PD_N6426720Q0221_Redacted.pdf

PURCHASE DESCRIPTION

Marine Corp Air Station (MCAS) Yuma Microwave Backbone Upgrade (FY17P36)

1 INTRODUCTION

The Naval Surface Warfare Center Corona Division (NSWC CORDIV), Range Systems Department RS14, requires microwave radio communications hardware and associated equipment in support of the Systems Replacement and Modernization (SRAM) Program. The material sought in this procurement is required at MCAS Yuma and is part of the South West Tactical Training Range (SWTTR) microwave backbone equipment upgrade.

2 BACKGROUND

The SWTTR microwave backbone is utilized to transmit data between various locations within that region of operation. The microwave units and other components have exceeded their functional lifecycle due to age and, as a result, reliability of data transmissions has degraded over time.

Additionally, other portions of the microwave backbone network have been upgraded to newer equipment. This particular effort is required in order to modernize older portions of the microwave backbone network.

In order to accomplish this task SWTTR personnel have initiated a plan to transition their existing Aviat outdoor unit solution with new indoor equipment and has changed their operating frequencies to comply with Spectrum Management planning and NTIA. As other portions of the network have previously been upgraded to Aviat hardware for the reasons listed, this will not only accomplish the goal of replacing aging equipment with new elements, but also allows for equipment consistency and commonality in network management techniques at all points within the system.

This particular effort is for the purchase of microwave link equipment for NAF El Centro Building 5000 to Building 524 and Telegraph Pass to MCAS Yuma Building 405; for the latter, installation is also required.

3 REQUIREMENTS

Brand Name Items are requested as the microwave radio network components and associated items within this procurement shall be utilized in the upgrade and expansion of an existing system that has been deployed. No alternatives shall be considered for award.

NOTE: Microwave radio operating frequencies shall be provided at time of award.

3.1 The Contractor shall provide pricing for the listed equipment identified.

3.2 Exact microwave frequencies will be provided to the Contractor upon award. The frequency request is currently under approval by NTIA.

The Aviat microwave radio network components and associated items listed shall:

3.3 Be equipped with throughput capacity up to 462 Mbit/s Ethernet/IP, up to 16xDS1 native

TDM

3.4 Be configured with high port density with 6 Gigabit Ethernet (GigE) and 16x DS1 ports

3.5 Be configured with nodal capability of up to six independent radio paths from a single indoor unit

3.6 Provide fault and configuration management to include secure management, payload encryption

3.7 Be configured with channel bandwidth support of up to 80MHz

3.8 Provide capacity support up to 715Mb/s across an 80 MHz channel

3.9 Be equipped for 24 or 48VDC operation

3.10 Be FIPS 140-2 Level 2 NIST validated

3.11 Contractor Qualifications: All configuration and integration work must be completed by the Contractor with the following credentials:

3.11.1 The Contractor shall supply equipment in brand new, unused condition. All equipment, including appropriate licenses, must come from Aviat with full United States (U.S.) Aviat warranty and support services. Equipment and appropriate licenses shall be approved for sale in the U.S. by Aviat. All hardware shall be legitimate Aviat brand equipment and not from a third-party source. Unauthorized secondary market or grey-ware equipment is not acceptable.

3.12 The Contractor shall provide radio integration, structural engineering and installation services to range personnel.

3.12.1 Site surveys and installation schedules, range and base access shall be coordinated with range POC upon award. Contractor shall follow all security procedures established to grant access to DoD installations and remote site range facilities.

3.12.2 Drawings, OEM manuals, user guides, installation guides and system configuration files and documentation shall be provided to the listed technical POCs.

3.13 The Contractor shall certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirement. Unless otherwise specified, the Contractor shall warrant that the products are new, in their original box and purchased directly from the Manufacturer. By submitting a response to a Request for Quote (RFQ) or Request for Proposal (RFP), the Contractor confirms to have sourced all Manufacturer products submitted in this offer from Manufacturer or through Manufacturer Authorized Partners only, in accordance with Manufacturer’s applicable policies in effect at the time of purchase. The Contractor shall supply documentation for the microwave radio network components and associated hardware provided. This documentation shall contain instructions on how to operate and troubleshoot the microwave radio network system. The documentation shall be provided on either CD/DVD, or in hardcopy.

