IPDS.QSDM.K6.131640A.8.1.13.doc

ITEM PURCHASE DESCRIPTION

General Services Administration

ITEM PURCHASE DESCRIPTION QSDM-K6-131640-A

1. 5180-00-051-5024 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

See Components: 7 components, must bid on the entire kit as follows: 1.1 – 1.7, you may not bid on the individual components of the kit.

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-051-5024:

1.1. 5120-00-861-1170 Qty: 1 UI: EA

INSERTER, SCREW THREAD INSERT

DESCRIPTION

Type III: Inserter, Screw Thread Insert

Class 1: Prewinder

Style A: Threaded mandrel prewinder inserting tools for 1/2 (.500) inch and smaller unified coarse and fine screw thread inserts.

Thread Size And Series: 1/2-13 UNC.

See Technical Specifications paragraph(s): T1.3 and T2.1.

1.2. 5120-00-544-9174 Qty: 1 UI: EA

TANG BREAKOFF TOOL, SCREW THREAD INSERT

DESCRIPTION

Type IV: Tang break-off tools

Class 2: (1/2 (0.500) inch and smaller unified coarse and fine threads, plain punch)

Thread Size: 1/2 (0.500) inch

See Technical Specifications paragraph(s): T1.3 and T2.1.

1.3. 5120-00-251-1527 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator:: 7/16(.4375) inch to 1(1.000) inch (UNC or UNF)

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

1.4. 5136-00-876-8910 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Class 1: Finishing, plug style

Thread Size and Series: 1/2-13 STI UNC - 3B

Thread Pitch Diameter: (H3) 0.5509/ 0.5514 inch

Starting Chamfer Type: Plug

Thread Forming Method: Ground

Style: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

1.5. 5140-00-935-0719 Qty: 1 UI: EA

TOOL BOX, PORTABLE

DESCRIPTION

Type VI: Thread Repair Kit module tool box

Size: 3

Overall length: 8.625 Inches

Overall Height: 7.375 Inches

Overall Width: 1.438 Inches

Handle Quantity: 1

Handle Location: Right End Surface

Closing Facility Type and Quantity: Friction Catch

Special Features: Tool Holding Clips

Material: Steel

Surface Treatment: Enamel, MIL-E-15090, Type 3, Class 2

See Technical Specifications paragraph(s): T1.3 and T2.1.

1.6. 5325-00-290-4504 Qty: 6 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM122116 through NASM122155 dated 03/31/98;

Part Number: MS122125; Thread size: 1/2(.500)-13 UNC.

1.7. 5325-00-814-9865 Qty: 6 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM21209 dated 4/30/98; Dash No. C8-15;

Thread size: 1/2(.500)-13UNC.

End of 5180-00-051-5024 Components List

2. 5180-00-051-5025 UI: KT

TOOL KIT, SCREW THREAD INSERT

4 components, must bid on the entire kit as follows: 2.1 – 2.4, you may not bid on the individual components of the kit.

DESCRIPTION

Additional Components

Type III: Inserting tool, screw thread inserts

Class 2: Mandrel tools

Style B: 9/16 inch through 1-1/2 inch unified coarse threads

Thread Size /Series: 3/4-10 UNC

Quantity: 1 each

Commercial Item Description A-A-59158

Type I: Tap, thread cutting

Class 1: Finishing, plug style

Tap, Thread Cutting, Finishing Plug Style, H3

Thread size 3/4 -10 UNC

Quantity: 1 each

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-051-5025:

2.1. 5120-00-251-1527 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator:: 7/16(.4375) inch to 1(1.000) inch (UNC or UNF)

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

2.2. 5340-00-045-2812 Qty: 4 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with Military Standard MS122116 through MS122155 Revision D dated 02/24/76, Part Number MS122128; Thread size - 3/4(.750)-10 UNC.

2.3. 5340-00-723-6779 Qty: 4 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with Military Standard MS21209E dated 02/21/78; Dash No. C1215; Thread size - 3/4(.750)-10 UNC.

2.4. 5140-00-935-0719 Qty: 1 UI: EA

TOOL BOX, PORTABLE

DESCRIPTION

Type VI: Thread Repair Kit module tool box

Size: 3

Overall length: 8.625 Inches

Overall Height: 7.375 Inches

Overall Width: 1.438 Inches

Handle Quantity: 1

Handle Location: Right End Surface

Closing Facility Type and Quantity: Friction Catch

Special Features: Tool Holding Clips

Material: Steel

Surface Treatment: Enamel, MIL-E-15090, Type 3, Class 2

See Technical Specifications paragraph(s): T1.3 and T2.1.

End of 5180-00-051-5025 Components List

3. 5180-00-054-7506 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Tools for inserting and extracting heli-coil wire screw thread inserts. One extractor, one inserter, One tang break off tool, 2 taps, 60 inserts. Thread series 4(.112 inches)-40 UNC.

Add the following component to listing:

A. Type IV, Class 2 - Tang break-off tools, plain punch; Thread size: 4(.112)-40. Qty. 1

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-054-7506:

3.1. 5120-00-816-5703 Qty: 1 UI: EA

INSERTER, SCREW THREAD INSERT

DESCRIPTION

Type III: Inserting tool, screw thread inserts

Class 1: Prewinder tools

Style A: Threaded mandrel prewinder inserting tools for 1/2 inch and smaller unified coarse and fine threads.

Thread Size/Series: 4-40 UNC.

Emhart Teknologies P/N 7551-04 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): T1.3 and T2.1.

3.2. 5120-00-245-9539 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series: 3 to 8 UNC or UNF.

See Technical Specifications paragraph(s): T1.3 and T2.1.

