SOW.doc

Department of Homeland Security

Customs and Border Protection

Statement of Work

For

Guardian 200 Livescan Fingerprint Scanner

1.0 BACKGROUND

Customs and Border Protection (CBP) is seeking quotations in an effort to purchase 100 Guardian 200 Livescan fingerprint scanners with 10-Print Rolled Software Development Kit (SDK) using a Firm, Fixed Price Type Contract for the Office of Border Patrol (OBP). This procurement is intended to enhance current processing capabilities/initiatives and to replace current stock that is nearing the end of lifecycle. Detailed specifications for the fingerprint scanners are provided in section 3.

Potential vendors shall provide quotations for the devices.

The standard for all proposals shall be those outlined with the CLIN below of name brand or equal to.

2.0 SCOPE OF WORK

2.1 Contract Type

Firm Fixed Price (FFP)

3.0 DESCRIPTION OF TASKS AND DELIVERABLES

3.1 Specific Requirements:

CBP shall order approximately

(100) Guardian 200 Livescan Fingerprint Scanners with 10-print rolled SDK

Upon award and e-mail notification, the vendor shall furnish the biometric devices in strict accordance with the minimum Specifications in paragraph 3.3 below.

3.2 Deliverables

Specifications for Contract Line Item Numbers (CLINs)

3.3 CLIN XXXX- Livescan Fingerprint Scanner

Livescan Fingerprint Scanner (Guardian).

Each Livescan Fingerprint Scanner shall have the ability to capture:

· Single Finger Rolls

· Single Thumb Slaps

· Single Finger Slaps

· Four Finger Slaps

· Simultaneous Thumb Slaps Each Livescan Fingerprint Scanner shall include, built in:

· FAP 60, Appendix F certified fingerprint scanner

· 10-print rolled Software Development Kit (SDK)

· FBI certified for both civil ID flats and full criminal ten-print rolls/flats

· Capable of auto capture for flat and rolled fingerprints without user intervention

· 3.2” X 3.0” or larger optical capture platen

· Feature (silicone pad on platen) to aid in capturing dry/worn finger prints

· Silicone pad kit

· 500 pixels per inch resolution or greater

· Auto filtering and rejecting of residual ghost images

· Deck Dimensions not greater than 6” X 4.5”X 10 (open) 6”X 4.5” X 5.7 (closed)

· Total weight no greater than 3.5 lbs.

· Feature (silicone pad on platen) to aid in capturing dry or worn finger prints

· Factory calibrated and sealed, with automatic self-test and diagnostic

· Minimum of Two (2) External USB 2.0 interface ports

· USB powered, external power supply

· Must be approved for use on CBP Network

· Edge Detection (Arrows for applicant guidance)

· Spoof Detection (To distinguish between real and fake prints)

· Moisture discrimination-superior wet/dry print capture without recalibration

· Intuitive instructions via illuminated pictograms

· Auto capture-rapid high quality images

· USB powered device

System Specifications- Handheld Mobile Biometric Capture Device

· Operating System: Windows 7/8/10

· Firmware capable of update through on-board USB 2.0 port

· IP 54 certified for water and dust protection

· Capable of operating at temperatures between 32° and 122° F

· Capable of operating at humidity ranges between 10%-90%

· Non-condensing/splash resistant

3.4 Key Personnel

POCs:

Jason R. Thompson or Designee:

Phone: 202-597-0503 Email: jason.r.thompson@cbp.dhs.gov

3.5 Applicable Documents

All bidders must submit required documents in accordance with the instructions in the FedBid.com solicitation posting

3.6 Proposal Submission

Proposals shall be submitted as specified in the FedBid.com solicitation

3.7 Delivery Instructions

Delivery instructions shall be to the designated 10720 Richmond Highway, Lorton, VA 22079. Delivery is expected within 15 days of the award date.

3.8 Inspection and Acceptance

All Inspection and Acceptance activities for this order shall be performed at the delivery address (DESTINATION).

4.0 GENERAL INFORMATION

4.1 Disclosure of Information

4.1.1 Any information made available to the contractor by the government or its customers shall be used only for the purpose of carrying out the provisions of this contract. This information shall not be divulged or made known in any manner to any persons except as may be necessary in the performance of the contract.

4.1.2 In the performance of this contract, the contractor assumes responsibility for the protection of the confidentiality of government records.

4.1.3 The contractor will adhere to the requirements found in Part 24 of the Federal Acquisition Regulation, Protection of Privacy and Freedom of Information.

4.2 Technical Contact

4.2.1 The Customs and Border Protection technical contact person or Contracting Officer’s Technical Representative (COTR) will be Julianne R. Chavis. The COTR may be contacted at Julianne.R.Chavis@cbp.dhs.gov

4.2.2 All Contract administration matters will be handled by the Contracting Officer

4.3 Government Furnished Property

Not applicable for this order.

4.4 Contractor Furnished Items

4.4.1 The contractor shall furnish all labor, materials, and facilities necessary to produce and distribute the products, including permits, licenses, and bonding.