Requirements and Specifications.pdf

R

Requirements / Specifications: High-speed real-time oscilloscope 1 Version 1.0 (2019) Double-click on for further assistance.

Use this document to detail specifications/requirements for an item and/or ancillary services.

TITLE: High-speed real-time oscilloscope Requesting Lab/Division/Group: Physical Measurement Laboratory (PML), Applied Physics Division 686, Spin Electronics Group (Group 12)

General Statement of Need We are in need of a high-speed real-time oscilloscope for detailed superconducting circuit performance measurements to be used in conjunction with our scanning superconducting quantum interference device microscope.

Items and/or Ancillary Services

Item 1: High-speed real-time oscilloscope Quantity: 1 Specifications: Specification 1.1: minimum 20 GHz real-time analog bandwidth, with 4 analog channels Specification 1.2: at least 128 GSa/s maximum sampling. Specification 1.3: range from at most 1 mV/div to at least 1V/div displayed sensitivity. Specification 1.4: minimum hardware sensistivity 32 mV or less full scale. Specification 1.5: maximum hardware sensistivity 8 V or more full scale. Specification 1.6: vertical resolution at least 10 bits / 14 bits with averaging. Specification 1.7: rise/fall time 22ps (10-90%).

Specification 1.8: Specification effective number of bits 5.8 or more at 40 mV (full scale) at 20 GHz.

Specification 1.9: RMS noise floor less than 200 microVolts on most sensitive range. Specification 1.10:

main timebase 2ps/div or less to 20 s/div or more real-time. Specification 1.11: Inter-channel intrinsic jitter less than 10 fs rms. 1.12: Intrinsic jitter 15 fs rms or less with 100 ns/div range. Specification 1.13:

maximum memory segments at least 25,000. Specification 1.14: real-time averaging up to at least 1,000,000

Separately Priced Options and Services:

Item 2: N/A Quantity: [Enter quantity here.] Specifications: [Enter quantity here.]

Click or tap here to enter text.

Service Requirements / Item Specifications

Section Requirements/Specifications Planning Considerations ☒ N/A

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain requirement here] ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote]

Requirements / Specifications: High-speed real-time oscilloscope 2

Shipping & Delivery ☐ N/A

[Enter shipping and delivery information by item here.] Shipping criteria:

☐ Partial delivery acceptable ☐ Direct delivery to building required [Explain need for requirement here] Building has: ☐ Loading dock ☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here] Delivery date criteria:

☒ Delivery of goods, installation, and training shall be completed no later than: 8 weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements]

Electronic Media ☒ N/A

[Enter electronic media requirements by item here.] ☐ Software ☐ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here]

Installation ☒ N/A

[Enter installation requirements by item here.] ☐ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☐ Equipment set up ☐ Start-up services ☐ Turn key installation ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point.

Facility / Utility Considerations ☒ N/A

[List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s) [List any Work Order Number(s) here] ☐ Power available Voltage: 200 (V) Max Current: 50 (A) Phase: Three phase Frequency: 60 (Hz) NEMA Plug Type: Unknown (i.e.: NEMA L5-20P) Environment: Common Lab / Office Environment Other power consideration: [List any other power considerations here] ☐ Utility connections: Cooling water, 6-9L/min @ 5-25C ☐ Other considerations: Click or tap here to enter text.

Requirements / Specifications: High-speed real-time oscilloscope 3

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included?

☐ Labor ☐ Parts ☐ Travel ☐ Cost and liability for returns ☐ Other: [Enter other requirements here] ☐ Warranty length: Click or tap here to enter text.

Period Length:[Ex. month, 6 month, year etc.]

Training ☒ N/A

[Training requirements (who, when, what, where) here. If on-site, is travel necessary?] ☐ On-site ☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training:

☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety ☐ Other: [Enter other scope requirements here] ☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point.

Inspection and Acceptance ☐ N/A

[Enter inspection requirements per item here] ☒ Planned government acceptance testing (7 business days) ☐ Gov’t acceptance expected to take longer than 7 business days: 21 business days ☐ Inspection and acceptance plan: Before inspection can occur, requires installation which may take as much as 2 weeks.

☐ Other: [Enter other requirements here]

Maintenance ☒ N/A

[Describe your maintenance requirements per item here] Period Length: [Ex. month, 6 month, year etc.] What is included?

☐ Labor ☐ Spare parts ☐ Consumables ☐ Travel ☐ Cost and liability for returns ☐ Software updates ☐ Manuals ☐ Service plan length: [Enter service plan length here] ☐ Other: [Enter other requirements here] ☐ Requirements: [Enter requirements here] (i.e.: onsite within 72 hours, etc.)

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment

[List any government furnished material/equipment per item here] ☐ Samples for testing ☐ Government equipment which will leave gov't site (TPOC must coordinate with division property custodian)

Requirements / Specifications: High-speed real-time oscilloscope 4

☒ N/A Serial Number: [Enter Serial Number here] Description: [Enter description here] NIST property number: [Enter NIST property number here] ☐ Other: [Enter other details here]

Travel ☒ N/A

[Describe any travel requirements per item here] ☐ Explain: [Explain here] ☐ Other: [Enter other requirements here] Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.). Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Provide suggestions to improve this form by clicking here.

https://oaam.nist.gov/OAAMAcquisitions/FormFeedback/default.aspx