Statement_of_Need_for_Solicitation.pdf
PDF 22 KB Posted
- Attached to
- Gyros for NOAA Ship Shimada Federal contract opportunity
- Solicitation number
- NMAN7200-17-01695
About this file
Statement of Need
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 1_DS-17022_Reference_Drawing_OD-438-FE81_IBS_Block_Diagram.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF NEED FOR SUPPLY OR SERVICE < $150K
NMAN7200-17-01695
PURPOSE:
This requisition is to provide a replacement gyro system on NOAA SHIP BELL M SHIMADA.
The gyro system will replace the existing two gyros, and gyro controller on the ship. Highly reliably, maintenance free gyros are required to reduce down time due to gyro failures and to eliminate maintenance costs associated with existing mechanical gyros.
TECHNICAL SPECIFICATIONS:
The replacement gyro system, including the electrical, mechanical, and digital interfaces must be compatible with the existing gyro system on Shimada. The ship gyro system drawing is attached for reference.
Ship Drawing: OD-438-FE81 IBS Block Diagram
Requirements:
1. Two Gyros
2. Gyro interface unit
3. IMO certified gyros
4. ISO 9001 certified manufacturing
5. No maintenance required over the life of the gyros
6. Gyro Mean Time Between Failure - 150,000 hours or greater
7. Gyro Warranty - 5 years or more
8. Technical Support - 24x7 telephone and email
9. Heading Accuracy 0.25 degrees (secant latitude) or better
10. Roll and Pitch Accuracy 0.1 degrees or better
11. Operating Temperature 10 to 120 degrees Fahrenheit or better
12. Heading – 0 to 360 degrees
13. Roll +/- 180 degrees or better
14. Pitch +/- 90 degrees or better
15. RS232 input/output
16. Data Formats supported – NEMA 0183, ASCII and Binary
17. Data rate 1 to 200 Hz
18. Ethernet interface for gyro display, setup, control and data logging.
19. Power – 20 Watts or less for each gyro
20. Must supply a Gyro Interface Unit to connect with existing ship systems
21. Gyro Interface Unit must interface the two new gyros with existing ship systems without requiring changes to any existing data interfaces.
22. Supply Support – Vendor must stock at least one spare gyro within the US for shipment within 24 hours to support NOAA CASREP requirements.
DELIVERABLE SCHEDULE:
No later than Nov 17, 2017 to meet ship dry dock schedule.
NOAA MOC-P/MOE
Marine Operations Center - Pacific
2002 SE Marine Science Dr.
Newport, OR 97365
NOTE: This is not a brand name requirement. Market research has shown that iXblue currently manufactures gyros that meet the above requirements, through any manufacturer product by any manufacturer is welcome for consideration.
File details come from the government source that posted it. Updated .