3.3. 5136-00-825-7136 Qty: 2 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type I: Tap thread cutting

Class 1: Finishing, plug style

Thread Size and Series: 4-40 STI UNC - 3B

Thread Pitch Diameter: (H1) 0.1283/ 0.1288 inch

Starting Chamfer Type: Plug

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 3

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

3.4. 5140-00-935-0720 Qty: 1 UI: EA

TOOL BOX, PORTABLE:

DESCRIPTION

The tool box shall consist of a body, lid handle and friction catch

Type VI: Thread Repair Kit module tool box

Size: 4.

Overall Length: 8-5/8 inch

Overall Height: 15/16 inch

Overall Width: 3-5/8 inch

Material: steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

3.5. 5325-00-842-5920 Qty: 15 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM122116 through NASM122155 dated 1998;

Part Number: MS122116; Thread size: 4(.112)-40UNC.

3.6. 5325-00-631-7894 Qty: 15 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM21209-1998; Dash No. C0415;

Thread size: 4(.112)-40 UNC.

3.7. 5325-00-825-8215 Qty: 15 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM122156 through NASM122195-1998;

Part Number: MS122156; Thread size: 4(.112)-40UNC.

3.8. 5325-00-827-4024 Qty: 15 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aeronautical Standard NASM21209-1998; Dash Number C0420;

Thread size: 4(.112)-40UNC.

End of 5180-00-054-7506 Components List

4. 5180-00-054-7513 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Thread Series: 3/4(.750)-16UNF, STI

See Components:

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-054-7513:

4.1. 5120-00-244-1720 Qty: 1 UI: EA

INSERTER, SCREW THREAD INSERT

DESCRIPTION

Type III: Inserter, Screw Thread Insert

Class 1: Prewinder Tools

Style B: 9/16 inch through 1-1/2 inches unified fine threads and metric spark plug threads

Thread Size And Series: 3/4-16 UNF.

See Technical Specifications paragraph(s): T1.3 and T2.1.

4.2. 5120-00-251-1527 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator:: 7/16(.4375) inch to 1(1.000) inch (UNC or UNF)

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

4.3. 5136-00-825-7107 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type I: Tap, thread cutting

Class 1: Finishing, plug style

Style: Straight flute

Nominal Thread Size: 3/4-16 STI UNF - 3B

Thread Pitch Diameter: 0.7916 to 0.7921 inch (H3)

Thread Forming Method: Ground

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

4.4. 5140-00-935-0719 Qty: 1 UI: EA

TOOL BOX, PORTABLE

DESCRIPTION

Type VI: Thread Repair Kit module tool box

Size: 3

Overall length: 8.625 Inches

Overall Height: 7.375 Inches

Overall Width: 1.438 Inches

Handle Quantity: 1

Handle Location: Right End Surface

Closing Facility Type and Quantity: Friction Catch

Special Features: Tool Holding Clips

Material: Steel

Surface Treatment: Enamel, MIL-E-15090, Type 3, Class 2

See Technical Specifications paragraph(s): T1.3 and T2.1.

4.5. 5325-00-655-7971 Qty: 4 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM 124691 through NASM 124730 dated 12/99; Part Number MS124703; Thread size: 3/4(.750)-16UNF.

4.6. 5325-00-723-6780 Qty: 4 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM21209 dated 04/30/1998; Dash No. F1215; Thread size: 3/4(.750)-16UNF.

End of 5180-00-054-7513 Components List

5. 5180-00-054-7514 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Thread Size: 5/8(.625)-11 UNC

See Components:

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-054-7514:

5.1. 5120-00-804-6052 Qty: 1 UI: EA

INSERTER, SCREW THREAD INSERT

DESCRIPTION

Type III - Inserting tool, screw thread inserts;

Class 2 - Mandrel tools;

Style B: 9/16 (.5625) inch through 1-1/2 (1.500) inches unified coarse threads.

Thread Size And Series: 5/8 (0.625) -11UNC..

See Technical Specifications paragraph(s): T1.3 and T2.1.

5.2. 5120-00-251-1527 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator:: 7/16(.4375) inch to 1(1.000) inch (UNC or UNF)

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

5.3. 5136-00-884-3909 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type I: Tap, thread cutting

Class 1: Finishing, plug style

Thread Size and Series: 5/8-11 STI UNC - 3B

Thread Pitch Diameter: (H3) 0.6851 to 0.6856 inch

Thread Forming Method: Ground

Starting Chamfer Type: Plug

Flute Quantity: 4

Style Designator: Straight flute

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

5.4. 5140-00-935-0719 Qty: 1 UI: EA

TOOL BOX, PORTABLE

DESCRIPTION

Type VI: Thread Repair Kit module tool box

Size: 3

Overall length: 8.625 Inches

Overall Height: 7.375 Inches

Overall Width: 1.438 Inches

Handle Quantity: 1

Handle Location: Right End Surface

Closing Facility Type and Quantity: Friction Catch

Special Features: Tool Holding Clips

Material: Steel

Surface Treatment: Enamel, MIL-E-15090, Type 3, Class 2

See Technical Specifications paragraph(s): T1.3 and T2.1.

5.5. 5325-00-290-4494 Qty: 5 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard NASM122116 thru NASM122155-1998; Part Number MS122127; Thread size - 5/8(.625)-11UNC.

5.6. 5325-00-811-9469 Qty: 5 UI: EA

INSERT, SCREW THREAD

DESCRIPTION

In accordance with National Aerospace Standard, NASM21209 04/30/98. Part Number C1015:

Thread size: 5/8(.625)-11UNC.

End of 5180-00-054-7514 Components List

6. 5180-00-054-7519 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

This kit is used for the repair of 7/8-14UNF internal screw threads.

