RFQ Doc.docx

DOCX document 44 KB Posted

Attached to
6515-- SURGICAL Instruments - ENDOSCOPY Federal contract opportunity
Solicitation number
36C26220Q1125
Issued by
Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 22

View the file

Other files for this federal contract opportunity

Other files attached to 6515-- SURGICAL Instruments - ENDOSCOPY, newest first.
File Type Posted
36C26220Q1125.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

This is a combined synopsis/solicitation for commercial supplies/services prepared in accordance with the format in Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a request for quotes under solicitation number: 36C26220Q1125. The acquisition strategy will be a Service Disable Veteran Own Small Business (SDVOSB) set-aside to best meet the needs of the Government.

This is set-aside SDVOSB, there are provisions associated with this procurement.

This request for quotes is for Firm Fix Price applies to this acquisition. Evaluation will be based on low price technically acceptable; meeting brand name product or equal product IAW the outlined salient characteristics.

The Department of Veterans Affairs Los Angeles Healthcare System has a requirement for Endoscopy Supplies. The Contractor shall furnish all supplies/services at:

Department of Veterans Affairs VA Greater Los Angeles Healthcare System Warehouse Bldg. 297 11301 Wilshire Blvd Los Angeles, CA 90073

If interested and are capable of providing the required supplies, please provide the requested information and pricing for the line item as indicated below. Responses to this notice should include: company name, address, point of contact, size of business pursuant to the following questions:

Item
Manufacturer
Description/Part Number*
Unit
Qty
1
Karl Storz
S-SHAPED TISSUE RETRACTORS, 2/SET WIDTH:10MM, LENGTH:17CM 26031SO
EA
6
2
Karl Storz
CLICKLINE PLASTIC HANDLE WITH DISENGAGEABLE RATCHET 33126
EA
45
3
Karl Storz
CLICKLINE PLASTIC HANDLE WITHOUT RATCHET 33121
EA
9
4
Karl Storz
CLICKLINE METAL HANDLE WITHOUT RATCHET 33131
EA
3
5
Karl Storz
CLICKLINE METAL HANDLE WITH HEMOSTAT RATCHET 33133
EA
3
6
Karl Storz
CLICKLINE METZENBAUM SCISSORS INSERT DOUBLE ACTION,CURVED,12MM BLADE,5MMX36CM 34310MS
EA
3
7
Karl Storz
CLICKLINE STRAIGHT SCISSORS INSERT

