PWS-Compressors 20 July 2020.pdf

Statement of Work Air Compressor Servicing for 19 MXS

20 July 2020

1.0. PROJECT SCOPE. The Contractor shall provide all parts, labor, materials, tools, equipment and supervision to service air compressors, air dryers and all associated in-line filters in buildings 233, 242, 228, 282, 246, 250, 255, 256, 268, 280, 466, and 232. Contractor shall verify all existing site conditions and measurements prior to beginning any work. Contractor shall protect all Government property against damage, to include but not limited to impact, scratching, water, power failure, power surges, and weather.

All damages caused by the Contractor, whether to equipment, furniture, roads, landscaping, building components or any other type of Government property encountered at or near the project site shall be repaired or replaced to match existing and to the satisfaction of the Contracting Officer at no cost to the Government. Servicing of compressor model numbers (GA33FF, GA22, QVT54, GA30FF, GA37FF, GA7VSD, GA22VSD, LS100, ES8, MB8, KT5PV, HRA25-12, GA37VSD, 2545, ZT37 AND GA55).

This equipment will have two services, a semi-annual and an annual service for each of the listed compressors. The contractor will provide servicing per manufacturer’s instructions. Shipping and handling to site must include off-load and disposal of all packaging. Contractor is required to complete cleanup including but not limited to: removal of any dust, dirt, debris, fluids, trash, or replaced parts created by the contractor.

1.1. SCHEDULE. Contractor is required to complete tasks no more than 5 working days from the start of the project.

2.0. STANDARDS AND CODES. Work and equipment shall comply with the applicable OSHA, EPA and building standards and codes in place at the time of the maintenance service.

3.0. GOVERNMENT FURNISHED FACILITIES. No facilities will be furnished.

4.0. GENERAL PROVISIONS.

4.1. SCHEDULE AND STANDARD WORKDAY/WEEK. Work shall be accomplished during a standard, 5-day week, Monday through Friday, between the hours of 0730 to 1630, excluding Federal Legal holidays. When the Contractor desires to work at other than the aforementioned times, the Contractor shall submit a written request to the Contracting Officer for approval. The request shall be submitted at least five (5) work days prior to the proposed performance of work, and shall indicate the day/days, time/amount of work, and reason why permission should be granted to perform work during nonstandard hours. Approval for work to be performed during nonstandard time will be given only in cases of extreme necessity.

4.2. NOTIFICATION. The Contractor shall coordinate all work with 19 MXS POC SSgt Terrell Chester. Email: Terrell.Chester@us.af.mil Phone: 501-987-6295

4.3. PARTS. During the semi-annual and annual maintenance service, the contractor is responsible to furnish all parts required to bring up to or maintain the equipment at acceptable performance levels.

MXS AIR COMPRESSOR LISTING

Bldg Shop Manufacturer Product # Model Number Serial# SQ comments 232 N&S Fuel Shop

Air Dryer Air Dryer

Atlas CO

SPX Flow Atlas CO

GA55

GA55

ZT37

ZT37

305 DM

FD 410

API620011

API620030

API790625

API790624

1000002942035

MXS

228 Wash rack Atlas CO GA30FF API326400 MXS 233 Wash rack Atlas CO 8972 439122 GA22FF HOP900160 MXS 233 Wash rack Atlas CO 8972 439122 GA22FF HOP900166 MXS 246 Metals tech EMAX APP4V1043T 87109 MXS 250 ISO Atlas CO GA22VSD API425103 MXS

250 ISO

Air Dryer Sullair Gardner Den

LS100-40H/A/SUL

RNC200A4C2

030906343

GD200A4600403036

MXS

255 Sheet Metal SULLAIR ES8-15XH 003-120410 MXS

256 AGE INGERSOLL

-RAND

MB8-H71T2 30T00606G MXS

268 AGE Atlas CO KT5PV8034 HOP256244 MXS 280 Old Fuels Champion HRA25-12 D087921 MXS 282 Corrosion ATLAS CO GA37FF API540931 MXS 282 Corrosion ATLAS CO GA37VSD API577155 MXS 466 Props Garden Den DGH40 1214083-1 MXS 466 Props INGERSOLL

-RAND

2545 0609130129 MXS

242 E&E/Hydro Quincy 2V41C60VC QTV-54 QU1303120054 MXS