S03 RFQ Document.pdf

COMBINED SYNOPSIS/SOLICITATION RFQ 36C24823Q0727

General Information

Action Code: Combined Synopsis Solicitation

Document Type: RFQ

RFQ Number: 36C24823Q0727

Posted Date: 3/9/2023

Response Date: 03/20/2023 by 4:00PM EST

Classification Code: 6640

Set Aside: N/A (Full and Open Competition)

NAICS Code: 325413

Contracting Office Address

NCO 8

ATTN: John H. Shultzaberger

300 East University Ave

Gainesville, FL 3260

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in

FAR Subpart 12.6 in conjunction with Part 13, as supplemented with additional information included in this notice. This procurement is being conducted under Subpart 13.5 Simplified Procedures for Certain

Commercial items. This announcement constitutes the only solicitation for this action. Quotes are being requested, and a written solicitation will not be issued.

This solicitation is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2023-01 Effective

December 30, 2022.

The Network Contracting Office 8-RPO East intends to award a firm fixed priced contract, providing for all supplies, materials, equipment, labor, supervision, management, and transportation, necessary to furnish Histology Cost Per Test testing in accordance with the below Statement of Need (SON) and attached Price Schedule.

Prospective offerors shall be a registered in the System for Award Management (SAM) at http://www.sam.gov to be considered for an award of a federal contract, and registration shall be complete and not missing elements such as representations and certifications.

VENDOR QUESTIONS: All questions regarding this RFQ must be in writing and may be sent by e‐mail to John.Shultzaberger@va.gov. Questions must be received no later than Monday, 03-13-2023 by 10:00 AM Eastern. No further questions will be accepted after that date and time.

ANSWERS TO VENDOR QUESTIONS: Answers to vendor questions will be posted on SAM.gov no later than Tuesday, 03-14-2023 by Close of Business.

mailto:John.Shultzaberger@va.gov

You are reminded that representatives from your company SHALL NOT contact any North Florida/South

Georgia Veterans Health System staff to discuss this RFQ during this RFQ process. All questions and concerns regarding this RFQ shall be directed to John H. Shultzaberger, the Contracting Officer.

QUOTE SUBMISSION: Offers are due on/or before Monday, 03-20-2023 by 4:00 PM Eastern.

Quotes shall be sent by e‐mail “only” to the Contracting Officer (John H. Shultzaberger) at

John.Shultzaberger@va.gov. The Government intends to award a Firm Fixed Priced (FFP) contract resulting from this RFQ.

36C24823Q0727

Table of Contents

COMBINED SYNOPSIS/SOLICITATION RFQ 36C24823Q0727

SECTION A

A.1 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

General Information

Contracting Office Address

Description

VENDOR QUESTIONS

ANSWERS TO VENDOR QUESTIONS

QUOTE SUBMISSION

SECTION B - CONTINUATION

B.1 CONTRACT ADMINISTRATION DATA

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

B.3 DELIVERY SCHEDULE

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES (DEC 2022)

C.2 VAAR 852.212-70 PROVISIONS AND CLAUSES APPLICABLE TO VA

ACQUISITION OF COMMERCIAL ITEMS (APR 2020)

C.3 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020) ... 77

C.4 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

C.5 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (DEC 2022)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

SECTION E - SOLICITATION PROVISIONS

E.1 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2021)

E.2 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS

AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

E.3 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (OCT 2018)

E.4 52.216-1 TYPE OF CONTRACT (APR 1984)

E.5 52.233-2 SERVICE OF PROTEST (SEP 2006)

E.6 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB

1998)

E.7 COMPARATIVE EVALUATION/BASIS FOR AWARD

E.8 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

b. GOVERNMENT:

John H. Shultzaberger, Contracting Officer John.Shultzaberger@va.gov 352-215-5889 Department of Veterans Affairs Network Contracting Office 8 (NCO 8)

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X] 52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or

[] 52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly []

b. Semi-Annually []

c. Other [X] Upon Delivery and Acceptance of Materials/Supplies

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment

Requests.

