ORDERING DATA.pdf
PDF 155 KB Posted
- Attached to
- WELDING ELECTRODE Federal contract opportunity
- Solicitation number
- SPMYM224Q0375
About this file
This document contains four material ordering data sheets for welding electrodes to be procured under solicitation number SPMYM224Q0375 for the Defense Logistics Agency Land and Maritime. The sheets specify that the procurement is for flux cored electrodes in 1/16 inch diameter spools weighing 25-35 pounds each, with a certificate of compliance required. Packaging and labeling must follow Level A standards and MIL-STD-129 requirements. Successful bidders must provide documentation of tests according to MIL-DTL-24403/1 and ensure material traceability and certification including heat or lot numbers.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-24-Q-0375 Amendment 3.pdf | ||
| SPMYM2-24-Q-0375 Amendment 2.pdf | ||
| SPMYM2-24-Q-0375 Amendment.pdf | ||
| QPL (QUALITY PARTS LIST).pdf | ||
| SPMYM2-24-Q-0375.pdf | ||
| EXHIBITS A-H.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-E-24403
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3298-9800
ICN: 38X0513124 KO: S01 KOI: 099
Paragraph 6.2 Ordering Data
A. MIL-E-24403A, ELECTRODES-WELDING FLUX CORED GENERAL SPECIFICATION FOR, dated 21 DEC 1981; AMENDMENT (1) dated 30 AUG 1983; VALID NOTICE dated 23 DEC 2020.
B. Title, number, and date of the applicable detail specification: ELECTRODES – WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL MIL-DTL-24403/1, dated 16 JUNE 2008;
VALID NOTICE 30 DEC 2020
C. Type, form, and sizes and weight required (see 1.2 and 3.2): Form:3B-Electrode on large spool (12in and larger) Diameter sizes (inches): 1/16”, TYPE-MIL-81T1-Ni2M, 25-35 LB SPOOL
D. Quantity: 170 SL
E. Certificate of compliance is required.
F. Level of packaging and packing required (see 5.1 and 5.2): Level A packagingPacked Level A
G. Packaging required for form 4 drums shall conform to PPP-D-723 as follows: NA
H. Slinger ring attachment is not to be provided with cores (see 5.1.1.5).
6.2.1 Electrodes shall be ordered by the pound.
Additional Data Requirements: All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
CMTR shall document tests required per table IV of MIL-DTL-22403/1
A. Spools must be hermetically sealed.
B. Entire order supplied shall be of one heat/lot
C. Material Traceability - The CMTR shall be identified through a unique traceability number or heat-lot number, as applicable, which shall also be marked on the material packaging. The traceability marking on the material packaging shall provide direct traceability to the material's
CMTR.
D. The Certification Material Test Report (CMTR) shall include the applicable unique lot, control, or heat number of the specific lot of consumables supplied. (See Contract Data Requirements List
(CDRL) DI-MISC-82386).
Prepared By: Danya Klabo Code: 250.3
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3298-9801
ICN: 38X0913119 KO: S01 KOI: 099
Paragraph 6.2 Ordering Data
A. MIL-E-24403A, ELECTRODES-WELDING FLUX CORED GENERAL SPECIFICATION FOR, dated 21 DEC 1981; AMENDMENT (1) dated 30 AUG 1983; VALID NOTICE dated 23 DEC 2020.
B. Title, number, and date of the applicable detail specification: ELECTRODES – WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL MIL-DTL-24403/1, dated 16 JUNE 2008;
VALID NOTICE 30 DEC 2020
C. Type, form, and sizes and weight required (see 1.2 and 3.2): Form:3B-Electrode on large spool (12in and larger) Diameter sizes (inches): 1/16”, TYPE-MIL-81T1-Ni2M, 25-35 LB SPOOL
D. Quantity: 170 SL
E. Certificate of compliance is required.
F. Level of packaging and packing required (see 5.1 and 5.2): Level A packagingPacked Level A
CMTR shall document tests required per table IV of MIL-DTL-22403/1
A. Spools must be hermetically sealed.
B. Entire order supplied shall be of one heat/lot
C. Material Traceability - The CMTR shall be identified through a unique traceability number or heat-lot number, as applicable, which shall also be marked on the material packaging. The traceability marking on the material packaging shall provide direct traceability to the material's
CMTR.
D. The Certification Material Test Report (CMTR) shall include the applicable unique lot, control, or
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3298-9802
ICN: 38X1413119 KO: S01 KOI: 099
Paragraph 6.2 Ordering Data
A. MIL-E-24403A, ELECTRODES-WELDING FLUX CORED GENERAL SPECIFICATION FOR, dated 21 DEC 1981; AMENDMENT (1) dated 30 AUG 1983; VALID NOTICE dated 23 DEC 2020.
B. Title, number, and date of the applicable detail specification: ELECTRODES – WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL MIL-DTL-24403/1, dated 16 JUNE 2008;
VALID NOTICE 30 DEC 2020
C. Type, form, and sizes and weight required (see 1.2 and 3.2): Form:3B-Electrode on large spool (12in and larger) Diameter sizes (inches): 1/16”, TYPE-MIL-81T1-Ni2M, 25-35 LB SPOOL
D. Quantity: 170 SL
E. Certificate of compliance is required.
F. Level of packaging and packing required (see 5.1 and 5.2): Level A packagingPacked Level A
CMTR shall document tests required per table IV of MIL-DTL-22403/1
A. Spools must be hermetically sealed.
B. Entire order supplied shall be of one heat/lot
C. Material Traceability - The CMTR shall be identified through a unique traceability number or heat-lot number, as applicable, which shall also be marked on the material packaging. The traceability marking on the material packaging shall provide direct traceability to the material's
CMTR.
D. The Certification Material Test Report (CMTR) shall include the applicable unique lot, control, or
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3298-9803
ICN: 38X0713124 KO: S01 KOI: 099
Paragraph 6.2 Ordering Data
A. MIL-E-24403A, ELECTRODES-WELDING FLUX CORED GENERAL SPECIFICATION FOR, dated 21 DEC 1981; AMENDMENT (1) dated 30 AUG 1983; VALID NOTICE dated 23 DEC 2020.
B. Title, number, and date of the applicable detail specification: ELECTRODES – WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL MIL-DTL-24403/1, dated 16 JUNE 2008;
VALID NOTICE 30 DEC 2020
C. Type, form, and sizes and weight required (see 1.2 and 3.2): Form:3B-Electrode on large spool (12in and larger) Diameter sizes (inches): 1/16”, TYPE-MIL-81T1-Ni2M, 25-35 LB SPOOL
D. Quantity: 170 SL
E. Certificate of compliance is required.
F. Level of packaging and packing required (see 5.1 and 5.2): Level A packagingPacked Level A
CMTR shall document tests required per table IV of MIL-DTL-22403/1
A. Spools must be hermetically sealed.
B. Entire order supplied shall be of one heat/lot
C. Material Traceability - The CMTR shall be identified through a unique traceability number or heat-lot number, as applicable, which shall also be marked on the material packaging. The traceability marking on the material packaging shall provide direct traceability to the material's
CMTR.
D. The Certification Material Test Report (CMTR) shall include the applicable unique lot, control, or
| 32989800 data.pdf |
| 32989801 data.pdf |
| 32989802 data.pdf |
| 32989803 data.pdf |
File details come from the government source that posted it. Updated .