Portable Laser Marker Item Description.pdf
PDF 293 KB Posted
- Attached to
- Portable Laser Marker Federal contract opportunity
- Solicitation number
- FA8125-23-Q-0091
About this file
This memorandum provides an item description for a portable laser marker being procured by the 76th Aircraft Maintenance Group of Tinker Air Force Base through solicitation FA8125-23-Q-0091 issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. The item description specifies that the portable laser marker must comply with SAE specifications AS5942 or AS5649 and BAC 5152, have the capability to process, handle, and mark wire from 26 to 6 AWG, measure and cut wire, mark wires at a minimum speed of 25 meters per minute with upper- and lower-case text, include a powered coiling pan, knot and splice detection, and have user controls via a touchscreen interface. The laser marker must also be electrically powered at 120VAC 20A and fit within a 65" x 30" x 40" space without requiring compressed air. Installation, training, and maintenance kit/instructions are also required.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment FA812523Q00910001 SF 30.pdf | ||
| Solicitation - FA812523Q0091.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (AFMC)
TINKER AIR FORCE BASE, OKLAHOMA
7 April 2023
MEMORANDUM FOR RECORD
FROM: Mark Todd
OCALC/OBCA
3001 Staff Drive T67 Tinker Air Force Base, OK 73145
SUBJECT: Item Description, A23-062 Portable Laser Marker
References: (a) AIF, SAE AS5942, SAE AS5649 and BAC 5152
1. The 76th AMXG/564 is requesting utilization of funds for the purchase of one (1) Portable Laser
Maker.
2. The requested equipment item description / Specifications are outlined below.
a. Quantity of One (1) Portable Laser Maker.
b. Startup:
(1) Five (5) days of Installation and Training at Tinker Air Force Base, OK.
(2) Maintenance kit and instructions shall have a minimum of ten (10) replacement consumables such as belts and filters.
c. Standards:
(1) Shall comply with direct marking SAE specifications AS5942 or AS5649
(2) Shall comply with BAC 5152
ci. Wire Processing / Handling / Printer
(1) Powered coiling pan.
(2) Knot and splice detection.
(3) Wire size and cut capability – 26 AWG to 6 AWG
(4) Measure and cut capability.
(5) Shall have a minimum speed of 25 meters per minute.
(6) Shall have upper- and lower-case text marking capability on wires.
(7) Table-top unpowered de-reeler.
(8) Wire tension monitoring to ensure wires are not over tensioned when being marked.
Appendix A: Portable Laser Maker
e. Power Requirements
(1) Electrically powered by standard 120VAC 20A.
(2) Device shall not require compressed air to operate.
f. Site Constraints:
(1) Plug Configuration shall be NEMA 5-15P.
(2) Dimensions: De-reeler and wire marker shall fit within a 65”(L) x 30” (W) x 40” (H)
Space.
g. Control:
(1) User control screen built into device.
(2) User control interface must be touchscreen.
File details come from the government source that posted it. Updated .