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO DATE

STATEMENT OF Need

Histology Automation Staining and Tracking System

1. GENERAL: The Contractor shall provide the Name Brand or equivalent Special Stainer, Immunohistochemistry (IHC), In Situ Hybridization (ISH), Hematoxylin and Eosin (H&E) Staining System and Workflow Tracking System at NF/SG Veterans Health System as outlined below. All work is to be performed in accordance with the guidelines established by Federal, State and local ordinances, with the FDA and manufacturer’s guidelines, and with all terms, conditions, provisions, schedules and specifications provided herein.

2. SCOPE: The NF/SG Veterans Health System anticipates the award of a firm, fixed-price contract from this Request for Proposals using commercial item procedures. The NF/SG Veterans Health System plans a Reagent Usage contract for use of the instrument (lease), supplies, installation, training, and service of the equipment (for life of agreement) as identified below.

3. TERM OF CONTRACT: The contract term is for base period beginning date of award thru 09-30-2023 and four options of 12 months.

4. COST-PER-TEST: The contractor is required to furnish NF/SG Veterans Health System, as listed in paragraph 7, the laboratory instrument(s) system(s), reagents to include detection kits for immunohistochemistry (IHC) and for probes/in situ, hybridization (ISH) and reagents for Hematoxylin and Eosin (H&E). Choice of detection kit will be determined based on tests performed simple stains and complex stains as applicable (unless stains excluded below)* necessary to operate the contractor’s equipment, hardware and software upgrades, training for personnel and equipment maintenance necessary to fulfill the test requirements. The NF/SG facility will select the equipment and associated package tailored to its requirements and only will pay for the test assays run on the contractor’s equipment (payment rate is at an established average “cost-per test” figure).

The per-test price includes costs covering (a) equipment use, (b) detection kits, simple stains and complex stains, (c) all necessary maintenance to keep the equipment in good operating condition, (d) operational hardware and software upgrades, (e) user training for government personnel, (f) Business hours service for instrument operation. Contractor is required to provide delivery and installation of equipment at no additional charge, and return shipping costs at end of contract.

5. EQUIPMENT:

The purpose of this solicitation is to identify the salient characteristics of the NAME BRAND OR

EQUIVALENT IHC/ISH Staining System, Special Stainer, H&E Stainer and Workflow tracking system, and specify functionality and performance-based requirements of this system. The proposal shall provide descriptive literature that meets the following specifications:

a. Required Characteristics/ Functionality and Performance Specifications for Special Stainer:

• All the following Special Stains must be fully automated and available at the time of bid: AFB III, Alcian Blue, Alcian Yellow, Congo Red, Elastic/VVG, Giemsa, GMS Fungus, GMS Pneumocystis, Iron, Jones Methenamine Silver H & E, Jones Methenamine Silver Lt. Green, Mucicarmine, PAS

lt. green, PAS diastase, PAS Alcian blue, Reticulum, Steiner, Trichrome Blue and Trichrome Green.

• General instrument characteristics include special stains processing, slide carousel holds 1-20 slides for 25 x 75mm, 1 x 3” or 26 x 76mm superfrost plus, 25 reagent positions, uses NCCLS type II water or equivalent, two bulk fluid containers, bench mounted with 20 liter waste bottle, CSA, CE and Y2K compliant.

• Individual slide staining to eliminate cross-contamination.

• Parallel staining of different tests to allow for faster turnaround time.

• Electrical characteristics 120 VAC plus or minus 10%, 8 amps, 60 Hz.

• Computer system (CPU, Monitor, Keyboard, Printer, Speakers), Ebar label system, software revision upgrade.

• Must have at least 20 slides spaces

• Automation and minimal daily maintenance, with ready to use reagents where possible.

• Customizable staining protocols allowing for optimization based upon facility standards.

b. Required Characteristics/Functionality and Performance Specifications for Immunohistochemical Stainer:

• General instrument characteristics include automated IHC, ISH, FITC, baking, deparaffinization, cell conditioning and staining, 1-20 slides with independent temperature control for 25 X 75mm, 1 x 3: or 26 x 76 mm, 25 reagent position in carousel, uses NCCLS Type II water, up to seven bulk reagents, floor mounted using 20 liter waste bottle, CE and Y2K compliant.

• Physical characteristic include NTE 55 lbs., and 16”x21.5”x13.5”(SM), 20”x21.5”x15”(AFM), and 20”x21.5”x20.5” (BCM).