3.14 Shipping shall be included in the total cost; proposals for bid shall include manufacturer, model and part number proposed.

The Contractor shall provide the following items:

CLIN Qty UI Manufacturer Part Number Description

END ITEM

0001 4 EA Aviat EV106-H7-H7-100 IRU RFSec Assy MHSB RX

UNEQUAL SPLIT, 3RU V2, HP 7/HP

7 GHZ

0002 2 EA Aviat 179-530090-0111 WG EXT KIT 7GHz 1rst SHLF

1+0/HSB

0003 2 EA Aviat 179-530091-011 WG EXP KIT 7GHz 1+0/HSB

0004 2 EA Aviat EXX-000-204

ECLIPSE, INTELLIGENT NODE

UNIT 2RU, INC IDCE, FAN, NCCV2,

HIGH OUTPUT

0005 2 EA Aviat 179-530064-001 KIT BRACKET 2RU

0006 2 EA Aviat EXS-002

NODE PROTECTION CARD, HIGH

OUTPUT

0007 8 EA Aviat EXR-660-002 RAC 60E, QPSK-256 QAM, High Gain, No XPIC, ACM and SYNC-E

0008 4 EA Aviat EXD-181-002

DAC GE3 GIGABIT ETHERNET

SWITCH CARD

0009 4 EA Aviat EXD-161-002

ECLIPSE, DAC 16XE1/DS1 V3,

PROTECTABLE

0010 4 EA Aviat 037-579408-003 2x HDR-E50 TO Y JOIN TO 24AWG

FREE END 3.5M

0011 2 EA Aviat EZE-08007 NODE SW LICENSE, 800 Mbps

TOTAL RADIO PAYLOAD

CAPACITY

0012 2 EA Aviat EZF-01

LAYER 1 LINK AGGREGATION

NODAL ON DAC GE / DAC GE3

0013 2 EA Aviat EZF-02

ADAPTIVE MODULATION NODAL

RAC60/6X/60E/6XE

0014 2 EA Aviat EZF-03 SECURE MANGEMENT, INU, inc

SNMPV3 NODAL

0015 2 EA Aviat EZF-04

PAYLOAD ENCRYPTION NODAL

RAC60/6X/60E/6XE

0016 2 EA Aviat EZF-06

RADIUS CLIENT, NODAL

CENTRALIZED USER ACCT MGMT

0017 2 EA Aviat EZF-09

SYNCHRONOUS ETHERNET

NODAL LICENSE for DAC GE3

0018 2 EA Aviat EZF-48

STRONG SECURITY FIPS 140-2

COMPLIANT + UC-APL

1 EA Aviat 179-530307-0113

RACK ASSY CRATED, 7'

CHATSWORTH ALUMINUM, 1

BREAKER PNL W/10 BLANK

COVERS AND NO BREAKERS

0020 1 EA Aviat 179-530307-0123

RACK ASSY CRATED, 7'

CHATSWORTH ALUMINUM, 2

BREAKER PNL W/10 BLANK

COVERS AND NO BREAKERS

0021 2 EA Aviat

COMMON-

BREAKERS-RACK

COMMON BREAKERS &

BLANKING PLUGS PER RACK PER

DRAWING

0022 4 EA Aviat 079-422656-001 GIG ETH SFP, OPT SMF 1310nm LC

1000BASE-LX, <10 KM

0023 8 EA Aviat 037-579133-001 SIMPLEX 10M SM LC TO LC

0024 2 EA Aviat 037-579461-500

CABLE PROT / BRIDGEING GE3,

DIRECT FIT, 500mm (747420016)

0025 2 EA Aviat

AND-VHLP6-7W-

6WH

ANTENNA, 7/8 GHZ, 1.8 M (6FT),

VALULINE, HPLP, REMOTE

MOUNT, DISH (STD: WHITE), 7.125

- 8.5 GHZ, RADOME (STD: GRAY)

WITHOUT FLASH, SINGLE POL.,

CPR112G, CLASS III/FCC101B,

SINGLE PIECE REFLECTOR, 180

KMPH, 250 KMPH (VHLP6-7W-

6WH/D)

