P01 Technical Specifications.docx

Technical Specifications, mobile generator:

-Must have: Air System: Air-to-air after cooler Air cleaner; single element with service indicator; LH. Turbocharger.

- Must have: Charging System: Battery charger; shock mounted and enclosed in a dust-proof Housing. Charging alternator; 24V-115A, heavy duty with integral regulator.

- Must have: Control Panel Specs:

provides power metering, NEMA 2, IP23 Dust Proof Enclosure UL508A Listed Must have: Ability to view and reset diagnostics of all controls primary CAN Display navigation keys including 2 shortcut keys for engine and generator parameters Emergency Stop Button Panel illuminating lights

- Must have the following Controls:

Run/Auto/Stop Engine cool-down timer Engine cycle crank Voltage & Speed Adjustment Panel illuminating lights Alarm acknowledge Alarm reset Fuel level display for indication in stop and auto modes Regen of DPF Idle/rated speed selection Digital indication for:

RPM

Operating hours Oil pressure (psi, kPa or bar) Coolant temperature (degC or degF) DC Volts Diesel Particulate Filter soot level L-L Volts, L-N volts, Phase amps Average volts, Amps, Frequency ekW, kVA, kVAr (Average,Phase,%) Power Factor (Average,Phase) kW-hr, kVA-hr (total) Excitation voltage and current High exhaust stack temperature/Regeneration in progress Warning/Shutdown with indicating lights for:

Low oil pressure High coolant temperature Overspeed Emergency stop Failure to start (overcrank) Low coolant level High oil temperature Low battery voltage CCEM (Cat Clean Emissions Module) Fault Low fuel level