Product Description - Dispatch Station.pdf

Product Description

TEXAS AIR NATIONAL GUARD (TXANG) 149th Fighter Wing

DATE: 1 July 2021

TITLE: Command and Control Dispatch Station

1. PURPOSE. The command and control dispatch station is required for the installation of the Unify command and control communications console and for command post controller duties.

2. SCOPE OF WORK. The contractor shall provide all materials, delivery, and support necessary to meet the required specifications and installation for the command and control dispatch station.

3. DELIVERY LOCATION AND DELIVERY DATE. This equipment shall be delivered to the 149th Fighter Wing, Building 935, located at 108 Hensley Street, JBSA-Lackland, TX 78236.

4. QUANTITY REQUIRED: 1 each.

5. SPECIFICATIONS REQUIRED.

5.1 Site survey and measuring the work area for the dispatch station. Dispatch station may not exceed 13’5 ¼” length in order to fit into the required space. Must allow at least 3 feet egress between station and exit doors and walkways.

5.2 Dispatch station must accommodate 2 workstations and a shared peninsula or island with shelving for quick reaction and controller collaboration.

5.3 Dispatch station must accommodate three 24” free standing monitors

5.4. Must accommodate UHF/VHF and Land Mobile Radio usage.

5.5. Ergonomical to facilitate 12 hour controller shifts with ability to raise and lower workstations.

5.6. Must have writing surface and accommodate telephone usage on both sides.