DOUBLE ACTION JAWS, 5MMX36CM 34310MD

EA
3
8
Karl Storz
CLICKLINE HOOK SCISSORS INSERT NON CROSSING BLADES,5MM X 36CM 34310EK
EA
3
9
Karl Storz
CLICKLINE MANHES TIGER JAW DISSECT/GRASP FCPS INSERT, 2X4 TEETH,SGL ACTN,5MMX36CM 33310MG
EA
3
10
Karl Storz
CLICKLINE REDDICK-OLSEN DISSECT GRASP FCPS INSERT, DOUBLE ACTION, 5MMX36CM 33310UL
PAC
3
11
Karl Storz
CLICKLINE ALLIGATOR GRASPING FORCEPS INSERT, DOUBLE ACTION JAWS, 5MM X 36CM 33310HM
EA
9
12
Karl Storz
CLICKLINE WAVY GRASPING FORCEPS INSERT SGL ACTN HOLLOW JAWS,ATRAUMATIC,5MMX36CM 33310LF
EA
3
13
Karl Storz
CLICKLINE CROCE-OLMI GRASP FORCEP INSERT CURVED ATRAUM FNSTRTD,SGL ACTN, 5MMX36CM 33310CC
EA
3
14
Karl Storz
CLICKLINE DOUBLE ACTION DEBAKEY ATRAUM GRASP FORCEPS INSERT, 5MM X 36CM 33310DYD
EA
3
15
Karl Storz
CLICKLINE ATRAUMATIC GRASP FCPS INSERT FENESTRATED DOUBLE ACTION JAWS, 5MMX36CM 33310K
EA
6
16
Karl Storz
CLICKLINE RIGHT ANGLE DISSECT GRASP FCPS INSERT, DOUBLE ACTION JAWS, 5MM X 36CM 33310R
EA
6
17
Karl Storz
CLICKLINE INSULATED OUTER TUBE, 5MMX36CM 33300
EA
45
18
Karl Storz
KOH MACRO NEEDLE HOLDER W/ERGONOMIC HNDL WITH RATCHET,JAWS CURVED LEFT,5MM X 33CM 26173KL
EA
2
19
Karl Storz
KOH MACRO NEEDLE HOLDER W/ERGONOMIC HNDL WITH RATCHET,JAWS CURVED RIGHT,5MMX33CM 26173KC
EA
2
20
Karl Storz
VASCULAR CROSS CLAMP, AXIAL HANDLE WITH RATCHET, JAW LGTH:5CM, 10MMX30CM 49310VC
EA
4
21
Karl Storz
CLICKLINE PLASTIC HANDLE WITH DISENGAGEABLE RATCHET 33126
EA
10
22
Karl Storz
CLICKLINE INSULATED OUTER TUBE, 5MMX36CM 33300
EA
10
23
Karl Storz
CLICKLINE DOUBLE SPOON GRASP FCPS INSERT ATRAUM MULTI TEETH, DBL ACTION, 5MMX36CM 33310D
EA
2
24
Karl Storz
CLICKLINE BOWEL GRASPER FORCEPS INSERT, FENESTRATED DOUBLE ACTION JAWS, 5MMX36CM 33310C
EA
4
25
Karl Storz
CLICKLINE DEBAKEY NARRW GRASP FRCP INSRT ATRAUMATIC DOUBLE ACTION JAWS, 5MMX36CM 33310DK
EA
4
26
Karl Storz
CLICKLINE INSULATED OUTER TUBE, 5MMX43CM 33400
EA
11
27
Karl Storz
CLICKLINE BOWEL GRASPER FORCEPS INSERT, FENESTRATED DOUBLE ACTION JAWS, 5MMX43CM 33410C
EA
1
28
Karl Storz
CLICKLINE DEBAKEY NARRW GRASP FRCP INSRT ATRAUMATIC DOUBLE ACTION JAWS, 5MMX43CM 33410DK
EA
1
29
Karl Storz
CLICKLINE LONG KELLY DISSECT/GRASP FCPS INSERT, LONG DBL ACTION JAWS, 5MM X 43CM 33410ML
EA
2
30
Karl Storz
CLICKLINE KELLY DISSECTING/GRASPING FCPS INSERT, DOUBLE ACTION JAWS, 5MM X 43CM 33410MD
EA
1
31
Karl Storz
CLICKLINE REDDICK-OLSEN DISSECT GRASP FCPS INSRT,DBL ACTN,JAW DIA:5MM,5MMX43CM 33410UL
EA
1
32
Karl Storz
CLICKLINE MANGESHIKAR GRASP FRCPS INSERT DBL ACTN JAWS W/OUT SERRATION, 5MMX43CM 33410AR
EA
1
33
Karl Storz
CLICKLINE MANGESHIKAR GRASPING FORCEPS INSERT, DBL ACTN, SERRATED JAW, 5MMX36CM 33410AG
EA
1
34
Karl Storz
CLICKLINE ATRAUMATIC DISSECT/GRASP FCPS INSERT, DOUBLE ACTION JAWS, 5MM X 43CM 33410MH
EA
1
35
Karl Storz
CLICKLINE BABCOCK GRASP FORCEPS INSERT FENESTRATED DBL ACTION JAWS, 5MM X 43CM 33410A
EA
1
36
Karl Storz
CLICKLINE METZENBAUM SCISSORS INSERT, 12MM BLADES,CVD DBL ACTION JAWS,5MMX43CM 34410MS
EA
1
37
Karl Storz
MONOPOLAR DISSECTING L-HOOK CANNULA ONLY, 5MM X 43CM 37470DL
EA
1
38
Karl Storz
MODULAR HANDLE FOR COAG AND DISSECTING ELECTRODES, W/O SUCTION/IRRIG CONNECTION 30803
EA
1
39
Karl Storz
S-SHAPED TISSUE RETRACTORS, 2/SET WIDTH:10MM, LENGTH:17CM 26031SO
EA
2
40
Karl Storz
VASCULAR CROSS CLAMP, AXIAL HANDLE WITH RATCHET, JAW LGTH:5CM, 10MMX30CM 49310VC
EA
1
41
Karl Storz
KOH MACRO NEEDLE HOLDER W/AXIAL HANDLE WITH RATCHET, STRAIGHT JAWS, 5MM X 33CM 26173KAF
EA
2
42
Karl Storz
KOH MACRO NEEDLE HOLDER W/ERGONOMIC HNDL WITH RATCHET,JAWS CURVED RIGHT,5MMX33CM 26173KC
EA
1
43
Karl Storz
KOH MACRO NEEDLE HOLDER W/ERGO PISTOL HANDLE, LEFT CURVED JAWS, 5MM X 33CM 26173KPL
EA
1
44
Karl Storz
KOH MACRO NEEDLE HOLDER W/ERGONOMIC HNDL WITH RATCHET,JAWS CURVED LEFT,5MM X 33CM 26173KL
EA
1
45
Karl Storz
CLICKLINE PLASTIC HANDLE WITHOUT RATCHET 33121
EA
2
46
Karl Storz
CLICKLINE PLASTIC HANDLE WITH DISENGAGEABLE RATCHET 33126
EA
11
47
Karl Storz
L-SHAPED, LONG ARTICULATED STAND 5 JOINT FUNCTIONS,HEIGHT 48CM,RANGE 66CM 28272HC
EA
2
48
Karl Storz
C-SHAPED CLAMP ADAPTOR TO CONNECT 28172W POINT SETTER TO METAL HANDLE FLEX SCOPES 28272UL
EA
2
49
Karl Storz
HOLDING SYSTEM SOCKET ONLY F/OPERATING TABLE RAILS, HEIGHT ADJUSTABLE 28172HK
EA
2
50
Karl Storz
S-SHAPED TISSUE RETRACTORS, 2/SET WIDTH:10MM, LENGTH:17CM 26031SO
EA
6
51
Karl Storz
CLICKLINE DOUBLE SPOON GRASP FCPS INSERT ATRAUM MULTI TEETH, DBL ACTION, 5MMX36CM 33310D
EA
6
52
Karl Storz
CLICKLINE ALLIGATOR GRASPING FORCEPS INSERT, DOUBLE ACTION JAWS, 5MM X 36CM 33310HM
EA
6
53
Karl Storz
CLICKLINE REDDICK-OLSEN DISSECT GRASP FCPS INSERT, DOUBLE ACTION, 5MMX36CM 33310UL
EA
6
54
Karl Storz
CLICKLINE KELLY DISSECT/GRASP FORCEPS INSERT, LONG DBL ACTION JAWS, 5MM X 36CM 33310ML
EA
6
55
Karl Storz
CLICKLINE BOWEL GRASPER FORCEPS INSERT, FENESTRATED DOUBLE ACTION JAWS, 5MMX36CM 33310C
EA
6
56
Karl Storz
LICKLINE METZENBAUM SCISSORS INSERT DOUBLE ACTION,CURVED,12MM BLADE,5MMX36CM 34310MS
EA
3
57
Karl Storz
CLICKLINE INSULATED OUTER TUBE, 5MMX36CM 33300
EA
33
58
Karl Storz
CLICKLINE PLASTIC HANDLE WITH DISENGAGEABLE RATCHET 33126
EA
33
59
Karl Storz
HOLDING SYSTEM SOCKET ONLY F/OPERATING TABLE RAILS, HEIGHT ADJUSTABLE 28172HK
EA
2
60
Karl Storz
HOLDING SYSTEM SOCKET ONLY F/OPERATING TABLE RAILS, HEIGHT ADJUSTABLE 28172HK
EA
2
61
Karl Storz
CLAMPING JAW W/BALL JOINT, LRG 16.5-23MM F/INSTRUMENTS & KS HOLDING ARMS ON 28272UGK
EA
2
62
Karl Storz
CLICKLINE ROTATING WHEEL, AUTOCLAVABLE,33120
EA
2

