Purchase Description Draft.pdf

1 | 4

PURCHASE DESCRIPTION

NAS Lemoore Hoist Platform

1. INTRODUCTION

NSWC Corona is seeking to procure Fiberglass Reinforced Polymer prepared material in order to assemble a replacement HOIST training platform at NAS Lemoore.

2. BACKGROUND

Naval Surface Warfare Center Corona (NSWC Corona) has been tasked by the Naval Aviation Training Systems to demolish and re-install a retrofitted Helicopter Hoist Trainer (Device 9H1) located within Naval Air Station (NAS), Lemoore. This trainer provides hands on training in helicopter rescue hook, rescue basket, and rescue strop procedures. The efforts involve removing the existing metal HOIST platform and concrete footings, and replacing them with new platform made of Fiberglass Reinforced Polymer (FRP) and concrete footings. Redesign of the platform and all requisite parts has been completed and require fabrication out of FRP.

3. REQUIREMENTS

The contractor is required to adhere to all applicable standards and guidelines when applicable.

In the absence of named standards, Department of the Navy (DON) standards, applicable Federal Information Processing Standards (FIPS), and broadly accepted professional standards shall prevail as related to the associated industries within the task identified below.

Document Type No./Version Title Date

DOD

Documentation

1.1 Lemoore Hoist Structural Plan Set

– FINAL(v1.0 20220603 1430

PDT) (S&S)

June 2022

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

RDD Prior to 14 October 2022

B. PLACE OF PERFORMANCE

N/A

2 | 4

C. SHIPPING ADDRESS

DODAAC: N64267

NSWC Corona Division 1999 4th Street Norco, CA 92860

D. INSPECTION AND ACCEPTANCE

Inspection and acceptance will be conducted by RS30 personnel at NSWC Corona

E. TECHNICAL POINT OF CONTACT

TBD

3 | 4