• Electrical characteristics 120 VAC plus or minus 10%, 4/2amps, 50/60 Hz.

• Computer system (CPU, Monitor, Keyboard, Printer, Speakers), Ebar label system, and software revision upgrade.

• The systems should be barcode driven, random access, have a precision reagent delivery, precision heat induced staining reaction, horizontal kinetic mode Immunohistochemistry, and Chromogenic in situ Hybridization and Special Stains System.

• The systems should be modular, flexible, with the ability to reconfigure modules, and scalable to allow for volume increases in throughput and to fit in limited bench space.

• The systems should utilize self-contained, pre-diluted, Antibodies and Detection kits that are ready to use out of the box.

• Individual slide heating and microcontrolled smart carousel with ambient, 37 and 42 deg. -> 100 deg C in under 3 min. and 100 deg ->37 deg C in under 7 minutes.

• Use no more than 100 uL of reagent per slide.

• Must have at least 30 slide spaces that can each run IHC, ISH, and FITC simultaneously.

• Must be able to run all protocols during the same slide run.

• Must be able to hold 35 reagents for dispensing.

• Must have ability to use detection that is not polymer and does not use AB blocker

• Must be able to run paraffin embedded slides (1 protocol), non-paraffin embedded slides (total of 2 protocols), slides using different type 1 cell conditioning (total of 3 protocols) and/or type 2 cell conditioning (total of 5 protocols) with and without enzyme digestion (total of 7 protocols) and enzyme digestion by itself (total of 8 protocols).

• Must be able to incubate PAbs for up to 2.5 hours

• The self-contained dispenser vials should be environmentally safe. The systems should have a self-contained waste system.

• The systems should utilize flash memory technology and barcodes on dispensers or other similar system to track reagents and for quality control and quality assurance.

• The systems should use Liquid Coverslip, Air Vortex Mixing, and Buffer Jet Slide Washing to include strict protocol timing to assure run-to-run consistency to improve overall staining quality, minimize slide-to-slide variability, and reduce background staining.

• The systems must improve overall productivity in the Histology Lab, reduce need for repeat testing thus reducing reagent waste. The system should not require monitoring during a run and should be 100% “walk-away” system.

c. Required Characteristics/Functionality and Performance Specifications for H&E Stainer:

• One touch complete processing

• Slide identification (without the use of patient identifiers)

• Drying through coverslipping

• Random-access slide processing

• STAT on demand

• Pre-packaged and ready to use reagents with continuous access

• Modular design

• Forward-stocking locations

• Remote system monitoring

• Xylene-free processing

• Discrete slide staining

• Throughput of at least 180 slides/hour

d. Contractor shall provide an upgrade equivalent to the current Ventana XT Immunohistochemical Stainer.

e. Required Characteristics/Functionality and Performance Specifications for Workflow Tracking System

• Tracking that covers key steps in the Histology workflow to include accessioning, staining, pathologist review and sendout.

• Safeguards patient information

• Assists with monitoring workload, problem areas and trends.

• Helps minimize identification errors.

6. General requirements:

The contractor is required to provide new state-of the art equipment. Discontinued models are not acceptable. The contractor will provide all operational upgrades to the equipment hardware and operating system software that materially affects the performance of the equipment, without additional charge to the government. These enhancements to the contractor’s equipment shall be delivered to the government site and installed by the contractor within 60 days of their issuance or date of first commercial availability. Instruments will come with either a warranty for repair within 48 hrs or service agreement included in the CPT.

Note: The C& A Requirements do not apply. A Security Accreditation Package is not necessary.

All models shall perform satisfactorily at any laboratory temperature between 59 and 86 degrees F (15 and 30 degrees Celsius). All models shall perform satisfactorily at any laboratory relative humidity between 10 and 70%. An electronic operator’s manual must be furnished with each model supplied.

Trade-in of existing equipment will be negotiated.

7. Site Preparation:

Specifications shall be furnished in writing by the contractor as part of the equipment proposal. These specifications shall be in such detail as to ensure that the equipment to be installed shall operate efficiently and conform to the manufacturer’s claimed specifications. The government shall prepare the site at its own expense and in accordance with the specifications furnished by the contractor. Any alterations or modifications in site preparation which are attributable to incomplete or erroneous specifications provided by the contractor which would involve additional expense to the government, shall be made at the expense of the contractor.

