RECOMMENDED QUALITY ASSURANCE PROVISIONS.pdf

RECOMMENDED QUALITY ASSURANCE PROVISIONS

AND SPECIAL INSPECTION REQUIREMENTS

1. PR / MIPR NUMBER

2. NATIONAL STOCK NUMBER

5841013191380FW

3. POINT OF INSPECTION

SOURCE DESTINATION

X

SEE DFARS 246.402

4. POINT OF ACCEPTANCE

SOURCE DESTINATION

X

5. ITEM MANAGER / PHONE

6. EQUIPMENT SPEC / PHONE

Watts, Terry / 405-736-8786

7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS

CERTIFICATE OF CONFORMANCE

FAR 52.246-15

CONTRACT RESPONSIBILITY

FOR INSPECTION

FAR 52.246-1

STANDARD INSPECTION

FAR 52.246-2,-3,-4,-5 OR -6

AS APPLICABLE TO CONTRACT

X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

AS 9100

COMMERCIAL ITEM INSPECTION

FAR 52.212-4

OTHER (Describe in Block 8)

8. REMARKS

Dodgion, Roland KNAME: 21 NOV 2019DATE:

Noun: Receiver Transmitter

Source is defined as the site of actual manufacturer, whether or not the prime contractor is the actual manufacturer.

A quality system compliant with AS9100 or ISO 9001:2015 is acceptable.

Compliance is demonstrated by certification or third party audit findings, i.e. a DCMA QMS audit.

REMINDER: Per DFAR 246.202-4 Higher-level Contract Quality Requirements

(1) Are used in ADDITION to a standard inspection requirement.

(2) Are listed, including nongovernment quality system standards adopted to meet DoD needs, in the DoD Index of Specifications and Standards.

Special processes shall be performed by organizations maintaining NADCAP approval for the relevant special process. See drawing 20145214 for NADCAP processes.

Thompson, Ryan DNAME: 16 OCT 2014DATE:

Noun: RECEIVER-TRANSMITTE

Source is defined as the site of the actual manufacturer, whether or not the prime contractor is the actual manufacturer.

A quality system compliant with AS9100 or ISO 9001:2008 is acceptable.

Compliance is demonstrated by certification or third party audit findings, such as from a DCMA QMS audit.

REMINDER: Per DFAR 246.202-4 Higher-level Contract Quality Requirements

(1) Higher-level contract quality requirements are used in ADDITION to a standard inspection requirement.

(2) Higher-level contract quality requirements, including nongovernment quality system standards adopted to meet DoD needs, are listed in the DoD Index of Specifications and Standards.

All special processes shall be performed by organizations maintaining NADCAP approval for the relevant special process. See drawing 20145214 for a list of NADCAP processes.

Le, David DNAME: 27 MAR 2009DATE:

Technical data is NOT available for review to determine ODS usage. See attachment to ensure contractor(s) complies with DOD ODS requirements.

8a. OZONE DEPLETING SUBSTANCES (ODS)

STATEMENT

"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN

ONLY BE MET BY THE USE OF A CLASS I ODS."

X WAIVER (SEE AF FARS 5323)

NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.

Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 10 Aug 2020

RECOMMENDED QUALITY ASSURANCE PROVISIONS

AND SPECIAL INSPECTION REQUIREMENTS

1. PR / MIPR NUMBER

2. NATIONAL STOCK NUMBER

5841013191380FW

9. QUALITY PRE-AWARD SURVEY

YES NEW SOURCE

X PREVIOUS SOURCEX NO

AFMC PARTICIPATION

RECOMMENDED

10. CODES

A. I&A

B. CQR

G

11. SIGNATURE OF TECHNICAL AUTHORITY

Le, David D

ORGANIZATION / SYMBOL

424 SCMS / GUEA

PHONE

405-736-5031 / 336-5031

DATE

22 NOV 2019

Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 10 Aug 2020