PWS - Attachment 1.pdf
PDF 51 KB Posted
- Attached to
- DDSP Open Top Container (30 YD) and Compactor Receiver (40 YD) Federal contract opportunity
- Solicitation number
- SP3300-25-Q-0051
- Issued by
- Defense Logistics Agency Distribution
About this file
This Performance Work Statement (PWS) attachment specifies requirements for two types of containers to be delivered to Defense Distribution Center, Susquehanna.
CLIN 0001 covers Open Top Containers with minimum 30yd capacity and maximum 22 feet length, compatible with SWAPLOADER SL-520X HOIST ASSEMBLY. Key specifications include 3/16" steel plate floor construction with structural steel tubing, 45-degree bull nose design, reinforced floor with steel channels, continuous weldments, steel rollers with grease fittings, and heavy-duty door hinges. CLIN 0002 details Roll-Off Compactor Receivers of at least 40yd capacity, maximum 22 feet length, with similar SWAPLOADER compatibility. Both items require 1.5 mil primer and paint coating in red color, with specific construction requirements for durability including steel plate bodies, reinforced structures, and safety features like driver-side door latches and ratchet locking systems.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CSS SP3300-25-Q-0051.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PWS- Attachment 1
CLIN 0001
Open Top Containers are to conform to the following:
-Minimum of 30yd and Max of 22 feet long.
- Set up for use with a SWAPLOADER SL-520X HOIST ASSEMBLY.
-Floor is 3/16" steel plate with 6"x 2"x 1/4" structural steel tubing.
-Solid bull nose with 45 degree angle for ease of sliding on rails.
-Floor reinforced with 3" structural steel channel on 16" centers with 1/4" gussets floor is extended 3" to support bottom of door.
-Side support channels are 10-gauge steel plate on 24" centers.
-Top rails are 5"x 3"x 3/16" structural steel tubing.
-All exterior and interior wall to floor joints are continuous weldments
-All side and top support channels have drain holes to help against rusting, all fronts are full taper
-Two steel rear rollers with two steel front rollers with grease fittings
-Body construction is 3/16” steel
-Door construction is 3/16” steel plate and reinforced with 2"x 3"x 3/16"structural steel tubing and cross beams
-Door latch located on drivers side of container and an adjustable positive cam lock system to prevent door bounce
-Door hinges are heavy duty with grease fittings
-Cleaned and primed to 1.5 mil and painted to 1.5 mil on all interior and exterior surfaces
Color is Red
CLIN 0002
Roll-Off Compactor Receivers are to conform to the following:
-At least 40 yd container Max 22 feet long
-Set up for use with a SWAPLOADER SL-520X HOIST ASSEMBLY
-Floor is 3/16” steel plate with 6” x 2” x 1/4” structural steel tubing with 1/2” x 2” steel bottom wear bars.
-Solid bull nose with angle for ease of sliding on rails.
-Floor reinforced with 3” structural steel channel on 16” centers with 1/4" gussets floor is extended 3” to support bottom of door.
-Body construction is 3/16” steel plate.
-Lower body construction is 3/16” steel plate.
-All exterior and interior wall to floor joints are continuous weldments.
-Tapered front and side walls on body interior.
-Four 10” wide x 8” steel rear rollers with 2” axles and two 4” x 4” solid steel front rollers with 1 ½” axles all with grease fittings.
- Door latch located on drivers’ side of container for maximum safety and is a ratchet locking system.
-Door hinges are heavy duty with grease fittings.
-Cleaned and primed to a minimum 1.5 mil and painted to 1.5 mil on all interior and exterior surfaces. Color RED
Contractor is to deliver containers and receivers to Defense Distribution Center, Susquehanna.
File details come from the government source that posted it. Updated .