NOTE: Potential offers must be aware that the items being acquired are procured as Brand Name or Equal. For those items that are “or equal”, a description of the salient characteristics outlined below. The FAR Clause 52.211-6 Brand Name or Equal applies to this acquisition. Any items quoted as equal not confirming to the requirements of clause 52.211-6 will be considered non- responsive and not considered for award.

Salient Characteristics

· Must be medical grade instrumentation and FDA approved.

· Must have interchangeable design that allows standardization for multiple surgical applications

· Must be compatible and interchangeable with Karl Storz laparoscopic instrumentation currently in use at the VAMC W LA

· Must be of precision craftsmanship and provide a solid feel with superior distal tip response for patient safety.

· Must come in insulated and non-insulated, metal with Luer-Lock connector and plug

· Must come with CM marking on Luer-Lock connector and plug

· 1-year manufacturer’s warranty

The information identified above is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the brand name or equal to supplies being requested.

Vendor Requirements:

1. Vendor shall provide delivery (Destination)

2. Vendor shall provide manufacture standard warranty on the product starting from the first day of delivery.

3. The pricing terms and conditions of the quotation shall be valid for at least 90 days unless a longer time is stated in the quote.

4. All Items quoted must be new.

1. WARRANTY

Vendor shall provide standard warranty for these products.

1. DELIVERY

Vendor must deliver to VA Los Angeles Hospital.