Additional Component

Screw thread insert

Insert Thread Size: 7/8-14 UNF

Insert Length: 1-3/8 inch

Number of Pieces: 6

Includes: 57/64 inch drill bit, installation inserter tool, and instructions

Case: compartmented protective case with latchable lid

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-054-7519:

6.1. 5120-00-251-1527 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator:: 7/16(.4375) inch to 1(1.000) inch (UNC or UNF)

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

6.2. 5136-00-370-4076 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type I: Tap, thread cutting

Class 1: Finishing, plug style

Style: Straight flute

Nominal Thread Size: 7/8-14 STI UNF - 3B

Thread Pitch Diameter: 0.9224 to 0.9229 inch (H3)

Thread Forming Method: Ground

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

End of 5180-00-054-7519 Components List

7. 5180-00-126-1765 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Tool Kit, Screw Thread Insert

Thread Series: 5/16 (.3125 inch)-24 UNF

Insert Screw Thread, Non-Locking, Quantity 20

Style: serrated

Length: 0.470 inch

Insert Size: 0.422-20 UNS

Thread Series: UNF

Thread Size: 5/16 inch

Thread Quantity Per Inch: 24

Thread Class: 2A

Special Features: dry film lubricant

Insert Screw Thread, Self-Locking, Quantity 20

Style: Serrated

Length: 0.470 inch

Insert Size: 0.422-20 UNS; 0.3863 inch, minimum; 0.3894 inch, maximum, pitch diameter

Feature: individually keyed

Thread Series: UNF

Thread Size: 5/16 inch

Thread Quantity Per Inch: 24

Thread Class: 2A

Special Features: dry film lubricant coating

Drill Twist: Quantity 1

Shank Diameter: 0.421 inch, minimum; 0.422 inch, maximum

Shank Style: straight round

Overall Length: 3.560 inch

Cutting End Style: step drill

Cutting Diameter: 0.3680 inch and 0.4220 inch

Cutting Rotation Direction: right-hand

Small Flute Section Length: 0.701 inch

Flute Quantity: 2

Point Type: conventional

Hardness Rating: 58.0 Rockwell C, minimum; 64.0 Rockwell, maximum

Point Angle: 118 degrees

Special Features: 90 degrees included angle countersink

Material: high speed steel

Tap, Thread Cutting; Quantity 1

Thread Pitch Diameters: 0.3904/0.3909 inch

Thread Direction: right-hand

Thread Length: 1.438 inch

Shank Diameter: 0.323 inch

Width Across Flats: 0.242 inch

Overall Length: 3.156 inch

Flute Quantity: 4

Thread Structure: regular

Thread: forming ground

Starting Chamfer Type: Plug

Square End Length: 0.406 inch

Material: high speed steel

Style: straight flute

Thread Size and Series/Type: 0.422-20 UNS

Wrench, Screw Thread Insert 4 Point; Quantity 1

Drive Size: 1/4 inch female square

Overall Length: 1.12 inch

Finish: black oxide

Wrench, Screw Thread Insert 6 Point; Quantity 1

Drive Size: 1/4 inch female square

Overall Length: 1.13 inch

Finish: black oxide

Swaging Tool, Screw Thread Insert; Quantity 1

Handle Diameter: 0.50 inch

Tip Length: 0.350 inch

Overall Length: 3 inch

Material: steel

Remover Tool Screw Thread, Slimsert Insert; Quantity 1

Pilot Length: 0.28 inch

Cutter Length: 1/2 inch

Material: high speed steel

The above components shall be furnished in a compartmented box.

See Technical Specifications paragraph(s): T0.1, T3.1, T4.1 and T6.1.

8. 5180-00-126-2797 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Thread Series: 10-32 UNF

Component Quantity: 87

Insert, Screw Thread, Non-Locking

Quantity: 40

Length: 0.290 inch

Insert Size: 0.281-32 UNS, 2A

Thread Class: 3B

Thread Quantity Per Inch: 32

Thread Series: UNF

Thread Size: 0.190 inch

Material: Steel

Features: Serrated Style

Insert, Screw Thread, Self-Locking

Quantity: 40

Length: 0.280 inch, minimum; 0.300 inch, maximum

Insert Size: 0.2812-28NS, 0.241 inch maximum, minor diameter

Thread Class: 3B

Thread Quantity Per Inch: 32

Thread Series: UNF

Thread Size: 0.190 inch nominal

Material: Steel

Features: Serrated Style; Individually Keyed

Drill, Twist

Quantity: 1

Shank Diameter: 0.280 inch minimum; 0.281 inch maximum

Shank Style: Straight Round

Overall Length: 2.750 inches

Cutting End Style: Step Drill

Cutting Diameter: 0.2417 inch and 0.2810 inch

Cutting Rotation Direction: Right-hand

Small Fluted Section Length: 0.488 inch

Flute Quantity: 2

Point Type: Conventional

Hardness Rating: 58.0 Rockwell C minimum; 64.0 Rockwell C maximum

Point Angle: 118.0 degrees

Material: High Speed Steel

Features: 90 degrees (included angle countersink)

Tap, Thread Cutting

Quantity: 1

Thread Pitch Diameters: 0.2590/0.2595 inch

Thread Direction: Right-hand

Thread Length: 1 inch

Shank Diameter: 0.255 inch

Width Across Flats: 0.191 inch

Overall Length: 2-1/2 inch

Flute Quantity: 4

Thread Structure: Regular

Thread Forming: Ground

Starting Chamfer Type: Plug

Square End Length: 0.214 inch

Material: High Speed Steel

Thread Size And Series/Type: 0.281-28 UNS

Features: Straight Flute

Wrench, Drive, 4-Point

Quantity: 1

Drive Size: 1/4 inch Female

Length: 0.94 inch

Material: Steel

Coating: Black Oxide

Wrench, Drive, 6-Point

Quantity: 1

Drive Size: 1/4 inch Female

Length: 0.96 inch

Material: Steel

Coating: Black Oxide

Swaging Tool, Screw Thread Insert

Quantity: 1

Length: 3 inches

Tip Length: 0.275 inch

Handle Diameter: 0.43 inch

Material: Steel

Remover, Screw Thread Insert

Quantity: 1

Diameter Pilot: 0.19 inch

Cutter Length: 1/2 inch

Material: High Speed Steel

Features: All Components furnished in a Compartmented Box

See Technical Specifications paragraph(s): T0.1, T3.1, T4.1 and T6.1.

