Requirements Document.pdf

Win 10 Inertial Platform Upgrades (53X, 53Y, T500, 120” Centrifuge)

Requirements Document

For

704th Test Group/746th Test Squadron

1.0 PURPOSE

The 704th Test Group (704 TG) mission is to be the premier provider of unique test and evaluation capabilities relevant to tomorrow’s warfighter through world-class people improving technical excellence, cost-effectiveness, and agility. The 746th Test Squadron (746 TS) is assigned to the 704 TG. The 746 TS conducts Global Positioning System denial and Inertial Navigation System (INS) testing. Four key assets in conducting inertial testing are the 53Y, 53X, the T500 rate tables, and the 120” Centrifuge. The 746

TS need these assets’ ACUTROL controllers upgraded to Windows 10 in order to meet mission requirements.

The 746 TS uses the rate tables and centrifuge to establish baseline performance, conduct bench-top physical and functional testing and conduct INS calibration validation. The utilization of these assets reduces customer program cost and schedule by identifying and correcting problems early, reducing risk to more intensive high cost testing. They are also used in independent government testing to verify and validate the performance of an inertial unit’s suitability for entry into the next stage of research and development and eventual use in a more complex system. The upgrade to these systems is required to avoid delays and cost overruns of government sponsored test programs.

2.0 SCOPE

The contractor shall provide equipment and labor to accomplish upgrading the 53Y, T-500 and 120”

Centrifuge’s ACUTROL 3000e from Windows 7 to Windows 10 based on Acutronic USA, Inc. technical data and requirements.

The contractor shall deliver a new ACUTROL 3000e with Windows 10 for the 53X rate table. The

Government will install this equipment.

Requirements below:

2.1 Upgrade three (3) each existing ACUTROL 3000e controllers from Windows 7 to Windows 10 on the

53Y, T-500, & 120” Centrifuge

2.2 Provide one (1) new ACUTROL 3000e controller with Windows 10 for 53X rate table with one (1)

IEEE-488 interface and one (1) external BNC panel

3.0 MILESTONES

The contractor shall deliver the software upgrades and the new 53X controller with Windows 10 no later than 31 Oct 2020, FOB Destination.

4.0 DELIVERABLES

The contractor shall deliver all hardware and documentation to 746 TS at 1644 Vandergrift Rd

Holloman AFB, NM 88330.