8. Ownership of Equipment:

Equipment shall remain under the ownership of the contractor. All equipment accessories (hardware are software) furnished by the contractor shall accompany the equipment when returned to the contractor.

The contractor, upon expiration of order(s) at termination and/or replacement of equipment, will remove the equipment. The contractor will disconnect the equipment (gas, water, air, etc.) and will be responsible for all packing and shipping required to remove the equipment within ten business days.

9. Standard and acceptance of performance

Shall begin on the installation date. It shall end on the earlier date of when a certificate of acceptance has been signed or the equipment has met the standard of performance for a period of 30 consecutive calendar days by operating in conformation with the contractor’s technical specification or as quoted in any contract at an effectiveness level of 90% or more. In the event the equipment does not meet the standard of performance during the initial 30 consecutive calendar days, the standard of performance test shall continue a day-by-day basis until the standard of performance is met for a total of 30 consecutive days. If the equipment fails to meet the standard of performance after 90 calendar days from the installation date, the user may, at his/her option, request a replacement or terminate the order upon mutual agreement and in accordance with the provisions of FAR 52.212-4(m) “Contract terms and conditions – Commercial Items, Termination for cause.

Operational use time for performance testing for a system is defined as the accumulated time during which the machine is in actual use. System failure downtime is that period of time when any machine in the system is inoperable due to equipment failure. Downtime for each incident shall start from the time the government makes a bona fine attempt to contact the contractor’s designated representative at the prearranged contact point until the system or machine(s) is returned to the government in proper operating condition.

During the performance period for a system, a minimum of 100 hours of operational use time with productive or simulated work will be required as a basis for computation of the effectiveness level.

However, in computing the effectiveness level, the actual number of operational use hours shall be used when in excess of the minimum of 100 hours. The government shall maintain appropriate daily records to satisfy the requirements of this paragraph and shall notify the contractor in writing of the date of the first day of the successful performance period. Operations use time and downtime shall be measured in hours and whole minutes.

10. Government’s Responsibility:

The user will perform daily routine maintenance and cleaning as required in the manufacturer’s operation and maintenance instructions. The user shall maintain appropriate daily records to satisfy the requirements of this paragraph and shall notify the contractor in writing of the date of the first day of the successful performance period.

11. Training of Operating Personnel:

The contractor shall provide the services of a qualified technical person, at the time of equipment installation and at such time designated by Contracting Officer (CO) or Contracting Officer's Technical

Representative (COTR) to on-site orientation and training to designated personnel in: (1) operation and care of equipment; 2 techniques and procedures recommended by manufacturer to achieve maximum dependable, efficient, and economical utilization of equipment. This training shall include actual demonstration and operation of the equipment including any adjustments or other actions which may be undertaken by operating personnel in the event of failure of equipment, provided that such adjustment or action will in no way jeopardize the Government's rights under contract guarantee clause. This training shall include at least (2) two-day on-site training sessions, all day, upon installation and acceptance of equipment and later, for refresher training. Vendor based training, if necessary for key operators, is the responsibility of the Vendor and will include transportation, meals and lodging.

12. Installation procedures:

The contractor shall be responsible for installation, which consists of in-house delivery, positioning, and mounting of all equipment listed on the delivery order and connections of all equipment and interconnecting wiring and cabling if applicable. Upon receipt of notice to proceed with installation, it shall be the contractor's responsibility to inform the Contracting Officer of any problems which may be anticipated in connection with installation or which will affect optimum performance once installation is completed. In the event that progress of the installation is interrupted through no fault of the contractor, the continuous installation referenced in the preceding paragraphs may be terminated until such time as the cause of delay has been eliminated, and then shall be resumed within 24 hours after the contractor has been notified that work may again proceed.

Upon completion of installation the equipment will be turned over to the hospital for use. Final acceptance of the equipment and installation will be based upon an inspection and test to be performed within ten (10) calendar days from date of installation. If equipment passes inspection or if acceptance inspection is not conducted within ten (10) calendar days from installation, the Government shall accept installation with guarantee date commencing ten calendar days after installation

13. Quality of Reagents, Supplies and Disposables:

The contractor will assure that all supplies provided/ordered for use on their equipment will be of the quality necessary to produce a quality slide product. The reagent quality must be high enough to satisfy proficiency testing standards of the College of American Pathologists (CAP) and the Joint Commission on

Accreditation of Health Care Organizations (JCAHO). In the event that the supplies to include detection kits, stains, and/or consumables are found to be defective and unsuitable for use with the contractor’s equipment or the contractor has failed to comply with the requirements herein, the contractor is required to deliver the supplies within 24 hours of receipt of the verbal order for priority delivery from the government activity. This will be done at no cost to the government, in sufficient quantity as required to allow operation of the contractor’s equipment for one week (under normal government test load volume).

14. Returned goods:

The VA is responsible for inspecting all products shipped hereunder and give the contractor written notice of rejection within thirty (30) calendar days following receipt or installation by the contractor. After acceptance, no products purchased hereunder may be returned without the prior authorization of the contractor and in conformity with their return policy. All returns of non-defective products are subject to a restocking charge. No returns will be authorized after 120 days following shipment to VA.

15. MAINTENANCE:

The contractor shall provide maintenance (labor and parts) to keep the equipment in good operating condition and subject to security regulations. The government shall provide the contractor access to the equipment to perform maintenance services. Preventive maintenance by contractor will provide regular, scheduled maintenance to assure the continued reliable operation of the equipment. These preventive maintenance visits shall be of a frequency that conforms to the manufacturer’s operation and maintenance instructions for the supported equipment. Emergency repairs shall be performed after notification that the equipment is inoperative. The contractor shall provide the government with a designated point of contact and shall make arrangements to enable his maintenance representative to receive such notification.

The contractor will make its best efforts to perform emergency repair service within 48 hours of the time of notification of the malfunction except when an ordering facility elects reduced service at contract agreed reduction. The contractor will provide all parts and labor needed to repair the malfunction. Travel, per diem and other expenses associated with the repair will be borne by the contractor.

The contractor shall furnish a malfunction incident report to the installation upon completion of each maintenance call. The report shall include, as a minimum, the following: (a date and time of notification,

(b) date and time of arrival, (c) serial number type and model number(s) of equipment, (d) time spent for repair, (e) description of malfunction and (f) proof of repair. Parts (e) and (f) shall be written verification of quality control for a sample run.

16. TRAINING AND TECHNICAL SERVICE:

The contractor, without additional charge to the government, shall provide training at a government location for two operating personnel at the time of installation of the contractor’s equipment. Additionally, the contractor, at his/her discretion, may make training available at his/her facility on terms and conditions mutually agreed upon by the agency and the contractor. In addition, the contractor shall provide supplemental operating training to the government personnel, without additional charge to the government, upon installation of the upgrade in equipment hardware or operating system software connected with the operation of an instrument already furnished.

17. PERFORMANCE, DELIVERY, INSPECTION AND ACCEPTANCE: The VA shall require the contractor to deliver the equipment ordered under this contract not later than SIXTY (60) calendar days after receipt of notice of award. The VA reserves the right to thoroughly inspect and investigate the contractor and manufacturer business reputations and other qualifications, and to reject any bid, irrespective of price, that shall be administratively determined lacking in any of the essentials necessary to assure acceptable standards of performance. Acceptance will normally be consummated upon delivery and, when applicable, installation and completion of personnel training. The VA reserves the right to request a ninety (90) day test and evaluation of one or both pieces of equipment prior to placing a delivery order under the contract. If the test and evaluation is not successful as determined by the CO and COTR for that VA, those individual VA’s will not be required to continue with placing a delivery order under this contract, and no default or penalty will accrue.

18. SERVICE: Contractor will make its best efforts to provided Maintenance and other service under guarantee within 48 hours of notice from the Contracting Officer or COTR. Emergency service by a qualified engineer must be provided within 8 working hours of notification. Telephone response does not satisfy this requirement. During the guarantee period, if service needed at other than normal working hours (8:00 am - 5:00 p.m., excluding weekends and holidays), the Government will be charged at an hourly rate which is the prevailing time and materials rate. Otherwise, all services will be performed at no charge to the Government during this period.

19. AVAILABILITY OF SERVICE: The contractor guarantees availability of servicing and replacement parts for a period no less than (5) years from date of award.

20. CONTRACTOR TESTING AND INSPECTION: The Contractor is responsible for performing all inspections and tests necessary to substantiate that the equipment, supplies and services furnished under the contract conform to contract requirements. The VA has the right to test all services ordered under the contract at all times and places throughout the term of the contract. Government testing and inspection will not unduly delay any Contractor work being performed nor will it create a defect in services covered by this contract.

21. REGULATORY REQUIREMENTS: If the product(s) included in this solicitation are considered medical devices by the US Food and Drug Administration, the manufacturer shall be in compliance with the Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder.

22. TECHNICAL INDUSTRY STANDARDS: The contractor certifies that all applicable equipment offered under this contract shall conform to all common industry standards.

23. MANUFACTURED PRODUCTS: Materials furnished shall be of the current productions of manufacturers regularly engaged in manufacture of such items. Approval by Contracting Officer is required of deviation from products and manufacturers as shown in the schedule of items. Shelf-life of all consumables shall be at least ONE YEAR from shipping date unless FDA requires different expiration date.

24. REFERENCE SPECIFICATIONS AND PUBLICATIONS: Where an item is required to conform to certain requirements, conformance shall be evidenced by seal, label, stamp, or approval listing from such agency, or by a certified test report from an independent testing laboratory acceptable to the Government, that the item has been tested and conforms to requirements of referenced agency.

25. RECALLS: If at any time during the term of the contract, the FDA or the Contractor, or subcontractor initiates an item recall or FDA withdraws its approval to manufacture an item, the contractor will issue a notice to indicate the complete item description and identification of the recall with necessary instructions for return for credit or replacement.

26. CONTRACT ADMINISTRATION DATA: The Contracting Officer is the only person authorized to approve changes or modify any of the requirements under this contract. The Contractor shall communicate with the Contracting Officer on all matters pertaining to contract administration. Only the

Contracting Officer is authorized to make commitments or issue changes, which will affect price, quantity, or quality of performance of this contract. In the event the contractor effects any such change at the direction of any person other than the contracting officer, the change shall be considered to have been made without authority and no adjustment will be made in contract price to cover any increase in costs incurred as a result thereof.

27. FAR 52.214-21 DESCRIPTIVE LITERATURE (APR 1984): (a) "Descriptive literature" means information (e.g., cuts, illustrations, drawings, and brochures) that is submitted as part of a bid.

Descriptive literature is required to establish for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as

(1) design; (2) materials; (3) components; (4) performance characteristics; and (5) methods of manufacture, assembly, construction, or operation. The term includes only information required to determine the technical acceptability of the offered product. It does not include other information such as that used in determining the responsibility of a prospective Contractor or for operating or maintaining equipment.

(b) Descriptive literature, required elsewhere in this solicitation, must be (1) identified to show the item(s) of the offer to which it applies and (2) received by the time specified in this solicitation for receipt of bids.

Failure to submit descriptive literature on time will require rejection of the bid, except that late descriptive literature sent by mail may be considered under the Late Submissions, Modifications, and Withdrawals of

Bids provision of this solicitation.

(c) The failure of descriptive literature to show that the product offered conforms to the requirements of this solicitation will require rejection of the proposal.

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM

NUMBE

R

DESCRIPTION OF

SUPPLIES/SERVIC

ES

QUANTIT

Y

UNI

T UNIT PRICE AMOUNT

36.00 EA ________________

Ventana HE600 Bluing OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

MANUFACTURER PART NUMBER (MPN): 06544347001

100.00 EA ________________

Ventana HE600 Cleaning Solution OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 07257538001

40.00 EA ________________

Ventana HE600 Differentiating Solution OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06544339001

50.00 EA ________________

Ventana HE600 Eosin OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06544304001

100.00 EA ________________

Ventana HE600 Hematoxylin OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 07024282001

120.00 EA ________________

Ventana HE600 Organic Solution OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 07095163001

120.00 EA ________________

Ventana HE600 Transfer Fluid OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06544380001

100.00 EA ________________ ________________

Ventana HE600 Wash OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06544312001

16.00 EA ________________

Ventana HE600 Coverslip Activator OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06544312001

30.00 BX ________________

Ventana HE600 Glass Coverslips OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06711138001

1.00 KT ________________

Alcian Blue for PAS OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279194001