9. 5180-00-177-8962 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Thread Series: 5/16-24 UNF

Component Quantity: 9 components including tool box; includes 20 each Insert, Screw Threads for a total of 47 pieces

Purpose: Components necessary for repairing damaged 5/16-24 UNF threads utilizing screw thread inserts in accordance with Military Specification Sheet MIL-I-45932/1b, part numbers M45932/1-17L and M45932/1-18

Insert, Screw Thread

Quantity: 20

In accordance with Military Specification Sheet MIL-I-45932/1B dated 2 MARCH 1989; Part Number M45932/1-18.

Insert, Screw Thread

Quantity: 20

In accordance with Military Specification Sheet MIL-I-45932/1B dated 2 March 1989; Part Number M45932/1-17L.

Drill, Twist (Step Drill)

Quantity: 1

Number of Flutes: 2

Smaller Cutting (Pilot) Diameter: 0.343 inch

Larger Cutting Diameter: 3/8 inch

Pilot Length: 0.700 inch (+/- 0.015 inch)

Overall Length: 3.120 inches

Cutting Direction: Right-Hand

Material: High Speed Steel

Purpose: Used to prepare the hole for the installation of screw thread inserts

Tap, Thread Cutting

Quantity: 1

Number of Flutes: 2

Thread Size, Series: 0.375-24 UNF

Thread Direction: Right-Hand

Purpose: Used to prepare the hole for the installation of M45932/1-17L and M45932/1-18 screw thread inserts

Inserter, Screw Thread Insert

Quantity: 1

Overall Length: 1.120 inches (+/- 0.015 inch)

Square Drive Size: 0.250 inch

Drive End Outside Diameter: 0.440 inch (+/- 0.015 inch)

Drive End Opening Depth: 0.280 inch (+/- 0.015 inch)

Material: Heat Treated Alloy Steel

Coating: Black Oxide per MIL-C-13924 and Oil per MIL-C-16173, Grade 3

Purpose: Designed to install M45932/1-18 screw thread inserts

Inserter, Screw Thread Insert

Quantity: 1

Overall Length: 1.130 inches(+/- 0.015 inch)

Square Drive Size: 1/4 inch

Drive End Outside Diameter: 0.440 inch (+/- 0.015 inch)

Drive End Opening Depth: 0.280 inch (+/- 0.015 inch)

Material: Heat Treated Alloy Steel

Coating: Black Oxide per MIL-C-13924 and Oil per MIL-C-16173, Grade 3

Purpose: Designed to install M45932/1-17L screw thread inserts

Swaging Tool, Insert

Quantity: 1

Overall Length: 4.270 (+/- 0.060 inch)

Working End Length: 0.423 inch (+/- 0.015 inch)

Outside Diameter of Working End: 0.345 inch minimum

Outside Diameter of Handle End: 0.560 inch (+/- 0.015 inch)

Material: Heat Treated Alloy Steel

Tip Material: M42 Steel or UNS-T11342 Steel

Coating: Black Oxide and Oil

Purpose: Designed to install size 5/16-24 UNF inserts to achieve a positive external lock

Extractor, Thread Insert

Quantity: 1

Overall Length: 3-1/2 inches

Outside Diameter: 0.269 inch

Cutting Surface: 1/2 inch (+/- 0.015 inch)

Pilot Diameter: 0.280 inch (+/- 0.015 inch)

Material: Heat Treated High Speed Steel

Coating: Wax Dipped

Purpose: Designed to remove M45932/1-17L and M45932/1-18 screw thread inserts

Tool Box, Portable

Quantity: 1

Tool Box Dimensions: 8-5/8 inches long, 3-5/8 inches wide and 15/16 inch deep

Box Body: Square Corners, box body corners to be lap joints and spot welded

Box Hinge: Continuous hinge attached to the lid and the box body on the other end

Lid: 90 degree, 3/8 inch flange, formed to fit over the box body

Lid Opening: 95 degree minimum opening

Handle Diameter: 1/8 inch

Handle Shape: Elongated Rectangular

Handle Dimensions: 7/8 inch by 3 inch

Handle Attached: To the short end of the body of the box formed so that it will not protrude over the box body and lid when folded flat against the box

Catch Type: Friction; may be an integral part of the box

Catch Location: At the handle end on the center of the box and lid

Material; Box Body and Lid: Not less than 24 Gage Sheet Steel

Features: When interior tool clips are riveted, the box shall contain 4 elongated projections installed lengthways in each corner in the bottom of the box. The box shall contain two pieces of foam material the length and width of the box. Tools shall be inserted between the two pieces of foam for protection.

See Technical Specifications paragraph(s): T0.1, T3.1, T4.1 and T6.1.

10. 5180-00-177-8968 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Thread Series: 10-32 UNF

Component Quantity: 9 components including tool box; includes 40 each Insert, Screw Threads for a total of 87 pieces

Purpose: Kit shall consist of the necessary tools and solid, one-piece inserts for repairing damaged 10-32UNF threads

Insert, Screw Thread, Non-Locking

Quantity: 40

Internal Thread: Class 3B modified minor diameter - 10-32 UNF

External Thread: modified minor diameter - 1/4-28 UNF

External Thread: minor diameter - 0.2170 inch, maximum

Insert Length: 0.29 inch (+/- 0.010 inch)

Counterbore Diameter: 0.192 inch (+0.008 inch, -0.002 inch)

Counterbore Depth: 0.085 inch (+0.010 inch, -0.000 inch)

Width Across Points: 0.18 inch

Features: 4-point wrenching recess

Insert, Screw Thread, Self-Locking

Quantity: 40

Internal Thread: Class 3B modified minor diameter - 10-32 UNF

External Thread: modified minor diameter - 1/4-28UNF

External Thread: minor diameter - 0.2170 inch, maximum

Insert Length: 0.29 inch (+/- 0.010 inch)

