ORDERING DATA 30683807.pdf

Salients Characteristics for Air Gas Industrial Grade Nitrogen, Size 300 High Pressure Steel 16 Cylinder Cradle, CGA-580 P/N: NI CS3 or Equivalent:

Doc #3068-3807/3808/3809

- 16-Pack shall include 16/EA size 300 high pressure steel cylinders.

- Cylinders and cradle shall be rust resistant.

- Cylinders shall be meet specifications for nitrogen fills on the current Air Gas contract at Puget

Sound Naval Shipyard, IDIQ gas contract #SPMYM2-20-D-0006. Cylinders shall be able to be filled under Air Gas CLIN #2001AX, Nitrogen (184 CF), Air Gas P/N: NI MS200916C6JC as this is the company that the shipyard has its industrial gas contract with.

- The cylinder cradle shall have slots built into the bottom of the cradle so it can be transported by a forklift.

The base plate of the cradle shall be constructed of at least 3/16” diamond tread steel plate with 4-sided forklift access:

Dimension for this base plate shall be at least the following: 39.5” height, 48” width, 46” depth. See below for dimensional features:

- Cylinders shall meet the following DOT 3AA-2400 Specifications:

Tapping: ¾-14 NGT Inside diameter (I.D.): 8.75” nominal Outside diameter (O.D.): 9.25” nominal Length: 55” nominal Weight: 132 pounds (LBS.)

Water volume: 2990 cubic inches Service pressure (PSI): 2,400 PSI Test pressure (PSI): 4,000 PSI Oxygen capacity: 307 cubic feet

- All structural members of the cylinder cradle shall be constructed of ASTM A-36 carbon steel unless otherwise stated (U.N.O.) in accordance with standard ASME Y14.36M-1989.

- All fillet welds on the cylinder cradle shall be a minimum of 5/16” U.N.O.

- Cylinders shall be equivalent to Air Gas P/N: NI 300.

- Each cylinder shall come with CGA 580 connections. These are nuts for high-pressure nipples for compressed gas cylinders. The thread size shall be 0.960”-14 and compatible for use with industrial nitrogen and the size 300 high pressure steel cylinders.

- Each Cylinder shall come painted and labeled with the following information to be in compliance with shipyard standards for industrial gas use and storage. Label shall be stenciled in all capital letters:

NITROGEN MIL SPEC SIZE 200 CID A-A-59155 GR A CUSTOMER OWNED CGA 580 FOR

DLA MARITIME- PUGET SOUND

- 16-pack shall include steel cradle with built in pallet for use with a forklift.

- The cradle must be compatible in fit, form and function with the size 300 high pressure steel industrial cylinders.

- The cylinders shall come with a compatible manifold to connect to cylinders for use.

- 16-pack shall come assembled with manifold, cylinders in cradle, and cylinders and cradles shall be painted. Cylinders and rack shall be painted dark grey and information on cylinders shall be stenciled in yellow.

- Carbon steel cylinder cradle shall have the following dimensional characteristics: