S01 Attachment 1 Product Descriptions ATV UTV.pdf

ATTACHMENT 1 - Product Description

A. All-Terrain Vehicle – 1 each

1. The contractor shall provide and deliver One (1) All- Terrain Vehicle with the following characteristics to the location below.

USDA-NRCS

2226 Highway 14, West Autaugaville, AL 36003

2. The ATV must meet the following specifications:

• Engine: At least 650cc, Gasoline Powered

• Must fit on an enclosed 7x12 utility trailer

• Extended 3 year - warranty

• 30 in. Mud tires

• 14 in. cast-aluminum wheels

• 3,500 lb. winch, front bumper

• Heavy-duty front and rear bumpers

• Mud-riding footrests

• 59 in. wheelbase

• Mudguards

Delivery - Within 60 calendar days after receipt of the delivery order. If cannot meet this delivery provide timeline.

B. Product Description - Utility Terrain Vehicles – 4 each

1. The contractor shall provide and deliver two (2) Utility Terrain Vehicles with the following characteristics to the locations below (one (1) to each location).

USDA-NRCS

175 Ag Science Drive Brewton, AL 36426

USDA-NRCS

207 Faulkner Drive, Suite 107 Bay Minette, AL 36507

1a. UTV’ must meet the following characteristics

• At least 750cc

• Gasoline Powered

• Must fit on an enclosed 7x12 utility trailer

• Extended 3 year- Warranty

• TOP Black HARD Plastic

• WINDSHIELD, DOT safety glass, Balance hinge allowing the lower section to flip up enabling access to front compartment

• Tires, 27x9x12 FR & 27x11x12 REAR- for SideXSide vehicles. 8 Ply rated radial tire , non-directional tread, tough tread, sidewall armor

OR

• Off-road tire, set of 4, for low speed, tubeless tires up to sealing 1/4" of puncture.

OR

• Wheel, 12"; Set of 4 to include mounting and valve stem & lugs including lug nuts.

• Require lift kit

• Lift Kit for Transmission to include front spacer, front heavy-duty springs and lengthened rear shackle.

• CV JOINT GUARDS Set of 2 front - Custom Steel Metal Covers to protect front drive shaft boots from damage.

• SKID PLATE ENGINE - Custom Steel for torque converter housing & drive system to provide protection for engine in rough or rocky terrain.

• Extra protection for the clutch and clutch cover to protect engine electrical parts under the right side of the engine cover.

• Heavy Duty Front Bumper Full Replacement inc 2" Receiver with UVC cut out.

• 4500 LB Winch Wire Cable on front of UTV

• Heavy Duty Bumper

• 36” Universal Jack Mount Adjustable Tube

Delivery - Within 60 calendar days after receipt of the delivery order. If cannot meet this delivery provide timeline.

2. The contractor shall provide and deliver Two (2) Utility Terrain Vehicles with the following characteristics to the locations below (one (1) to each location).

USDA-NRCS

1849 Ross Circle SE Suite 3 Dothan, AL 36301

USDA-NRCS

3381 Skyway Drive Auburn, AL 36830

2a. UTV’ must meet the following characteristics

• At least 750cc

• Gasoline Powered

• Must fit on an enclosed 7x12 utility trailer

• Extended 3 year- Warranty

• Top Black Hard Plastic Windshield DOT safety glass, provide balance hinge to allow the lower section to flip up enabling access to front compartment

• Tire lift kit

• Lift Kit for Transmission to include Front Spacer, front heavy-duty springs and lengthened rear shackle

• Heavy Duty Front Bumper Full Replacement inc 2" receiver (corrected spelling) with UVC cut out.

• 3500 LB Winch Wire Cable on front of UTV

• Heavy Duty Rear Bumper

Delivery - Within 60 calendar days after receipt of the delivery order. If cannot meet this delivery provide timeline.