0026 2 EA Aviat AND-520570-10

INBOARD SIDE STRUT KIT FOR

6FT MICROWAVE ANTENNAS; 10.5

FT

0027 2 EA Aviat 179-530147-001

LEG MOUNT,UP TO 6 FEET

ANTENNA DIAMETER,UP TO 8

INCHES DEPTHIAMETER

LEG,WITH WAVEGUIDE

EQUIPMENT PROTECTION SHIELD

KIT

0028 470 EA Aviat AND-EW77-F

ELLIPTICAL WAVEGUIDE

STANDARD, 7.125-8.5 GHZ, BLACK

PE JACKET, PER FOOT

0029 4 EA Aviat

AND-

EW77INSTALL-KIT

EW77INSTALL-KIT (ONE KIT PER

WAVEGUIDE RUN)

0030 5 EA Aviat

AND-HARDWARE-

KIT

HARDWARE-KIT (ONE KIT PER

100FT)

0031 16 EA Aviat VLT-SREW772-K

WAVEGUIDE CUSHION HANGER,

KITS, EW77/EWP77, 2-HOLE (BAG

OF 5 KITS)

0032 4 EA Aviat AND-WGB4-77

WAVEGUIDE BOOT FOR EW77, 4

IN (WGB4-77)

0033 2 EA Aviat RFS-10042204

Automatic Dehydrator, RFS, field adjustable output pressure 1-10 psig, e/w 1 outlet, input 120 VAC, 0.7 SCFM at 60 Hz, 0.58 SCFM at 50 Hz, 6 RU, 19” wide, (9.5” H x 13.5” W x 9.5” D), form C relay

0034 2 EA Aviat RFS-920204

GAS DISTRIBUTION MANIFOLD

KIT; 0-15 PSIG GAUGE, FOUR

PORT, MODEL GDM-4

0035 2 EA Aviat RFS-SHELF-APD-D

WALL SHELF FOR RFS

DEHYDRATORS APD-D SERIES

(SHELF-APD-D)

0036 1 EA Aviat SVCS-IN-SIPQ-RI RADIO INTEGRATION

0037 1 EA Aviat SVCS-IN-SS-CEDFT

CONFIG ENG / DOCUMENTATION /

DRAFTING

0038 1 EA Aviat SVCS-PN-EN-SE

NETWORK/SYSTEM

ENGINEERING

0039 1 EA Aviat SVCS-PN-EN-XE

TRANSMISSION ENGINEERING -

Includes PATH SURVEY

0040 1 EA Aviat SVCS-IN-SS-PE

PROJECT/SITE ENGINEERING -

Includes SITE SURVEY

0041 1 EA Aviat SVCS-IN-PM-PM PROGRAM MANAGEMENT

0042 1 EA Aviat SVCS-IN-IC-AS ANTENNA SYS INSTALLATION

0043 1 EA Aviat SVCS-IN-IC-FI RADIO INSTALLATION - Included rack installation materials

0044 1 EA Aviat SVCS-IN-IC-AS EQUIPMENT DECOMMISSIONING

0045 2 EA Aviat SVCS-IN-SS-ST STRUCTURAL ENGINEERING

0046 8 EA Aviat

SNA-

BWXXA1003638

WARRANTY PLUS IW- NA&C, 36

MONTHS, IRU-600

ADDITIONAL ITEMS

0047 4 EA Aviat M-EEH-07 ECLIPSE ODU 600, 07 GHz

0048 2 EA Aviat EZF-52 ODU 600 Nodal High power option 2 x

ODU

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

Required delivery date for:

CLINs 0001 to 0046 is 60 days ARO CLINs 0047 to 0048 is 45 days ARO

B. PLACE OF PERFORMANCE

MCAS Yuma

C. SHIPPING ADDRESS

MCAS Yuma, AZ 85369

If using USPS

MCAS Yuma, AZ 85369

D. INSPECTION AND ACCEPTANCE

Inspection and acceptance shall be completed by NSWC Corona Division, Range Systems Department RS28 at South West Tactical Training Range, Yuma, AZ.

E. TECHNICAL POINT OF CONTACT