Delivery 30 Days, After Receipt of Order (ARO)

1. INSPECTION AND ACCEPTANCE

The VA Los Angeles personnel will inspect the equipment to ensure serviceability and condition.

1. GRAY MARKET ITEMS

No remanufactures or gray market items will be acceptable. Vendor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other documents from the OEM.

CLAUSES INCORPORATED BY REFERENCE

FAR Clause 52.204-10Reporting Executive Compensation and First-Tier Subcontract
Awards.Oct 2016
FAR Clause 52.209-6Protecting the Governments Interest When Subcontracting with
Contractors Debarred, Suspended, or Proposed for Debarment.Oct 2015
FAR Clause 52.212-4Contract Terms and Conditions -- Commercial Items.Jan 2017
FAR Clause 52.212-5Contract Terms and Conditions Required To Implement
Statutes or Executive Orders—Commercial Items.Jul 2018
FAR Clause 52.219-28Post-Award Small Business Program Rerepresentation.Jul 2013
FAR Clause 52.222-26Equal Opportunity.Sep 2016
FAR Clause 52.222-36Equal Opportunity for Workers with Disabilities.Jul 2014
FAR Clause 52.225-1Buy American – SuppliesMay 2014
FAR Clause 52.225-13Restrictions on Certain Foreign Purchases.Jun 2008

CLAUSES INCORPORATED BY FULL TEXT

FAR 52.212-1, Instructions to Offerors – Commercial

Applies to this acquisition and the following addenda to the provision.

(a) The Offeror’s quotation shall be submitted electronically to the Points of Contact identified in the combined synopsis/solicitation announcement by the date and time indicated.

(b) As part of your quote submission you are required to include price information. DUNS, Cage Code, tax ID, terms and conditions and Buy American Act Certificate required in clause 252.225-7000, as applicable.

(c) All firms must be registered in SAM at https://www.sam.gov at time of quote submittal in order to be considered for award. Please provide quote expiration date and best delivery schedule.

FAR 52.212-2(a) Evaluation—Commercial Items (Oct 2014)

Applies to this acquisition. Evaluation will be based on low price technically acceptable; meeting brand name product or equal product IAW the outlined salient characteristics.

The Government reserves the right to award without discussions. Therefore, each initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if determined necessary by the Contracting Officer.

FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items (Oct 2018)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u)) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(6) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(7) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It [_] has, [_] has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that --

(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American – Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Supplies.”

(2) Foreign End Products:

LINE ITEM NO. COUNTRY OF ORIGIN

____________________________________
____________________________________
____________________________________

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html
http://www.va.gov/oal/library/vaar
FAR Number
Title
Date
52.219-6
NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE
NOV 2011
52.246-2
INSPECTION OF SUPPLIES -FIXED PRICE
AUG 1996
852.203-70
COMMERCIAL ADVERTISING
JAN 2008
852.246-71
REJECTED GOODS
OCT 2018
852.209-70
ORGANIZATIONAL CONFLICTS OF INTEREST
JAN 2008
852.211-70
SERVICE DATA MANUALS
NOV 1984
852.215-71
EVALUATION FACTOR COMMITMENTS
DEC 2009
852.219-10
VA NOTICE OF TOTAL SERVICE-DISABLE VETERAN OWNED SMALL BUSINESS SET-ASIDE
JUL 2016

(DEVIATION)

852.232-72
ELECTRONIC SUBMISSION OF PAYMENT REQUESTS
NOV 2012
852.237-70
CONTRACTOR RESPONSIBILITIES
APR 1984

The solicitation will be in accordance with FAR Part 12, 13, and 19, Acquisition of Commercial Items, Simplified Acquisition Procedures, Small Business Programs, and Veteran Affairs Acquisition Regulations as supplemented with additional information in this notice. The North American Industrial Classification System (NAICS) code for this requirement is 339113 Size Standard 750 Employees. The Contractor shall adhere to all federal and state laws and regulations in effect during the term of this contract.

The Government intends to award a firm-fixed-price contract. The Contract begins on the date of award. Quotes are to be received no later than: August 4, 2020 at 9:00AM PST. NO ADDITIONAL TIME WILL BE GIVEN, LATE QUOTES WILL NOT BE ACCEPTED, Offerors are advised that it is your responsibility to review and monitor the website frequently to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to Carlos Magana, Contracting Specialist at Carlos.Magana@va.gov with “36C26220Q1125” in the subject line within 48 business hours of release of this notice. Telephone inquiries shall not be accepted. Inquiries after the allotted period may not be responded. All offerors must be registered in www.sam.gov to do business with the Government. Ensure your registration is correct, current and has not expired. Please include your DUNS number on your quote.

File details come from the government source that posted it. Updated .