Counterbore Diameter: 0.192 inch (+0.008 inch, -0.002 inch)

Counterbore Depth: 0.085 inch (+0.010 inch, -0.000 inch)

Width Across Flats: 0.157 inch

Features: 6-point wrenching recess

Drill, Step

Quantity: 1

Overall Length: 2.62 inch (+.28 inch, -.13 inch)

Hardness: 58, minimum; 64 maximum, Rockwell C scale

Pilot End Diameter: 0.2192 inch minimum; 0.2199 inch maximum

Outside Diameter: 0.2493 inch minimum; 0.2500 inch maximum

Pilot Length: 0.488 inch (+/-.015 inch)

Made From: Standard Straight Shank Twist Drill (screw machine length, 2 flutes)

Material: High-Speed Steel

Coating: Strippable Plastic Coat to Protect Cutting Edge

Tap, Thread Cutting

Quantity: 1

Size: 1/4-28UNF, GH3

Type: Bottoming

Straight Flutes: 4

Material: High Speed Steel

Wrench, Drive, 4 point

Quantity: 1

Overall Length: 0.94 inch (+/-0.015 inch)

Drive Size: 1/4 inch

Drive End Depth: 0.28 inch (+/-0.015 inch)

Drive End Outside Diameter: 0.44 inch (+/-0.015 inch)

Material: Steel

Coating: Black Oxide plus Oil

Wrench, Drive, 6 point

Quantity: 1

Overall Length: 0.96 inch (+/-0.015 inch)

Drive Size: 1/4 inch

Drive End Outside Diameter: 0.44 inch (+/- 0.015 inch)

Drive End Depth: 0.28 inch (+/-0.015 inch)

Material: Steel

Coating: Black Oxide plus Oil

Swage Tool, Insert

Quantity: 1

Overall Length: 4.055 inch (+/-.060 inch)

Combined Length of Swage, Angle, and Tip: 0.273 inch (+/-.015 inch)

Swage Length: 0.077 (+0.000, -0.010 inch)

Swage Radius: 0.015 inch (+/- 0.005 inch)

Swage Diameter: 0.211 inch minimum

Handle Diameter: 0.43 inch (+/-0.015 inch)

Material, Handle: Alloy Steel

Material, Tip: Steel

Coating: Black Oxide plus Oil

Removal Tool, Slimsert Insert

Quantity: 1

Overall Length: 3.69 inch maximum

Blade Length: 1/2 inch (+/-.015 inch)

Pilot Length: 0.19 inch (+/-.015 inch)

Material: High Speed Steel

Coating: Wax Dipped

Tool Box

Quantity: 1

Tool Box Dimensions: 8-5/8 inches long, 3-5/8 inches wide and 15/16 inch deep

Box Body: Square corners, corners to be lap joints and spot welded

Box Hinge: Continuous hinge on the lid of the other side of the 3-5/8 inch end

Lid: 90 degrees, 3/8 inch flange, formed to fit over the box body

Lid Opening: 95 degree minimum opening

Handle Dimensions: 3 inch handle on one side (3-5/8 inch) of the body

Handle: Material, size and shape suitable for carrying the tool box when loaded

Material; Box Body and Lid: Not less than 24 gage sheet steel

Features: The box body shall have four elongated projections (legs) on the bottom; 2-5/8 inch long running parallel to the long side, and 1/32 inch high; extending 1/4 inch in from each side

See Technical Specifications paragraph(s): T0.1, T3.1, T4.1 and T6.1.

11. 5180-00-219-8407 UI: KT

TOOL KIT, FUEL PUMP

DESCRIPTION

Fuel pump tool kit used on Detroit Diesel Allison Gear/Gerotor engines, series 53, 71, 92, 110 and 8.2 liter. Components listed below shall be furnished in a high impact resistance plastic tool case with hinges and snap closure. The enclosure shall be of such a design to securely hold the components in place when the lid is closed.

1. Handle, oil seal installer; Quantity: 1 each

2. Adapter, oil seal installer; Quantity: 1 each

3. Remover, oil sea; Quantity: 1 each

4. Adapter; Quantity: 1 each

5. Holding, fuel fixture; Quantity: 1 each

Kent-Moore part number J1508-E, Evdon part number E-1508-0, Draf Industries part number 565 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T0.1, T3.1, T4.1 and T6.1.

12. 5180-00-234-1801 UI: KT

TOOL KIT, BLIND NUT

DESCRIPTION

Component Quantity: 13

Blind Nut Size Range: -440 to 1/2-13

Blind Bolt Size Range: -5 to -16

Purpose: Used to install Hi-Shear BN and BB series blind nuts and bolts manufactured by Hi-Shear Corporation

Kit Consists of:

1 Hand Pump and Case Assembly Hand including hand pump, hydraulic gun, hydraulic hose

Mandrels: 2 each M01-16 and M01-12

Chucks: 2 each C2-16 and C2-12

Anvils: 2 each A227-624 and A27-428

HS Tooling part number BH25BC or equal

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T0.1, T3.1, T4.1 and T6.1.

13. 5180-00-329-3318 UI: KT

TOOL KIT, WINDOW GLASS INSTALLATION, SELF-SEALING

DESCRIPTION

Purpose: to install CR Laurence AS1356 and AS1216 one-piece self-sealing weatherstrip to set glass in vehicular cabs, coaches and trailers.

Set shall consist of the following components provided in a plastic wrap or roll, with individual compartments: hollow inserter handle, channel spreader handle, 7/16 inch eye inserter, 7/16 inch collet, 3/8 inch eye inserter, 3/8 inch collet, 5/16 inch eye inserter, 5/16 inch collet, large channel spreader hook, small spreader hook, allen wrench.

Function: a - spreader eye inserters insert into the hollow inserter or channel spreader handles. Allen wrench is used to secure the inserter to the handle. Use the channel spreader to open the glass channel of the weatherstrip, allowing the glass to seat into position.

b - a collet is inserted into the aluminum front of the hollow insert handle and secured with set screw via allen wrench. Attach inserter eye, tighten set screw, feed the locking strip through the handle, the collet and the eye inserter.

