Over Haul Description 01-626-6770.pdf

FOR OFFICIAL USE ONLY

OVERHAUL DESCRIPTION

ITEM NAME CAMERA SYSTEM,SURVEILLANCE

STOCK NUMBER

PART NUMBER

USED ON

5836-01-626-6770 SHELF LIFE CD

PTZ-3130-PE-R1

WMSL PTZ CAMERA SYSTEM

Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.

OVERHAUL REQUIREMENTS:

NIIN: 01-626-6770

OLD PN: PTZ-3130-PE-R1

NEW PN: PTZ-3130-PE-R2

ITEM: CAMERA SYSTEM,PTZ OEM:

INDUSTRAL VIDEO & CONTROL INC.

CAGE:3BQH5

QTY PER HULL: 8

ESTIMATED REPAIR LEAD TIME 2 MONTH

SPECS:

ID-DIMENSION 36.25" X 29" X 16"

CLEATED ON ALL SIDES.

BASE & COVER THICKNESS 1/2"

SIDE WALL THICKNESS 3/8"

LEGS 4" X 4" AT 27".

REPAIR REQUIREMENTS: REFER TO REPAIR SPECS DOCUMENT; A COPY WILL BE PROVIDED

TO THE OEM BY THE KS / KO

SHIPPING REQUIREMENTS

IV&C MUST AND HAS AGREED TO USE PLYWOOD BOXING WITH LASER FIT FOAM WHEN

SHIPPING TO THE USCG

PACKAGING SPECS:

1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO

PART SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS

SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND

CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE

DURING SHIPPING.

1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH

3.7; 5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)

2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID

MARKING EX: PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE /

MATERIALS AS REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4,

PARAGRAPH 4.1 IDENTIFICATION MARKINGS; BARCODING IS NOT REQUIRED. (PG.21).

2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"

WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH THE

REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING.

END USE: WMSL SURVELLIENCE CAMERA SYSTEM

TECH / KS / KO INFO:

FOB DESTINATION COST IS PRE-FACTORED INTO THE PART COST BY THE ES (EST @ $125

EA)

WARRANTY:

X A. Standard Manufacturer's Warranty

B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.

Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.

GOVERNMENT ACCEPTANCE:

Acceptance will be made at destination by a Government representative.

Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.

OVERHAUL DESCRIPTION

PRESERVATION / PACKAGING:

A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.

X B. See Attachments

PACKAGING AND MARKING FOR SHIPMENT:

A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:

NATIONAL STOCK NUMBER 5836-01-626-6770

ITEM NAME CAMERA SYSTEM,SURVEILLANCE

PART NUMBER PTZ-3130-PE-R1

GOVERNMENT ORDER NUMBER

And the words: "Coast Guard SFLC Material, Condition "A"

X B. See Attachments