8.00 KT ________________

Light Green for PAS OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279267001

Gram Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06890105001

Jones Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279348001

Reticulum II Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 5279399001

6.00 KT ________________

Special Stains GMS II Stain Kit Pack OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 5412749001

3.00 KT ________________

Steiner II Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06521894001

Alc Blue Staining Kit PH2.5 OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279186001

2.00 KT ________________

AFB Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 08432503001

Congo Red Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279429001

Elastic Van Gieson OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 09592229001

Giemsa Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279224001

4.00 KT ________________

Iron Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing

MANUFACTURER PART NUMBER (MPN): 05279259001

Mucicarmine Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279275001

8.00 KT ________________

PAS Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279291001

Trichrome Staining Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06521908001

13.00 EA ________________

BMK Spec Stains Depar Solution OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic

PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 6523102001

8.00 EA ________________

BMK Spec Stains Liquid Coverslip OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06523072001

Special Stains Clean Plus OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06649327001

7.00 EA ________________

Special Stains Cleaning Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279313001

2.00 EA ________________

Steiner Cleaning Kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023

Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279402001

18.00 EA ________________

Benchmark Special Stains Wash II OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 809817001

Diastase kit OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05279208001

1.00 EA ________________

CONFIRM ANTI-ER (SP1) OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05278406001

3.00 EA ________________

CONFIRM ANTI-KI-67 (30-9) OR EQUAL

Contract Period: Base POP Begin: 04-01-2023

PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05278384001

CONFIRM ANTI-P53 (DO-7) OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05278074001

CINTEC HISTOLOGY (250) OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06680011001

10.00 EA ________________

VENTANA H. PYLORI (SP48) PAB OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06425607001

VENTANA ROS1 (SP384) OR EQUAL

Contract Period: Base

POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 08404160001

anti-CD30 (Ber-H2) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 07007841001

Anti-Chromogranin A (LK2H10) PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05267056001

6.00 EA ________________

Anti-Keratin, PAN (AE1/AE3 & PCK26) PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 05267145001

Arginase-1 (SP156) Pab, Cell Marque OR EQUAL

POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06732348001

c-MYC (Y69) PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 06504612001

CD1a (EP3622) PAb, Cell Marque OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0641916000

CD31 (JC70) PAb, Cell Marque OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0546347500

CD71 (MRQ-48) PAb, Cell Marque OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0643316200

CD117(EP10) Rabbit Monoclonal PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0876390900

CD-138 (B-A38) PAb, Cell Marque OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526908300

CDX-2 (EPR2764Y) PAb, Cell Marque OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0546349100

1.00 EA ________________ ________________

Cell Marque, bcl-6 OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526900800

CELL MARQUE, CALCITONIN OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526727700

Cell Marque, Cytokeratin 19 OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526944000

CELL MARQUE, MYELOPEROXIDASE OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526769200

CELL MARQUE, PLAP OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526775700

Cell Marque, PSAP (PASE/4LJ) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526934200

CELL MARQUE, TAG-72 OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526780300

CELL MARQUE, THYROGLOBULIN OR EQUAL

Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526782000

CONFIRM anti-CD3 (2GV6) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0527842200

CONFIRM Anti-CD4 (SP35) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0555273700

CONFIRM anti-CD5 (SP19) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0592990300

CONFIRM anti-CD15 (MMA) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing

MANUFACTURER PART NUMBER (MPN): 0526690400

CONFIRM anti-CD20 (L26) PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526709900

CONFIRM anti-CD23 (SP23) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0547925800

CONFIRM anti-CD34 (QBEnd/10) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0527821000

CONFIRM anti-CD45 (LCA) (RP2/18) PAB OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic

MANUFACTURER PART NUMBER (MPN): 0526691200

CONFIRM anti-CD68 (KP-1) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0527825200

CONFIRM anti-Desmin (DE-R-11) Pab OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0526700500

CONFIRM anti-Melanosome (HMB45) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS CODE: 325413 - In-Vitro Diagnostic Substance Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0547928200

Confirm Anti-PAX5 (SP34) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023

PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 0555272900

CONFIRM ANTI-PSA (polyclonal) OR EQUAL Contract Period: Base POP Begin: 04-01-2023 POP End: 09-30-2023 PRINCIPAL NAICS…