C. R. Laurence Co. part number 201-1021 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

14. 5180-00-343-2016 UI: KT

TOOL KIT, AIR TUBING

DESCRIPTION

Contains necessary tools to install and make emergency repairs to thermo-pneumatic systems.

Consists of Toolbox:

One-(1) Bottle of Leak Detector Fluid

Two-(2) Open-end wrenches (4 inch Long with 1/4 x 3/8 inch openings), One-(1) half round file (8 inch long), Two-(2) flaring tools (5 x 1/4 inch), and

An instructional order sheet.

Contents must be contained within a toolbox

Figgie Fire Protection Systems part number 124-550 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T0.1, T3.1, T4.1 and T6.1.

15. 5180-00-698-7972 UI: KT

THREADING SET, SCREW

DESCRIPTION

Additional Components:

Thread Cutting Tap

B94.9

Type: Standard Straight Thread

Thread Size and Series: 3/4-16 UNF

Thread Pitch Diameter: See below

Thread Forming Method: Ground

Chamfer Type: Bottoming

Style: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

Exception to Technical Document: Pitch Diameter Limits shall be: (H4) 0.7109/ 0.7114 inch

Thread Cutting Tap

B94.9

Type: Standard Straight Thread

Thread Size-Series: 3/4-16 UNF

Pitch Diameter Limits: (H3) 0.7104/ 0.7109 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style: Straight flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

Tap, Thread Cutting

B94.9

Type: Standard Straight Thread

Thread Size and Series: 7/8-14 UNF

Thread Pitch Diameter: (H2) 0.8291/ 0.8296 inch

Chamfer Type: Plug

Thread Forming Method: Ground

Style: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

Case

Set shall be furnished in an impact resistant plastic, metal or wood case and shall be provided with cutouts, trays or inserts and so arranged that the components cannot come in contact with each other, thus preventing any damage to the cutting edges and allowing for easy selection. When case is either plastic or metal, lid shall be padded with a petroleum resistant padding, positioned inside of lid, in such a way as to keep taps and dies from moving during shipment and handling. Wooden case material shall be well seasoned hard wood (plywood is unacceptable). When wood cutouts are provided, finger notches/indentions are required allowing for easy removal of tools during use. Empty compartments in cutouts/inserts are unacceptable. Cases shall have a smooth finish with a moisture resistant coating of paint, clear lacquer or varnish. The case shall consist of a body, hinged lid, and a latch for securing the lid in a closed position. A listing of components with a transparent protective cover/coating to preserve the listing shall be furnished in the kit, secured to the inside of the case lid.

See Technical Specifications paragraph(s): T0.1, T1.4, T1.5, T3.1, T4.1 and T6.1.

List of Components of 5180-00-698-7972:

15.1. 5136-00-189-3220 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size and Series: 9/16-12 UNC.

Thread Pitch Diameters: 0.4990 to 0.5084 inches

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.2. 5136-00-189-3221 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size and Series: 5/8-11 UNC.

Thread Pitch Diameters: 0.5561" to 0.5660 inches

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.3. 5136-00-189-3222 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size and Series:3/4-10 UNC.

Thread Pitch Diameters: 0.6744 to 0.6850 inches

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand.

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.4. 5136-00-189-3223 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size and Series: 0.875 - 9 UNC.

Thread Pitch Diameters: 0.7914 in. to 0.8028 in.

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.5. 5136-00-189-3224 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size and Series: 1.00-8 UNC.

Thread Pitch Diameters: 0.9067 in. to 0.9188 in.

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.6. 5136-00-189-3199 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Pitch Diameters: 0.5182" to 0.5264".

Thread Size and Series: 9/16"-18 UNF.

Outside Diameter: 2-1/2 inches.

Thickness: 3/4 inch.

Thread Direction: Right-hand.

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.7. 5136-00-189-3200 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size And Series: 5/8"-18 UNF.

Thread Pitch Diameters: 0.5805/ 0.5889 inch

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: Carbon Tool Steel or High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.8. 5136-00-189-3201 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Pitch Diameters: 0.7004/ 0.7094 inch.

Thread Size and Series: 3/4-16 UNF.

Outside Diameter: 2-1/2 inches nom.

Thickness: 3/4 inch nom.

Thread Direction: Right-hand

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.9. 5136-00-189-3238 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style: Round Split With Internal Adjustable Screw

Thread Size and Series: 7/8-14 UNF

Thread Pitch Diameter: 0.8189 inch to 0.8286 inch

Thread Direction: Right-hand

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Material: Carbon Tool Steel or High Speed Steel

See Technical Specifications paragraph(s): T1.2.

15.10. 5136-00-820-8090 UI: EA

DIE, THREAD CUTTING

DESCRIPTION

Style Designator: Round split with internal adjusting screw.

Thread Size, Series/Type Designator: 1.000-12 UNF

Thread pitch: 0.9353" to .9459 inches

Outside Diameter: 2-1/2 inches

Thickness: 3/4 inch

Thread Direction: Right-hand

Material: Steel, High Speed

See Technical Specifications paragraph(s): T1.2.

15.11. 5136-00-729-5718 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series/Type Designator: 9/16-12 UNC

Thread Pitch Diameter: 0.5094/ 0.5099 inch

Chamfer Type: Bottoming

Thread Form: Ground

Thread Structure: Regular

Thread Direction: Right-Hand

Flute Quantity: 4

Style: Straight Flute

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.12. 5136-00-729-5717 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series/Type Designator: 5/8-11 UNC

Thread Pitch Diameter: (H3), 0.5670/ 0.5675 inch

Chamfer Type: Bottoming

Thread Form: Ground

Thread Structure: Regular

Thread Direction: Right-Hand

Flute Quantity: 4

Style: Straight Flute

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.13. 5136-00-729-5716 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series/Type Designator: 3/4-10 UNC

Thread Pitch Diameter: (H3), 0.6860/+0.6865 inch

Chamfer Type: Bottoming

Thread Form: Ground

Thread Structure: Regular

Thread Direction: Right-Hand

Flute Quantity: 4

Style: Straight Flute

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.14. 5136-00-228-1054 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 7/8-9 UNC

Thread Pitch Diameter: (H4) 0.8043/ 0.8048 inch

Chamfer Type: Bottoming

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.15. 5136-00-729-5715 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread.

