acquisition.gov/

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an…