Thread Size-Series: 1.00-8 UNC

Thread Pitch Diameter: (H4) 0.9203/ 0.9208 inches

Chamfer Type: Bottoming

Thread Form: Ground.

Style Designator: Straight flute

Thread Direction: Right-Hand.

Flute Quantity: 4.

Material: High Speed Steel.

See Technical Specifications paragraph(s): T1.4.

15.16. 5136-00-580-7158 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 9/16-18 UNF

Pitch Diameter: (H3) 0.5274/+0.5279 inch

Chamfer Type: Bottoming

Thread Form: Ground

Style: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.17. 5136-00-262-2195 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 5/8-18 UNF

Thread Pitch Diameter: (H2) 0.5899/ 0.5904 inch

Thread Forming Method: Ground

Chamfer Type: Bottoming

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.18. 5136-00-580-7163 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread.

Thread Size-Series: 7/8-14 UNF

Thread Pitch Diameter: (H4) 0.8301/ 0.8306 inches

Chamfer Type: Bottoming

Thread Form: Ground.

Style Designator: Straight flute

Thread Direction: Right-Hand.

Flute Quantity: 4

Material: High Speed Steel.

See Technical Specifications paragraph(s): T1.4.

15.19. 5136-00-580-7166 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 1.000-12 UNF

Thread Pitch Diameter: (H4) 0.9474/ 0.9479 inch

Thread Forming Method: Ground

Chamfer Type: Bottoming

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.20. 5136-00-580-7169 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 9/16-12 UNC

Thread Pitch Diameter: (H3) 0.5094/ 0.5099 inch

Chamfer Type: Taper

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.21. 5136-00-729-5683 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 5/8-11 UNC

Pitch Diameter: (H3) 0.5670/ 0.5675 inch

Chamfer Type: Taper

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.22. 5136-00-729-5682 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 3/4-10 UNC

Pitch Diameter: (H3) 0.6860/ 0.6865 inch

Chamfer Type: Taper

Thread Form: Ground

Style: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.23. 5136-00-239-2174 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Nominal Thread Size: 7/8-9 UNC

Thread Pitch Diameter: (H4) 0.8043/ 0.8048 inch

Chamfer Type: Taper

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.24. 5136-00-228-1031 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Nominal Thread Size: 1.00-8 UNC

Thread Pitch Diameter: (H4) 0.9203 to 0.9208 inch

Chamfer Type: Taper

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.25. 5136-00-580-7170 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 9/16-18 UNF

Thread Pitch Diameter: (H3) 0.5274/ 0.5279 inch

Chamfer Type: Taper

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.26. 5136-00-228-0998 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 5/8-18 UNF

Thread Pitch Diameter: (H3) 0.5899/ 0.5904 inch

Chamfer Type: Taper

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.27. 5136-00-228-0999 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 3/4-16 UNF

Pitch Diameter: (H3) 0.7104/0.7109 inch

Chamfer Type: Taper

Thread Form: Ground

Thread Structure: Regular

Thread Direction: Right-hand

Flute Quantity: 4

Style: Straight flute

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.28. 5136-00-580-7175 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 7/8-14 UNF

Pitch Diameter Limits: (H4) 0.8301/ 0.8306 inches

Chamfer Type: Taper

Thread Form Method: Ground

Style Designator: Straight flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.29. 5136-00-580-7177 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 1.000-12 UNF

Thread Pitch Diameter: (H4) 0.9474/ 0.9479 inch

Thread Forming Method: Ground

Chamfer Type: Taper

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.30. 5136-00-729-5690 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 9/16-12 UNC

Thread Pitch Diameter: (H3) 0.5094/ 0.5099 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.31. 5136-00-223-6228 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 5/8-11 UNC

Thread Pitch Diameter: (H3) 0.5670/ 0.5675 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.32. 5136-00-729-5702 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 3/4-10 UNC

Thread Pitch Diameter: (H3) 0.6860/ 0.6865 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.33. 5136-00-729-5701 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 7/8-9 UNC

Thread Pitch Diameter: (H4) 0.8043/ 0.8048 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.34. 5136-00-227-7260 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 1.00-8 UNC

Thread Pitch Diameter: (H4) 0.9203/ 0.9208 inch

Chamfer Type: Plug

Thread Forming Method: Ground

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.35. 5136-00-580-7186 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series/Type Designator: 0.562-18 UNF

Thread Pitch Diameter: 0.5274/ 0.5279 inches

Chamfer Type: Plug

Thread Form: Ground

Thread Direction: Right-Hand

Flute Quantity: 4

Style: Straight Flute

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.36. 5136-00-254-4518 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size-Series: 5/8-18 UNF

Pitch Diameter Limits: (H3) 0.5899/ 0.5904 inch

Chamfer Type: Plug

Thread Form Method: Ground

Style Designator: Straight Flute

Thread Direction: Right-Hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.37. 5136-00-841-2837 Qty: 1 UI: EA

TAP, THREAD CUTTING

DESCRIPTION

Type: Standard Straight Thread

Thread Size and Series: 1-12 UNF

Thread Pitch Diameter: (H4) 0.9474/ 0.9479 inch

Thread Forming Method: Ground

Chamfer Type: Plug

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.4.

15.38. 5136-00-224-7114 UI: EA

DIESTOCK

DESCRIPTION

Die diameter size accommodated: 2-1/2 inch

Die thickness accommodated: 3/4 inch

Overall length: 22 inches minimum, 32 inches maximum.

Die shape for which designed: Round

Guide Adjustability: Adjustable

Handle Quantity: 2

Special features: Handles 180 degrees apart.

See Technical Specifications paragraph(s): T1.5.

15.39. 5120-00-449-8245 UI: EA

WRENCH, TAP AND REAMER

DESCRIPTION

Tap capacity range: 1/2 to 1-1/4 inches

Tap Size range: 0.500 to 1.250 inches

Overall Length: 25.00 to 31.00 inches

Material: Steel

See Technical Specifications paragraph(s): T1.1.

End of 5180-00-698-7972 Components List

16. 5180-00-752-9793 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

This kit consists of the following eighteen (18) screw thread repair kits furnished in a box with listed dividers

Fine Thread: 4-40, 6-32, 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 3/4-10

Coarse Thread: 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 5/8-18, 3/4-16

Thread Inserts: 6 each size

Case: protective, compartmented with latching lid containing all kit sizes and accessory tools - taps, drill bits, removal and installation tools, and instructions

See Technical Specifications paragraph(s): T1.3, T2.1, T3.1, T4.1 and T6.1.

17. 5180-00-778-3789 UI: KT

TOOL KIT, STUD INSTALLATION-REMOVAL

DESCRIPTION

Component Quantity: 18

Features: Furnished in a suitable compartmented container with instruction sheet and parts list

Kit Consists of:

6 Hollow Mills: 1 each of SM91-16, SM101-18, SM111-20, SM121-22, SM131-24 and SM141-26

6 Installation Wrenches: 1 each of R1104W, R1105W, R1106W, R1107XW, R1108W ad R1110W

6 Lockring Drives: 1 each of S91D10, S101D12, S111D12, S121D12, S131D14 and S141D14

Alcoa Global Fasteners, Rosan Products part number RZA11197 or equal

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

18. 5180-00-832-4911 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

For repair of 10-32 UNF threads damaged beyond the correction range of standard and oversize inserts.

The kit shall consist of the following components in the quantities indicated.

Component Item Heli-Coil

Name Part Number Quantity

Inserting Tool 2705-3 1

Tang Break-Off 4032-3 1

Tap 3893-3 2

Insert Outer Std. 2391-3CN285 25

Insert Inner Std. 4491-3CN254 25

Insert Inner S/L 4691-3CN254 25

Instruction Sheet 1

Storage Box 1

Emhart Industries, Heli-Coil Products part number 4147-3-1 or equal.

Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

See Technical Specifications paragraph(s): TB.1, T3.1, T4.1 and T6.1.

19. 5180-00-935-0731 UI: KT

TOOL KIT, SCREW THREAD INSERT

DESCRIPTION

Tools for Inserting and Extracting Helical Coil Wire Screw Thread Inserts

Table XIX Kit compositions; Thread size 10(.190)-24 UNC.

Consisting of the following components:

Inserter, Screw Thread

Type: III (Inserting tool, screw thread inserts).

Class: 1 (Prewinder tools).

Style: A (1/2" and smaller unified coarse and fine threads and metric spark plug threads).

Thread Size/Series: 10-24 UNC.

Tool for inserting and extracting helical coil wire screw thread inserts

See Technical Specifications paragraph(s): T0.1, T1.3, T2.1, T3.1, T4.1 and T6.1.

List of Components of 5180-00-935-0731:

19.1. 5120-00-816-5706 Qty: 1 UI: EA

INSERTER, SCREW THREAD INSERT

DESCRIPTION

Type: III (Inserter, Screw Thread Insert)

Class: 1 (Prewinder)

Style A: Threaded mandrel prewinder inserting tools for 1/2 (.500) inch and smaller unified coarse and fine screw thread inserts.

Thread Size And Series: 10-24 UNC.

See Technical Specifications paragraph(s): T1.3 and T2.1.

19.2. 5120-00-937-9730 Qty: 1 UI: EA

TANG BREAK-OFF TOOL, SCREW THREAD INSERT

DESCRIPTION

Type IV: Tang break-off tools

Class 2: 1/2 (0.500) inch and smaller unified coarse and fine threads, plain punch

Thread Size: 10(.190).

See Technical Specifications paragraph(s): T1.3 and T2.1.

19.3. 5120-00-723-6833 Qty: 1 UI: EA

EXTRACTOR, SCREW THREAD INSERT:

DESCRIPTION

Extracting tool for unified coarse and fine and spark plug thread series.

Type: V (Extracting tools).

Thread Size and Series/Type Designator: 10 (.190) thru 3/8(.375) inch UNC or UNF

See Technical Specifications paragraph(s): TE.6, T1.3 and T2.1.

19.4. 5136-00-825-7132 Qty: 2 UI: EA

TAP, THREAD CUTTING:

DESCRIPTION

Type I: Tap, thread cutting

Class 1: Finishing, plug style

Thread Size and Series: 10-24 STI UNC - 3B

Thread Pitch Diameter: (H2) 0.2175/ 0.2180 inch

Thread Forming Method: Ground

Chamfer Type: Plug

Style Designator: Straight flute

Thread Direction: Right-hand

Flute Quantity: 4

Material: High Speed Steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

19.5. 5140-00-935-0720 Qty: 1 UI: EA

TOOL BOX, PORTABLE:

DESCRIPTION

The tool box shall consist of a body, lid handle and friction catch

Type VI: Thread Repair Kit module tool box

Size: 4.

Overall Length: 8-5/8 inch

Overall Height: 15/16 inch

Overall Width: 3-5/8 inch

Material: steel

See Technical Specifications paragraph(s): T1.3 and T2.1.

19.6. 5325-00-680-3762 Qty: 10 UI: EA

INSERT, SCREW THREAD:

DESCRIPTION

In accordance with National Aerospace Standard NASM21209, adopted April 30, 1998; Dash No.